Question about 2009 Ford Fusion

Open Question

Flat tire on my 2010 ford fusion, service power steering and advanced tracking light came on, turned car off when i turned it back on i had no power steering

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Ford Fusion 04 Engine Management Light

I had a 2002 model 1.4 Fiesta, same problem Engine management light or ECA, electronic accelaration Control (EAC), it needs a ford dealer to do a computer diagnostic, most likely that it will need replaced.

Mt friend who is a mechanic for ford said that it was a common factory fault and is very common in 1.4 zetec /duratec petrol models.

I now have a 2007 Fusion and was quick to see if this problem had been sorted on this model, and it has!!

Hope this helps!!

Posted on Dec 16, 2008

  • 7 Answers

SOURCE: brand new 2010 ford fusion day bought wrench light

Tell the dealer to scan it. We have tons of people come in everyday that just want to know what the light is on for.

Posted on Dec 30, 2009

ZJLimited
  • 17970 Answers

SOURCE: Locating the fuse panel in 2010 Ford Fusion

I suggest check your Fusion Owners Manual, page for this and other details.

Passenger compartment fuse panel
The fuse panel is located below and to the left of the steering wheel by
the brake pedal. Remove the panel cover to access the fuses.
To remove a fuse use the fuse puller tool provided on the fuse panel
cover.

Power distribution box
The power distribution box is located in the engine compartment. The
power distribution box contains high-current fuses that protect your
vehicle’s main electrical systems from overloads.

Hope helps (remember rated this).

Posted on Jun 14, 2010

dttech
  • 4803 Answers

SOURCE: 2010 Ford Fusion - After changing the oil, how do

You use the "Setup" and "Reset" buttons in the Information Center. The sequence of button-pushing is different for Hybrid and Non-Hybrid vehicles. The sequence for your car should be outlined in your Owner's Manual.

Posted on Dec 07, 2010

  • 65 Answers

SOURCE: 2010 Ford Fusion fuse panel. There is a power

Do you have your owners manual, it will tell you wheres it at and how to access it.

Posted on Jan 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2010 ford fusion hyprid power steering went out


Power Steering - Hybrid The electric power assist steering system consists of:
  • power steering control module
  • electric motor
  • torque sensor
  • rack-and-pinion steering gear
The electric power steering system provides power steering assist to the driver by replacing the conventional hydraulic valve system with an electric motor coupled to the steering gear. The motor is controlled by an electronic control unit that senses the steering effort through the use of a torque sensor mounted between the steering column shaft and the steering gear. Steering assist is provided in proportion to the steering input effort and vehicle speed.

your best bet would be to have the ford dealer check it out !

Dec 02, 2016 | 2010 Ford Fusion Hybrid

1 Answer

Where do power steering fluid go in a 2010 Ford Fusion 3.0 liter


The power steering reservoir is located on the left side of the
engine compartment....the cap should read STEERING FLUID
ONLY....look for the minimum and maximum levels shown on
the reservoir.

Regards,
Dennis

Sep 20, 2014 | Ford Fusion Cars & Trucks

1 Answer

Service advance trac light on & car won't start


Try disconnecting the negative cable for three minutes ! Or try you tube !

Mar 24, 2014 | 2010 Ford Fusion Hybrid

1 Answer

2010 ford fusion oil lightstill on after oil change ,how do rest it?


Do you mean the yellow oil maintenance light ? There are videos on youtube and info in your owners manual. You use the buttons on the steering wheel to access the info section of the odometer.

Jan 22, 2014 | 2006 Ford Fusion

1 Answer

2010 Ford Fusion has intermiitant clicking sound near the left side of the dashboard/steering window. Sound occurs when engine is on, while driving or in park. Sounds like electrical wires arcing??


could be the plastic parts on dash rubbing or the plastic exterior pieces close to the window rubbing, if it was electrical you would know by either a dash light coming on or electrical issues

Sep 26, 2013 | 2010 Ford Fusion 2.5

1 Answer

2010 ford fusion vibration at idle and acceleration.


Chances are its a minor miss in one of the cylinders. You don't feel it neutral at idle or until the trans goes into overdrive because those times the engine is not working very hard.
If it is a miss fire the check engine light will come on when it gets bad enough to affect fuel mileage.
If you have not yet changed the plugs I would start with that. There is also a chance you damaged the engine when it overheated.

Dec 09, 2012 | Ford Fusion Cars & Trucks

1 Answer

2010 fusion tail lights won't turn off


I suggest check brake switch, underdash, top back side brake pedal or some short/ground there.

Apr 23, 2012 | 2010 Ford Fusion 3.5

1 Answer

Power steering assist fault light stays illuminated on a 2012 ford fusion


This had been an intermittent problem on my 2012 Fusion, but the other day it became permanent. I have since discovered that the Fusion has electronic power steering, that this problem is caused by a bad module, and that the fix involves replacing the entire rack and pinion system.

Mar 20, 2012 | 2012 Ford Fusion S Sedan 2.5L 4-cyl....

1 Answer

What is Fords recommended service for a 2009 fusion at 25000 km? The dealers seam to be adding all kinds of extras.


1. Check brakes
2. Inspect axle shaft seals,Constant Velocity Joint Boot, Transmission
3. Lubricate Chassis,linkage,steering, suspension
4. Replace Engine oil & filter
5. Rotate Tires

Feb 10, 2010 | 2009 Ford Fusion

Not finding what you are looking for?
2009 Ford Fusion Logo

Related Topics:

254 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...