Question about Cars & Trucks

1 Answer

Here can i locate the heat in a 87 voyger

When they put a new belt on the heat stopped working

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 2,122 Answers

Hi Kutis, Could you give us more information? I believe your referring to the cabin climate heat control. What belt did 'they' change? if was the belt for the AC? If it was I believe you may have the Air Conditioning running on cooling instead of heating? Look at the dash climate controls and you will see one for the AC control. If it is illuminated press the button to disengage it and the heat should work. If it was a different belt we need to know which one was replaced? We also need to know what else was done? Regards John

Posted on Feb 18, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My mazda protege keeps breaking alternator belts. I've put on serval alternator belts, a new water pump pulley, and 3 alternators and my is still breaking belts


Replace belt tensioner, any other pullys, I worked on ? vehicle where the pully would spin but would stop every so often.

Dec 31, 2015 | 2000 Mazda Protege

1 Answer

Where is the turn signal flasher located in an 87 El Camino?


Under the dash on the left side of the steering wheel. You'll see the fuse panel. There is a flasher on the front side that you'll see and one one the backside. They are both the same. On is for the turn signal, one for the flasher.

Oct 13, 2014 | 1987 Chevrolet El Camino

1 Answer

This is a renault car grand voyger and the power steering is not working what could be the problem


check belt//fluid level / some have electric motor assist..look at fuses..

Dec 26, 2013 | 2000 Jaguar S-Type

1 Answer

1999 plymoth voyger diagram for serpentine belt


You forgot to list the size of the engine in this 1999 Plymouth voyager.
This van came with a few types of engines. for example this van may have a 2.4, 3.0, 3.3 or a 3.8 engine.

I will try to enclose all these engines with the belt route diagrams. hope this is helpful. i will label the engine size for each diagram to help you locate your engine. the diagram for the 3.3 and 3.8 are the same diagram. GOOD DAY.3_11_2012_10_53_51_pm.gif3_11_2012_10_53_59_pm.gif3_11_2012_10_54_08_pm.gif

Mar 11, 2012 | Cars & Trucks

1 Answer

1991 plymouth voyger where is the belt tension? It has 3 belts. How can i get it loosen belts?


Sorry, each belt on this model has an individual adjustment bracket...Good news if you have the owners manual...The manual shows the location of each adjustment setting needed to remove, or replace each of the 3 belts...newer models have a single serpentine belt with a tensioner pulley for quick release or replacement...:)

Dec 10, 2010 | Plymouth Voyager Cars & Trucks

1 Answer

1999 plymuth voyger stoped runing While driving .


check ALL fuses
check fuel in tank. chryslers are famous for running out of gas when gauge reads 1/4 to 3/8 of a tank.
there is no timing to check on a 99 voyager so i will assume the timing belt was checked and that would only applie to 2.4l 4 cyl. or 3.0l V6.

May 08, 2010 | 1999 Plymouth Voyager

1 Answer

Grand voyger wont start in the heat


Have fuel pressure tested when it happens if you can, or take it to shop, let it run on a hot day, then check it. May be a fuel pump on it's way out.

Jun 04, 2009 | 2000 Chrysler Grand Voyager

1 Answer

I pull the plug on the alt.it stops making noise when i plug it in it starts making noise again 87 olds cut.307 new belts new alt.


IF YOU HAD NEW BELTS AND NEW STARTER PUT IN THEN YOU HAVE A BELT TENSION PROBLEM.THIS COULD TWO THINGS ONE YOU NEED TO ADJUST THE ALT BECAUSE YOU HAVE TOO MUCH TENSION AND THE OTHER COULD BE YOU HAVE A BAD ALT PULLEY BEARING.YOU COULD TAKE THE ALT TO AN ELECTRICAL SHOP AND HAVE THEM CHANGE THE BEARING FOR A FEW BUCKS.E-MAIL ME IF THIS HELPS.MY E-MAIL IS KPHULESAR@COMCAST.NET.

Mar 18, 2009 | 1993 Toyota Corolla

1 Answer

Odometer stop working


Seriously take a rubber mallet to the top of the instrument panel.. Works everytime for me.

Oct 28, 2008 | 1999 Plymouth Grand Voyager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...