Question about 2005 Nissan Murano

1 Answer

05 morano hard to start service engine soon lite on takes a few peddle pumps

Already checked intake hose, service engine soon lite came on and never went off when car stalled took a few peddle pumps and engine cranks to get it started seems to run fine when running

Posted by on

  • Sherio bello Sep 24, 2012

    I had the exact problem with my murano 2006 sl , do not know what is the problem , does any one know how to help? Thanks in advance

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 41 Answers

Does it make any irregular sounds when its running.

Posted on Feb 18, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

6 Answers

Need my car to stay running it starts and then back fires need help with this problem


These are the main causes: faulty plug wires, vacuum hose leak, computer faults, weak fuel pressure. Check the manifold for cracks. God-Bless!

Mar 21, 2015 | 2003 Ford Taurus

6 Answers

2002 ford taurus starts and dies. can start and run at higher rpm by pumping gas pedal.What causes it to die?


Sounds like a fuel filter or the fuel pump inside the tank. Try the fuel filter first as it is the easiest. It is under the driver door area. The fuel pump is located by removing the fuel tank.

O

Oct 13, 2014 | 2002 Ford Taurus

1 Answer

My 1988 dodge Dakota 3.9 3 speed automatic 2 w Dr.idles rough and sometimes dies at a stop light and won't restart unless I put the gassed peddle to the floor.when it does finally start I have to keep...


Replace your hose going from intake to brake booster ( vacuum leak) check all other hoses also. Clean the throttle body. And a tune up probably wont hurt either.

Jun 09, 2017 | Cars & Trucks

1 Answer

Brake peddle gone hard after replacing engine


check vacuum hose from engine intake manifold to booster behind brake master cylinder. Check for leak or cracks in hose. If brittle, replace hose.

Sep 05, 2010 | Volkswagen Microbus Cars & Trucks

1 Answer

Starting car is problem. it will start after maybe two trys. i have tried engine cleaner, but still it is slow starting,. battery is good, thats been checked.


When you have an engine that is hard to start or the engine takes longer than normal to start, with a fuel injected engine it will normally be caused by a fuel problem. Another problem would be slow cranking of the engine because of a low battery, I would check all of the fuel related problems if the engine seems to crank normally. There are a few things to check. First pull the fuel filter off and wipe it off so you don't get gas in your mouth and try to blow through one of the fuel connections on the filter. If you can't blow through it the filter is pluged and needs to be replaced. A plugged fuel filter can cause hard starting and can also damage your fuel pump. The next thing to do when everything is put back on the car is to check the fuel system for bleed down. You need to locate the fuel pressure test connection on the engine. Connect a fuel pressure gauge to the connection and start the engine, then turn the ignition off. With the engine off the pressure should read and stay between 30psi and 40psi, to be sure of the pressure you will have get the spec's on the engine you have. The main thing you will be looking for is to make sure the pressure doesn't start bleeding down in to direction of zero after a few minutes or maybe even immediately. If you see the pressure start to bleed down you have a problem. There are two problems that normally cause the pressure to bleed down. One is a bad check valve in the fuel pump, the other is a bad fuel pressure regulator. The main thing that happens with a fuel pressure regulator is the diaphram inside starts leaking. When that happens sometimes it will leak fuel into the intake manifold through the vaccuum hose connection to the intake manifold. To check for a fuel leak through the vacuum hose connection, locate the vacuum hose on the fuel pressure regulator and pull the hose from either the manifold connection or from the connection at the fuel reguator. If you see any gas at all the fuel regulator is leaking and must be replaced. If it is a slow leak from the regulator you might have to start the engine with the vacuum hose disconnected and look for a leak from the hose. If you don't find anything wrong with the regulator the next problem area would be fuel pressure bleeding back into the gas tank because of a bad check valve in the fuel pump. If this is the problem the fuel pump would have to be replaced. My first guess as to what is causing your problem would be the fuel pressure regualtor although I would definately want to make sure the fuel filter is not plugged. (Please Note) The fuel pressure regulator is located in the intake manifold area of the engine. The fuel pump is located in the gas tank. The fuel filter is located usually somewhere under the car.

Aug 24, 2010 | 2001 Pontiac Grand Am SE

1 Answer

When push brakes you have to push really hard to make them go in then the truck barely stops. Replaced the MC and bled the brakes now every time push brakes truck acts like its going to die. Brake light...


Sounds like you will have to bleed your brakes again, but thats not the problem og hard brake peddle, need to check your power brake booster, sit right in back of master cylinder, check make sure it has vacum going to it, also to test it with engine off, press on brake peddle three time, then state engine with foot on peddle, peddle should go down a few inches, also with engine of peddle should feel soft for three pumps, if you have none of this , power brake booster is bad.

Jul 04, 2010 | 1995 Toyota 4Runner

1 Answer

Check engine code is telling me I have a bad EGR Valve(code 32)... Where is this located on the engine of the 3.3... and on a scale of 1-10(ten being hardest) how hard do you feel it is to replace. I have...


located on the backside of the engine passenger side. first try flushing out your intake with seafoam. disconnect the tubes off the intake that goes into the egr and allow the seafoam to set for about 10 min. take off neg cable about 10 min. to reset ecm thin start and drive to see if code come up again. on scale 1-10 removal is about 10 if you have to drop the engine

May 10, 2010 | 1997 Dodge Intrepid

1 Answer

Engine vacuum system on a 1976 Mercedes Benz 450 SLC. Transmission behaves erratically/jumpy when cold + cold engine idle takes at least a minute to work after starting, I can't take foot off gas peddle...


hi check cold start valve --plugs and ht.leads- air intake gaskets-all relevant intake hoses--air filter and icu.found on the passenger innerwing beteen coil and headlight good luck alf the 107 specialist

Apr 21, 2010 | 1990 Mercedes-Benz Mercedes Benz Sl Class

1 Answer

WARNING LIGHT CHECK ENGINE COMES ON ABOUT 5000 REVS LIFT OFF


your question before about fuel starvation may be correct. diesels have a habit of clogging fuel filters and spark plugs, they get overgapped. Try these items, if changed already, try looking up the engine light code, autozone does this for free, this will definetly lead you to the problem.

Mar 18, 2009 | 2003 Kia Sedona

1 Answer

Wont stay running


THIS SOUNDS LIKE A INTAKE MANIFOLD VACUUM LEAK. TO CHECK THIS GET A CAN OF CAR SPRAY AND SRAY AROUND THE INTAKE GASKET WHILE THE ENGINE IS RUNNING, IF THE ENGINE HAS A LEAK IT WILL START RUNNING OK WHILE THE YOU ARE SPRAYING.

Nov 07, 2008 | 1986 Chevrolet Nova

Not finding what you are looking for?
2005 Nissan Murano Logo

462 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...