Question about Cars & Trucks

Open Question

Tc30 new holland keeps blowing fuses

My tc30 keeps blowing fuses as soon as i turn key on. I dont get a chance to start it just the spot before the start poihnt. It is always the cluster/starter fuse

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 26 Answers

SOURCE: BLOWING FUSES IGNITION FUSE STARTER

check the ignition hot wire and also check your ignition switch, if you can not find the short area, you have to change the whole wire direct to your fuse box to solve this problem.

wire problem is the hardest case for the car, wish you good luck.

Posted on Jun 24, 2008

Ad
  • 5 Answers

SOURCE: Toyota Camry 1994 Main Fuse keeps blowing

CHeck the O2 sensor wiring. If it is shorted to ground it will blow the fuse every time.

Posted on Mar 28, 2009

  • 85 Answers

SOURCE: truck wont start keeps blowing the ecm batt fuse

You have a short (bear wire) somewhere. Trace the wire and find it.
Have a great evening

Posted on May 01, 2009

  • 14036 Answers

SOURCE: my taillights and gauge cluster fuse keeps blowing

bad head light switch or wire shorting to ground.

Posted on May 01, 2009

jasperoni
  • 203 Answers

SOURCE: starter enabler fuse blows which means the starter motor does not work until fuse is changed

It is possible that the starer is pulling too much amperage- 1st thing you need to do is find out what if any other consumers are on that circuit, 2nd you need to find out how much amperage is being consumed by the starter. 3rd test you wires most likely if a wire problem it is the heavy hot wire on the starter or the back of the alternator has a loose retaining nut

Posted on Jun 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Signal fuse keeps blowing


Does the fuse blow on both left and right sides,or just blows randomly or as soon as you put the new fuse in?
Does it have tilt steering?I would check the wiring in the steering column to start.

May 18, 2017 | Cars & Trucks

1 Answer

Keeps blowing auto shut down fuse as soon as key is turned on


Could be several things including one of the oxygen sensors, one of the injectors, the coils, or the engine computer.
You will probably need to get a shop manual to get all of the wiring diagrams connected with that circuit. And I would suggest you use a circuit breaker to check each one instead of fuses.
You'll have to disconnect each component until you find the short.

Oct 18, 2015 | 2004 Chrysler Town and Country

1 Answer

My New Holland TC30 will not move while in gear. It starts and runs just will not move. Any idea why?


check for a lockout lever or switch that requires the operator to be in the drivers seat and the feet on the correct rests.

Feb 12, 2015 | Cars & Trucks

1 Answer

Fuse keeps blowing


Once a fuse blows & you replace it-- ONE Time--
then you stop

You go to wiring diagrams of the circuit with the
blown fuse & start your testing

Aug 11, 2014 | 1994 GMC Sonoma

1 Answer

Ignition fuse switch keeps blowing


you have a short in that circuit chck your harness for wiring that might be exposed to ground or pinched

Apr 13, 2014 | 2006 Kia Sedona

1 Answer

Keep blowing turn b/u fuse as soon I turn on key 1993 gmc sierra


Check out your tail lights, sounds like they are grounding out. Remove the bulbs install a new fuse and install one bulb back on at a time and turn the key if one does not blow the fuse then the socket has worn out.

Oct 09, 2012 | 1993 GMC Sierra K1500

1 Answer

Main fuse keeps blowing. changed battery and installed radio. brand new fully connected postitive termial, vusually checked all wires coming off battery. some sort of radio relay clciks when radio plugged...


Hello! Identify which fuse is blowing...also, does it blow as soon as it is installed or does it blow when you turn the key? Lastly your not referring to a fusible link but a maxi-fuse...ie...40; Correct?

Oct 16, 2011 | 1994 Chevrolet Suburban

1 Answer

Gages dont work, 20 amp fuse under hood keeps blowing. turn key motor turns but dont start


Is it the ecm fuse. Check the o2 sensor wires. On this model sometimes they rub on the rear driveshaft and blow fuses.

Jul 25, 2010 | 1996 Jeep Grand Cherokee

2 Answers

Toyota Camry 1994 Main Fuse keeps blowing


-if your fuses are blowing
-the problem is in the wiring
-because if too much amperage flows through the fuse will blow
-there's probably a short to ground somewhere or high resistance after the fuses causing it to draw more amps

Mar 19, 2009 | 1994 Toyota Camry

1 Answer

BLOWING FUSES IGNITION FUSE STARTER


check the ignition hot wire and also check your ignition switch, if you can not find the short area, you have to change the whole wire direct to your fuse box to solve this problem.

wire problem is the hardest case for the car, wish you good luck.

Jun 12, 2008 | 1996 Chrysler Cirrus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

260 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...