Question about 1995 GMC Yukon

1 Answer

95 gmc yukon tailights not working

Hey so I have a 95 gmc yukon. I really need help, because the guy I bought it from wired of his stereo horribly, and he said he heard a loud pop and the stereo stopped working along with the tail lights. First thing I thought was its just a fuse. I changed the fuse out and again POP the fuse blew, but before I had changed the fuse the dashlights wouldn't work and now they work, and its just the tail lights. Do I need to trace the wiring under the dash? I need a wiring diagram to know which is the tail light wires. All help appreciated thank you. Btw I thought about putting a new switch in it for the headlighst tailights etc. but I figured since the fuse kept blowing it would just ruin that if it was that.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GMC Master
  • 12,488 Answers

You can find wiring diagrams at http://www.bbbind.com/free_tsb.html free ! Enter your vehicle info. year , make , model an engine size . Under system click on lighting , subsystem click parking lights . Do the stop lamps work ? Turn signals etc.... Which fuse blows ? Also check fuse box diagram under power distribution ,fuse box .to see what all that fuse powers

Posted on Mar 25, 2017

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 26 Answers

SOURCE: 1996 GMC Yukon 5.7 Brake and

have you checked all the bulbs? you can check the turn signal lamps by simply turning on the four way flasher. if all four lamps are flashing, then check the turn signal flasher unit. GM usually put them on the fuse box under the dash. check the owners manual.
check the brake lamp switch. it is mounted under the dash half way up on the brake pedal lever.

Posted on May 03, 2011

  • 14585 Answers

SOURCE: need free wiring diagram for

Check Autozone.com They have some schematics. I check there before I buy mine at alldata. I don't have yours or I would give it to you.

Posted on Aug 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1996 GMC Sierra 4X4 truck, have had a harsh 1/2 shift after 8-12miles of driving. Yesterday started engine put in drive accelerated slowly turning out of driveway felt/heard loud mechanical clang...


Hey Dennis.
Opppsss.. was this transmission serviced regularly?..no, ok.. this is a common problem, you will need to take it to s QUALIFIED PROFESSIONAL to get the trans rebuilt..
If you live near a local drag strip, go there, ask the drag race mechanics who the best transmission man there is?? There is always one or two the drag racers relay on.. I would trust him to get it done right (BEFORE I would trust a "chain" transmission store!!!!!)
I, personally, have had two transmissions do this.. one a 96 suburban and a 95 Silverado.(both inherited and never serviced).. I found the guy that did mine this same way.. GLAD I DID.. it was less $$$$ and great work!! If no drag strip.. ask the custom car guys...

Jun 13, 2017 | 1996 GMC Sierra

1 Answer

MY 1999 GMC YUKON THE FUSE FOR THE TAILIGHTS AND DASHE BLOWS EVERTIME I PUT NEW ONE IN AND LIGHTS GO OUT


The fuse is doing it's job. Saving the wiring harness from melting down into it's self and shorting out everthing next to it. No simple soultion. Some one need to get in there and find where the wire is shorted out. DON'T bypass or replace the fuse with some thing bigger. This will cause bigger problems & $$$$$$ down the road

Jan 16, 2013 | 1999 GMC Yukon

1 Answer

I have a 2004 Mitsubishi Endeavor I heard a loud pop above the glove box and the stereo turns on but there is no sound


Hi,
Power amp IC problem.
The loud pop came from the audio power amp in the stereo unit. It was cause by a shorted wire going to the speakers.
Check first the amplifier fuse if it still okay, located at the stereo harness, you have to remove the stereo unit to check on it. If that fuse is still okay, the problem is much worst you have to bring the stereo to any electronic tech shop to have them replace the audio IC( Integrated Circuit ), soldering is needed to replace it.

Hope Fixya helps you out!

Aug 28, 2011 | 2004 Mitsubishi Endeavor

1 Answer

Thought it might be the hubs due to 22 inch rims. Had'em replaced didnt help. Had the brakes replaced in august of 2010. Didnt help and already need to be replaced. In 4 high after a snow a few days ago...


I'd be looking at driveshafts. They cause vibrations, rattles, squeaks and uncountable other symptoms. You didn't really say what was happening in your description. I'd be looking at driveline - driveshafts, hangar bearings and possibly transfer case and front bearings.

Mar 04, 2011 | 1994 GMC Yukon

1 Answer

I have subs in my truck and after listening to it loud but not louder than normal,i looked at my voltage gage and it was way down and my battery light was on, it still starts and runs but the voltz keep...


It sounds like your stereo is drawing more power than your alternator can put out. You can upgrade to a larger alternator. I believe you can still get a 100amp alternator for a GM. The other thing to do would be to put a capacitor into the system. Talk to some stereo guys but I know you can get them on e-bay for decent prices. Hope this helps.

Oct 07, 2010 | 1995 GMC Yukon

1 Answer

My 95 yukon keeps blowing the brake light fuse. I


Yes this is a common problem....the most likely source is you have a bad tailight socket....best advise is to replace both and you should be fine.

Aug 01, 2010 | 1995 GMC Yukon

1 Answer

How to set timing 95 yukon 5.7


There is a connector to disconnect . Yes it should be at "0". The connector is near the blower motor above the front passengers feet area. I think its a single wire connector with a tan wire

May 14, 2010 | 1995 GMC Yukon

1 Answer

I need an audio wiring schematic for 2002 yukon, or lead me to where i can find it. Thanks


2002 GMC Yukon Car Stereo Wiring Guide
Car Radio Battery Constant 12v+ Wire: Orange
Car Radio Accessory Switched 12v+ Wire: Yellow
Car Radio Ground Wire: Black
Car Radio Illumination Wire: Brown
Car Stereo Dimmer Wire: Gray
Car Stereo Antenna Trigger Wire: N/A
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: N/A
Car Audio Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): Tan
Left Front Speaker Negative Wire (-): Gray
Right Front Speaker Positive Wire (+): Light Green
Right Front Speaker Negative Wire (-): Dark Green
Car Audio Rear Speakers Size: N/A
Car Audio Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Brown
Left Rear Speaker Negative Wire (-): Yellow
Right Rear Speaker Positive Wire (+): Dark Blue
Right Rear Speaker Negative Wire (-): Light Blue

rate pls

Feb 26, 2010 | 2002 GMC Yukon XL

Not finding what you are looking for?
1995 GMC Yukon Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...