Question about 2005 Buick Terraza

1 Answer

Dvd will not come out of player

My kid put it in don;t know if it's up side down

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 37 Answers

YOU HAVE TO REMOVE COVER, SCREWS AT BACK AND BOTTOM,PRY OFF COVER AND REMOVE,,,YOU MIGHT HAVE TO HOLD OPEN LOADING DOOR ON FRONT ,INSIDE YOU SEE OPENING OVER DISC LIFT UP DISC AND PUSH OUT FRONT DOOR, THEN REASSEMBLE SAME MANNER YOU DID TO OPEN

Posted on Feb 18, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i replace the fuel injectors on a 1995chevy camaro 3.4


Please go here for complete info on the fuel injectors.-- For the 3.4--- ehow.com/how_4509048_replace-fuel-injector-chevy-camaro Good-Day!

Aug 09, 2014 | 1995 Chevrolet Camaro

1 Answer

My 2006 toyota sienna DVD player won't shut off


Engine room Junction Box - on left side of Engine Compartment (Drivers side in USA) - Fuse RAD 1 (20A), Fuse RAD 3 (30A) - there is another fuse that goes to your ECU, it works with the radio, but you won't need to pull it. In case you do - it is Fuse ECU-B (10A)

Oct 14, 2013 | Cars & Trucks

1 Answer

Need to match hardtop lift gate to hardtop don't know brand or year


does it have the side air vents? 1997-2002.... no air vents 2002-2006

Apr 15, 2013 | 2004 Jeep Wrangler

1 Answer

The dvd player in my 2002 dodge caravan ES don't


It could be almost anything: Check to see if there is a fuse related to its power that is blown; or a wire going to it is disconnected, or a DVD is jammed into it, or it is not sensing the DVD you put in...

Jan 10, 2013 | Cars & Trucks

1 Answer

2003 Chrysler Town & Country DVD Player doesn't output picture to screen, audio on right side only.


The cost to repair it will cost you more then to just buy a used one from a auto wrecker.

Oct 19, 2012 | 2003 Chrysler Town & Country

1 Answer

Map sensor location


Don't know what kind of car this is, but if it's got a MAF sensor, or an Air Flow Meter sensor, then there is no map sensor. Only one or the other.
Black smoke, eh? Sounds like you're on the right track.

Nov 30, 2011 | Cars & Trucks

1 Answer

When my son closed the front passenger side door, the window fell down inside the door and we cannot get it back up. Is this the window regulator? Is it something we can fix ourselves?


Window regulator or cable, depending on what you have

You remove the inner door panel to gain access to what
broke

Wether you can fix it, depends on your own skills

Not fun ,but I would never recommend anyone but you
doing it

Not the job repair shops like & in most cases only put
broken parts back on & 4 days later it falls down again

Don't know why they have always done that, rather the just
fixing it the first time

Aug 05, 2011 | 2004 Honda Odyssey

1 Answer

I need to replace the ball joints both upper & lower on both sides, I have a ball joint removal & press. I got both uppers with no problems but can't get the lower ones to budge at all, I tried...


Turn the spindle Knuckle to one side so you can hit it with a big hammer and smack the fat part of it while putting pressure on it. If this doesn't work heat and repeat. I can give you more Ideas but I don't know what your car is.

Jun 18, 2011 | GMC Yukon XL Cars & Trucks

2 Answers

How do i replace the front calipers on my 2001 4runner,done lots of pad and rotor replacement but never any front calipers?thx.


Pretend like you're changing the rotors but don't take the rotors off. Instead, take the hydraulic line off the caliper using a line wrench. Have the new caliper ready and quickly hook the line up and tighten. Put the new caliper back on. The caliper comes with the piston collapsed, so very little bleeding is needed. Crack the bleeder open and see if it will gravity bleed. If nothing comes out, have someone push the pedal down while you loosen and then tighten the bleeder. Have them hold it down until you tighten to avoid drawing air into the caliper on the backstroke. Watch the reservoir carefully as the piston comes out--keep it full so you don't draw air into the lines. Repeat the pushing of the pedal and opening and closing the bleeder until no air comes out. Then continue pumping the pedal until the piston has closed the gap between the pads and rotor. Go to the other side and repeat. Please let me know if you have questions, and thanks for using FixYa.

Apr 27, 2011 | 2000 Toyota 4Runner

Not finding what you are looking for?
2005 Buick Terraza Logo

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...