Question about 1999 Chevrolet Express

Open Question

How to access the check engine light bulb in chevy van

Posted by on

6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 55 Answers

SOURCE: check engine light

I believe this is an evaporative system leak such as a loose gas cap or leak in an evaporative system line.

Posted on Oct 18, 2008

  • 135 Answers

SOURCE: 2001venture van service engine soon light stays on

most any sensor going bad can cause the check engine light to come on,try disconnecting the posative battery cable for 15 seconds ,then put it back on,will reset the codes, or take it to auto zone,they will test your computer for codes at no charge to you.i had a venture van my was ox. sensor. thanks robert b.

Posted on Jun 17, 2009

  • 1 Answer

SOURCE: check engine light emission leak

youll have to take it a shop and have them fill the system with "smoke" and examine the entire system for the "smoke". the smoke will pour out from where ever it is leaking from

Posted on Jul 15, 2009

  • 17970 Answers

SOURCE: how do you reset the check engine light in a 2001

Reset the ECU / PCM for Check Engine light removing the neg battery cable for 5 minutes to reset the codes. If the warnin glight come on again, I suggest scanning you vehicle for details, one fault is in there.

Good luck (remember rated this help).

Posted on Oct 30, 2009

  • 6826 Answers

SOURCE: How do you turn the check engine light off on a

You need a code reader,go to auto zone,they will read it,and erase the codes also.

Posted on Apr 11, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to check dashboard lights in a 97 GMC Safari Van

The bulb on the check engine light may have failed. Pull out the dash instrument panel and check light condition from the rear.

Nov 18, 2012 | 1997 GMC Safari

1 Answer

2000 chevy van full size, no brake lights

Poor ground or no power at bulb. Check for ground and continuity of wiring leading to brake light bulbs.

May 07, 2012 | Chevrolet G20 Cars & Trucks

1 Answer

1995 chevy astro van dash lights and interior lights don't work. bulbs aren't blown I checked. I also checked fuses.

the CGR LTR/DM fuse powers the dome / instrument lights. did you check voltage going into and out of dimmer switch.

Sep 22, 2011 | Chevrolet Astro Cars & Trucks

1 Answer

Help fixing no RR signal and brake light on 2003 Chevy Express van

Check the bulb first, both lights run off the same bulb. If the bulb is good there should be a black wire running off the back of the light socket. That is the ground. Make sure it has good contact with the truck,basically bare shiny metal to metal. The socket could also need to be replaced, sometimes they will corrode or break . Hope this helps.

Aug 07, 2011 | 2003 Chevrolet Express

1 Answer

1998 Chevy hi top van brake lights not working bulbs and fuse are good what should I check next

check the circuit board. This is the strip that holds your light bulbs and has two screws holding it to the tail light lens. they do go out i just replaced both of mine.

Apr 27, 2011 | 1998 Chevrolet K1500

1 Answer

Running light problem on chevy express 3500 box van

Vehicle electric trouble shooting is the worst. Some of the problems you described the bulbs may have multiple filiments with only some burned out. It may sound silly but change the bulbs. Get a couple of new bulbs and try them in the different spots. Time, road vibrations and spring pressure causes the contacts on the bulbs to wear until they get a poor connection then you get a little arcing that build up a residue and a bulb that test good doesn't work.
Your on the right track with the ground wire. Try a test lamp with a good gound connection and test the different sockets, if your test light works but your bulb doesn't you have a ground fault. If neither work check the switch and fuse before you start tracing the wiring. These are just general trouble shooting tips It's very hard to trouble shoot electrical problems sight unseen.

Jun 13, 2010 | 2002 Chevrolet Express

1 Answer

'check engine' light bulb not working. Whats required to fix.

In order to access the bulb yopu must remove the instrument cluster, most likely the bulb is loose, also check for a bad fuse, it may have a seperate fuse for the CEL, not sure on your model.

Nov 25, 2008 | 1997 Dodge Ram 2500 Club Cab

Not finding what you are looking for?
1999 Chevrolet Express Logo

Related Topics:

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides