Question about 2000 Dodge Intrepid
I can hear the control arms moving but i cant get the air to the window to defrost the front window. Heat comes out of the vents and its good and hot. and the cold air works but it just will not blow on the windsheild.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Sounds like the air "blend" door might be inoperable. This door opens and closes a specified amount to regulate the amount of either cooled or heated air, as requested by the climate control unit. If the door is continually in the position which is bypassing the heater core (cold setting), the air will not get warm regardless of the condition/operation of the heater core. I'd suggest having this component checked.
Posted on Nov 28, 2008
SOURCE: Heater doesn't blow hot air
First check the coolant level in the radiator. Check your heater core hoses on the firewall underneath the hood. Let the car come up to temp. and feel the two hoses. If only one of them is getting hot you may have bad heater core or a bad heater control valve.
Posted on Jan 05, 2009
if vent doors are operated by vacuum check for loose or broken vacuum hoses in the engine compartment , or check the fuse box for any ac/heat fuses if it is a electricaly controoled system
Posted on May 04, 2009
Hope you have the same set up, sure you do. You may have either crossed your vaccum lines or when you were putting your heater/ac box back together or you may of pinched the vents somewhat closed. Cycle through the different zones to ensure the vents are moving as your are selecting (defrost, floor, ect...) If you think the vaccum lines are correct then you may have a reassembly issue with the Heater/ac box. I had the same problem with my 2000 Dodge Ram 4x4. Use the KISS rule "keep it simple stupid" start with the vaccum lines and all your wiring to the motors, make sure everything is plugged in. Hopefully you'll find it there before going back into the box again.
Posted on May 05, 2009
I just found my problem that often brings in a Check Engine light, and reads out a PO 442 code. When my A/C is on my heater would start working because a vacuum operated control door would slam shut when accelerating. Also my cruise control would stop when going up a large incline.
the first thing to check, and easy is the cruise control for a bladder leak. Look on the top side passenger side of the firewall, and you will find a three way vacuum hose connection. One will be a very small black plastic line that runs to the cruise vacuum actuator. Pull this hose loose at the fire wall connection. Blow in this hose, and if it will not hold pressure, and in my case I could hear air passing through it is defective needing replacement. Block off the firewall connection for A temporary fix.
Posted on May 08, 2009
Tips for a great answer:
Feb 19, 2012 | 2000 Daewoo Lanos
Oct 07, 2011 | 2002 Dodge Intrepid
Nov 16, 2010 | 2000 Dodge Intrepid
Apr 15, 2010 | 1999 Dodge Intrepid
Mar 10, 2009 | 1997 Ford Windstar
Mar 10, 2009 | 1997 Ford Windstar
Jan 18, 2009 | 1997 Chevrolet K1500
Mar 07, 2017 | 2000 Buick LeSabre
97 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: