Question about 1998 Jeep Grand Cherokee
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2005 Jeep Grand Cherokee Problem
I would start by checking all the fuses under the hood.
There is a fuse called IOD which the factory leaves out and gets put in at the dealer.
That fuse could be bad.
Posted on Oct 31, 2008
I just had the same with mine, pull the rubber boot back on the drivers side front door and look for a severed wire, mine was black...simply spliced the wires back together and problem solved!
Posted on Mar 23, 2009
You need to remove all the skrews from the door. Normaly there is one in the handle of the door, one behind the in door lach handel and one under the bump out for the arm rest on the door. Than you need to take a flat head skrew driver slowly priying the panel off. There are plastic clips on the backside of the panel it is ok if you brake a few.
Posted on May 01, 2009
Trouble Code: P0113 (4.0L L6 VIN S Auto)
IAT Sensor Circuit High Input Print this code data Number of Trips to Set Code: 1
OBD II Monitor Type: CCM Details
Indicators: MIL Details
Check with ignition on or engine running; battery voltage more than 10v; The PCM detected the IAT Sensor input was over 4.90v (exc. Dakota, Durango, Ram) or 4.98v (Dakota, Durango, Ram) for 3 seconds.
Posted on Dec 01, 2009
Tips for a great answer:
Jul 13, 2013 | 2005 Jeep Grand Cherokee
Aug 22, 2011 | 1999 Jeep Grand Cherokee
Feb 09, 2011 | 2006 Jeep Grand Cherokee
Sep 22, 2010 | 2005 Jeep Grand Cherokee
Sep 12, 2010 | 1996 Jeep Grand Cherokee
Aug 28, 2009 | 1994 Jeep Grand Cherokee
Jul 20, 2009 | 1998 Jeep Grand Cherokee
176 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: