Question about Suzuki Jimny

Open Question

How do you take a steering wheel off without setting off the airbag

How do i take the steering wheel off without setting the airbag off, basically i need to replace my indicator stalks as someone broke into my car and snapped them off.................... please, please, please help!!!!!

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

moparownr
  • 667 Answers

SOURCE: '99 Aleroc airbags popped -can I replace steering wheel?

you can replace just the air bag portion of the steering wheel if you want, yes you can get them used, when you start your replacement procedure be sure that the battery is disconnected to prevent accidental firing of the replacement

Posted on Mar 23, 2009

  • 6982 Answers

SOURCE: need to remove steering lock from the column

If you can get someone to help, you can have them press down on the metal lock plate and you can then remove the small wire snap ring on the post.using a small pick or screwdriver. There is a too for this but I made one from a large thick flat washer with two drilled & threaded holes with 1/4 " bolts.(looks like an odd little puller) I adjust it against the plate and use the column nut to depress the unit to access the snap ring.

Posted on Apr 04, 2009

r_mcalhoun
  • 166 Answers

SOURCE: airbag light on, horn doesn't work,something

sounds like the clock spring in the steering col

Posted on Apr 06, 2009

emissionwiz
  • 75051 Answers

SOURCE: peugeot 307 hdi 110bhp 2003 , horn wont work ,can

Disconnect the battery for 30 minutes, this will disarm the airbag system and then u can change the part.

Posted on Apr 21, 2009

  • 11 Answers

SOURCE: peugeot 307 hdi 110bhp 2003 , horn wont work ,can

whatever you do, do not take the steering wheel cover off, if you do set off the airbags it will cost 100s of pounds to get them re-packed. Check to horn itself, its usually in the shape of a flat circle and located somewhere in the engine bay, check the wires are connected to this, if they are, also check the wires going to the horn button

Please rate my help, thanks

Posted on Apr 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fit new steering wheel without setting air bag off


Always disconnect the car's negative battery cable before any major repairs or maintenance. For the airbags, take out the PCM fuse from the interior fuse box as well. The airbag mounting holes are at opposite sides of the steering column; etc----------------------------------------------------------------
tacho pro 2008

Nov 21, 2012 | 2002 Hyundai Santa Fe

1 Answer

Steering wheel removal


Disarm the Steering wheel SRS Airbag module by disconnecting the battery negative for 5 minutes, the remove the module bolts at rate of steering wheel with thin walled deep 8mm 1/4" drive socket. Next pull the airbag off the wheel and careful unlatch the connector lock and set the Airbag aside, then remove the lock ring and then the steering wheel nut on the steering sector shaft threaded end, you will now need a steering wheel puller to remove the pressed on wheel from the shaft. You can buy a puller from most parts stores for about $10.00

Jul 03, 2012 | 2011 Ford Transit Connect

1 Answer

What is the clock spring behind steering wheel and where do i get a new one?


The clock spring is the device that transfer power through the rotating steering wheel to the airbag, horn, and other misc, switches that may be on the steering wheel. Your local dealer will have them. Your local parts store may as well. You will need to remove the airbag and the steering wheel to replace this item. You will need a steering wheel puller, a snap ring plier, and a basic set of tools to complete the project. Let me know if you have any questions and I'll do my best to answer them. Thank you for using FixYa.com!

Feb 05, 2012 | 1998 Jeep Grand Cherokee

1 Answer

I need to replace the multi-function wiper switch on a 2003 Chev express van, what type of screw driver is needed to remove the steering column housing that contains the switch?


the switch is underneath the steering wheel. the steering wheel needs to be pulled to replace the switch. the airbag is in the steering wheel, and a trained tech with a puller is needed to pull that wheel off without screwing up the airbag.

Oct 30, 2010 | 2003 Chevrolet Express

1 Answer

How do you change out the lock and key switch. can it be done without taking the steering wheel off.


NOPE IF KEY SWITCH LOCK CYLINDER IN STEERING COLUMN THE STEERING WHEEL AND AIRBAG IN STEERING WHEEL HAS TO BE DISARMED AND DISCONNECTED AND REMOVED.YOU CAN DISARM AIRBAG BY FIRST TURNING OFF RADIO THEN DISCONNECT NEGATIVE BATTERY WAIT 20 MINUTES FOR AIRBAG DISCHARGE BEFORE REMOVING IT.YOU WILL NEED A STEERING WHEEL PULLER.DONT USE HAMMER OR YOU WILL COLAPSE THE STEERING COLUMN.

Oct 20, 2010 | 1998 Oldsmobile Eighty Eight

1 Answer

How do you change the steering wheel on the bf falcon without setting the airbag off?


First disconnect the battery positive lead. Then you will have to remove the lower steering column shroud - philips screwdriver. Then you will see two tork screws behind the steering wheel. Remove these and the airbag will come out. Disconnect the three elect' plugs and the airbag will come free. Wheel centre bolt is also a tork bolt but I used an imperial allen key (5/16 if I remember correctly) to loosen it but didn't take it right out. Then a wheel puller with the centre screw resting against the tok bolt head to loosen the wheel, (two metric bolts screw into the wheel hub) remove the puller, remove the tork bolt and the wheel should come off easy. Good luck.

Jan 16, 2010 | 2005 Ford Futura

1 Answer

Airbags


You may need to call several salavage yards, but there should be one out there that will sell you one without the air bag. If your steering wheel isn't damaged, you might be able to disconect the air bag from the steering wheel.

May 15, 2009 | 2004 Chevrolet Cavalier

2 Answers

Peugeot 307 hdi 110bhp 2003 , horn wont work ,can i take steering wheel cap off without setting off airbag i think the problem is behind it ?


Disconnect the battery for 30 minutes, this will disarm the airbag system and then u can change the part.

Apr 21, 2009 | 2005 Peugeot 405

1 Answer

Horn press panel on steering wheel


remove the airbag !!! but disconnect the battery first and leave it for 10mins or so every thing is behind the airbag.

Dec 30, 2008 | 2004 Volkswagen Golf

1 Answer

2002 jeep grand cherokee


Basicly you have to take apart the steering column cover and the switch is held in place with screws.
If you have to take the steering wheel off, it is best done by a qualified tech. There is an airbag in the steering wheel that has to be disconnected. THIS AIRBAG CAN GO OFF, PLEASE DO NOT TRY THIS YOURSELF!!!!!!!

Sep 16, 2008 | 2002 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...