Question about 2003 Ford Focus

Open Question

Remove headlight assembly 2006 ford focus - 2003 Ford Focus

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: Removing Headlight Assembly on 2003 Ford Focus Ultimate Edition

Jack up the front of the vehicle. Secure the vehicle with at least once JACK STAND. Open the hood of the car. Remove the front grill. Remove the fasteners on the head light assembly that are located on the exposed inner fender and the one that was under the front grill. Lay on your back and look between the front fender and the head light assembly. You only have about 4 inches. Remove that screw. All screws are either Phillips or torks.

Posted on Dec 27, 2008

Ad
  • 1 Answer

SOURCE: Removing Headlight Assembly on 2003 Ford Focus Ultimate Edition

see

Posted on Mar 16, 2009

  • 1 Answer

SOURCE: cant remove the headlight assembly from a 1998

You have to basically remove the bumper cover in order to do this.
You will need a 10mm socket with a couple extensions and a phillips screwdriver.
First remove the plastic shield inside the wheel well using the phillips screwdriver.
There are 3 10mm bolts that have to be removed the attach the bumper cover to the fender. The first one is just inside the newly uncovered hole. For the other 2 you will need the extensions. They are located all the way back in the hole beside the headlight assembly. If you look in with a flashlight You will see 3 bolts down in there. One of them will have a 1/2 inch spacer on it. Do not worry about this bolt, it holds the header panel on. The other 2 bolts are the ones you need to remove. Once this is done, if you need to remove the bolts under the hood that hold the bumper cover on the header panel. You should now have adequate movement to move the bumper cover out of the way of the 3 10mm bolts on the headlight assembly that were blocked.

Posted on Apr 05, 2009

tneubauer
  • 437 Answers

SOURCE: Broken headlight assembly

Remove the upper bolt

2f19891.jpg

Then the 3 lower ones. Then this assembly should slide out.

cf1104f.jpg

Posted on Jun 09, 2009

  • 93 Answers

SOURCE: Need to replace headlight assembly on 2005 Ford Escape

ithere are 4 bolts that hold it in...the top 2 are obvious..the others are behind the bumper. the bumper must be removed to acces them...here are the manuals instructions..

n0037234.gif
Item Part Number Description 1 — Headlamp assembly bolts (3 required) 2 — Headlamp assembly nut 3 13008 Headlamp assembly 4 14290 Electrical connectors
Removal and Installation
NOTE: Make sure the headlamp switch and the ignition switch are in the OFF position.

  1. Remove the front bumper cover. For additional information, refer to Section 501-19.
  1. Remove the 3 headlamp assembly bolts.
    • To install, tighten to 5 Nm (44 lb-in).
  1. Remove the headlamp assembly nut and the headlamp assembly.
    • Disconnect the electrical connectors.
    • To install, tighten to 5 Nm (44 lb-in).
  1. To install, reverse the removal procedure.

Posted on Jun 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Headlights wont stay on.


Check your auto light sensor could be faulty

Jan 03, 2014 | 2006 Ford Focus ZX4

2 Answers

How to replace a 2001 ford focus headlight switch assembly


p, li { white-space: pre-wrap; }

Turn the engine off, open the hood, and disconnect the negative battery cable (--) with your pliers.



Locate the power distribution box against the firewall on the driver's side of the engine compartment. Flip up the latch and remove the plastic cover.



Determine which headlight fuse you want to replace. The 2001 Ford Focus uses four headlight fuses--one for each headlight. Fuse number 16 is for the passenger side low beam; fuse number 17 is for the driver's side low beam. Fuse number 26 is for the passenger side high beam; fuse number 27 is for the driver's side high beam.



Grasp the fuse with your fingers and pull it straight out of its mount. Insert the new fuse in its place. Replace the plastic cover and reconnect the negative battery cable.

Sep 26, 2010 | 2001 Ford Focus

1 Answer

How to change a front light bulb


p, li { white-space: pre-wrap; }
  • Ensure that the headlights on your Ford Focus are off by checking you have turned the headlight control all the way to the off position. Make sure your car is off and the keys are out of the ignition, so the daytime lamps are also off.
  • Open the hood using the hood release handle located inside the vehicle under the steering wheel on the left side of the instrument panel. Walk around to the front of your Ford Focus and release the auxiliary latch located under the front of the hood. Lift the hood and secure it in place with the yellow end of the hood's strut in the designated holes.
  • Locate the bulb cover found just behind the headlight assembly and remove it by turning it counterclockwise. Swivel the wire clip that hold the bulb and connector in place out of the way by turning it to the left.
  • Pull out the headlight bulb with its electrical connector straight out from the headlamp assembly.
  • Disconnect the bulb from the connector. Later editions of the Ford Focus may have a retaining ring that lies between the bulb and electrical connector. Simply remove this retaining ring by twisting it off with a counterclockwise turn.
  • Install the replacement headlight bulb in reverse order of removal. Use a HB2 replacement bulb for models older than 2004 and a HB5 bulb for models produced since 2005. Replace the wire clip and bulb cover, as well.
  • Turn on your Ford Focus and check that the headlights are working properly after closing the hood.

Aug 26, 2010 | 2003 Ford Focus

1 Answer

Changing a headlight on a ford focus 03


headlight bulb or assembly? remove the fender splash shield lower retaining screw. Push the fender splah shield to inside. Remove the headlamp assembly lower retaning bolt. Remove the grille. Remove the head lamp assembly

Jun 21, 2010 | 2001 Ford Focus

2 Answers

How to get headlamp out from ford fiesta 03


If you're just replacing the bulb, you access it from the rear of the headlight assembly. Just sqeeze the nylon locking device, and turn it counter clock wise, then pull the bulb out, and replace.

Dec 27, 2009 | 2000 Ford Focus

1 Answer

How do I remove the drivers side headlamp assembly from a 2006 Ford Focus ZX3?


Open the hood and inside you will find plastic screw ( locks) like.

Nov 10, 2009 | 2006 Ford Focus

1 Answer

How to replace head light for 2006 ford focus


I can help you but I need to know if you want to replace the whole headlight assemble or do you just want to replace the bulb. Let me know.

Apr 14, 2009 | 2006 Ford Focus

2 Answers

Removing Headlight Assembly on 2003 Ford Focus Ultimate Edition


Jack up the front of the vehicle. Secure the vehicle with at least once JACK STAND. Open the hood of the car. Remove the front grill. Remove the fasteners on the head light assembly that are located on the exposed inner fender and the one that was under the front grill. Lay on your back and look between the front fender and the head light assembly. You only have about 4 inches. Remove that screw. All screws are either Phillips or torks.

Dec 24, 2008 | 2003 Ford Focus

4 Answers

Hi ford focus 2006 in ireland, want to change headlight bulb, but how do i get to it?


The owners manual does tell you - but it is not obvious.
Unscrew the headlight unit - 1 screw
Push down the 2 retaining clips at the back of the unit to release them (long screwdriver needed
Remove the headlight unit so you can work on it - it will come out - try getting the end in the middle of the car out first rather than the wing side
The rest is easy as you have space to work.

It is easier to put the unit back than take it out apart from the clip on the wing side !

Enjoy

Dec 13, 2008 | 2006 Ford Focus

Not finding what you are looking for?
2003 Ford Focus Logo

Related Topics:

505 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...