Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Bank 1 is the same side as cylinder #1 and bank 2 is the same side as cylinder #2. Good luck and hope this helps.
Posted on May 29, 2009
Technically --you dont have a flasher.....The 4 way button on the dash
is a combination turn/ hazard flasher control "MODULE"...
This is a common problem with these switches. I have replaced several of them over the last few months. The switch can be replaced without all of the disassembly that is recommended. I have done it. There is a screw holding the switch into the dash behind the bezels, but it is possible that it can be done without spending hours on it. The Grand Am/Prix cars were all the same, just a slightly different design.
Hope this helps.
Posted on Apr 28, 2010
It's located in the gas tank and to replace it, your going to have to drop the gas tank.
Thank you for using fixya and if you are going to replace the fuel pump your self. Make sure you also replace the wire harness from the frame to the fuel pump.
Posted on Jun 03, 2010
SOURCE: E-Check Light P0125 and
Air/Fuel Sensors are mounted upstream of the catalytic converter. They are located on the exhaust manifold side of the catalytic converter (pre-converter - Sensors 1). Oxygen Sensors are mounted downstream of the catalytic converter (post-converter - Sensors 2). The catalytic converter has two chambers (left and right). Bank1 is left, drivers side. Bank2 is right, passengers side. The Bank2 Sensor1 sensor (Air/Fuel Sensor) is the one located on the 'right and ahead' of the converter. The PowerTrain Control Module (PCM) is reporting that the heater or circuit ( wiring / plug-in) of the sensor is malfunctioning.
Posted on Jan 31, 2011
Tips for a great answer:
Feb 22, 2015 | 2005 Ford Freestar
Feb 10, 2015 | Cars & Trucks
Sep 08, 2014 | 2004 Dodge Stratus
Mar 11, 2011 | 2004 Mitsubishi Endeavor
Jan 31, 2011 | Toyota Camry Cars & Trucks
Aug 03, 2010 | 2001 Saturn L-Series
Mar 31, 2010 | 2003 Chevrolet Avalanche
May 29, 2009 | 2003 Suzuki XL-7
113 people viewed this question
Usually answered in minutes!