Question about 1991 Honda Accord

Open Question

Cam marks for a 1991 honda accord 2.2 liter single overhead cam

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 71 Answers

SOURCE: need to set the valves on 92 honda accord 2.2

you can buy the manual and it gives the specs. clearance for cold lash and hot.

Posted on Apr 26, 2010

  • 14 Answers

SOURCE: how to line crank and cam for timing belt on 1988 no crank marks

Hard to explain here... but I believe that car also has the balance shaft which needs to be timed as well. The camshaft has 2 lines which line up to the top of the head, and a "up" or "top" mark at the top.
Crank is set to 0 degrees.

Posted on May 02, 2010

walleyracing
  • 76 Answers

SOURCE: where is the 2nd o2 sensor on a 1997 honda civic

One is just above the catalytic converter the 2nd is just past the cat. on down pipe.

Posted on May 04, 2010

pctech1
  • 1940 Answers

SOURCE: Can I time the engine

You should remove the Crankshaft Pulley, because you have to remove the Timing Belt Cover to remove the belt, adjust tension, and line up the Timing Marks.

Here is the Service Guide for the Timing Belt on your 1994 Honda Civic 1.5l SOHC Engine:
http://www.4shared.com/document/TC9t2rMv/1992-1995_Honda_Civic_SOHC_Tim.html

Posted on Mar 28, 2011

sodeep
  • 3267 Answers

SOURCE: What is the torque and pattern for the cam bolts

check this site

Posted on Jul 08, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to set a timing belt on the 2 sprockets of the twin cam Honda ballade 180i engine of 1995 model? And how to position the cam lobes on the valves?


your honda sprocket have 1 slot in of the gear.if you c that.you have facing that two slots.and u look the plastic cover theres arrow or you see your head level your slot or timing mark.you dont problem crankshaft bcoz they have timing mark.

Aug 19, 2015 | Honda Cars & Trucks

2 Answers

Need timeing marks for a 1997 honda accord 2.2 liter non v-tec


cam

why not say what job.?
or spark, see? we just cant guess.that.
no matter, its on alldata.com
if in usa, that not stated either, so fail 2 times, i do.

Dec 16, 2014 | 1997 Honda Accord

1 Answer

How to replace a coil on a 1998 sable


Hello Loren.
There are two different engines on the Sable that year. Both 3.0 liters but one has a dual overhead cam engine.
I'll go with the more common single overhead engine.
Squeeze the tabs to remove the ignition cables from the top of the coil. It would be a good idea to mark which one goes where first.
Then undo the capacitor connector. Undo the four retainer screws.
Reverse to reinstall.
Apply a film of di-electric grease to the coil towers before you put on the coil wires.

If yours is the dual overhead cam, let me know here in comments and i will give you directions.

Thank you for using FixYa.
KL

Feb 20, 2011 | 1998 Mercury Sable

2 Answers

Need to know how the timing marks are set on a 91 honda accord


I assume your talking about the timing belt marks for the crank and cam,heres a diagram to help you.6d7e9bc.gif86bd7b3.gifb7e773c.gif

Oct 01, 2010 | 1991 Honda Accord

1 Answer

Need to set the valves on 92 honda accord 2.2 liter single over head cam


you can buy the manual and it gives the specs. clearance for cold lash and hot.

Apr 26, 2010 | 1992 Honda Accord

3 Answers

How can i tell if my 1994 nissan maxima is single or dual cam?


Pretty easy to tell even without taking the valve cover off.
If it is a dual cam, then the spark plugs are lined up right down the middle, between the 2 cams.
Which is optimal.
If it is a single cam, the plugs have to be off to one side, on an angle.
Which is not as good.

Aug 09, 2009 | Nissan Maxima Cars & Trucks

1 Answer

I have a 1996 Honda Accord and I have replaced the timing belt...I need to know if anyone can help me with the camshaft and crankshaft markings.


There should be markings on the gears or pulleys for both parts. It would be a diamond or dot. The top part should be your cam and the mark would go on the bottom directly over the mark on the crank. The crank mark should be at high noon. They should not offset, they should be directly inline. Single overhead cam only.

Jul 07, 2009 | 1998 Honda Accord

1 Answer

Set timing


v teck or single, single cam says up on it crank has 2 b on combustion duall cams r facuing each other crank d same
easy call me 559 5796874 california

May 25, 2009 | 1995 Honda Accord

Not finding what you are looking for?
1991 Honda Accord Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...