Question about 1999 Ford Mondeo
Lock not working at all inside or out manually overiding lock doesnt work
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Auto door locking on Ford Mondeo
It sounds like it has been deactivated so we are going to reactivate the auto lock.
The numbers I will be saying will have to do with getting this to work so:
you will need to put the key in to the ignition switch.
1= is back to listen to the radio
2= is to get key out
3= is just before you start
4= is for starting your car
When we do this 1 and 4 will not be used
Do this and we will hope that it works like it should:
1: Turn the ignition with you key up to on( don't start)
2: Press the power door lock control 3 times
3: now turn the key back once (to off position)
4: Press the power door unlock control 3 times
5: ok turn the ignition back up 1 time. (The horn should chirp)
6: Then press the unlock control, then press the lock control, again (horn will chirp 1's) If auto lock
7: Turn the ignition back 1's, Then the horn should chirp once to confirm the procedure was completed.
Posted on Nov 29, 2008
SOURCE: ford mondeo bonnet lock
This is a very common fault on the fords, if i get one in, i generally soak it in WD40 then keep working it back and forward untill the mechanism releases.
If the lock is completely gone then ive had to go as far as breaking the grille off and opening it manually with a scrrewdriver, but this is last resort.
Posted on Feb 04, 2009
Has the door been serviced as in clean and lubricated tranck?A lot of power is not put to the opening or clsin mechanism for safety reasons
Posted on May 27, 2009
check fuse 63 first.
Visual Inspection Chart Mechanical Electrical
It could also be your GEM (generic electronic module) which is expensive as it controls a lot of stuff. A scan tool can be used to cehck for fault codes from the GEM.
Posted on Jun 23, 2009
Tips for a great answer:
Apr 06, 2016 | Audi Cars & Trucks
Mar 22, 2015 | 1999 GMC Suburban
Feb 10, 2015 | 1994 Oldsmobile Cutlass Supreme
Nov 25, 2013 | Honda Accord Cars & Trucks
Mar 25, 2010 | 2004 GMC Envoy
Sep 16, 2009 | 2004 Porsche Cayenne
Jun 02, 2009 | 1996 Audi A4
Mar 03, 2009 | 1999 Land Rover Discovery
Nov 30, 2008 | 2004 Volvo S40
815 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: