Question about 2007 Dodge Grand Caravan SXT Minivan

1 Answer

Fuse on signal lights keep blowing - 2007 Dodge Grand Caravan SXT Minivan

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Dodge Master
  • 76,109 Answers

Check all the wiring for the turn signals starting at the steering column and working out to the front and rear signals.

Posted on Feb 18, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Ford Ranger 10 amp fuse keeps blowing no brake lights,abs, turn signals?


Fuses blow because there is an overload on the system. If the fuse blows when you step on the brakes then there may be a short in the wiring from the brake light switch to the lights, abs module or turn signal switch. If the fuse blows when you turn the key on then there is likely a short in the wiring to the brake light switch. Basically you will need a wiring schematic to check the wires at the switch and at each of the loads. Also verify that the fuse is supposed to be a 10 amp fuse. Hope this helps

Mar 27, 2017 | Ford Cars & Trucks

1 Answer

Why does my turn signal/ hazard light fuse keep blowing out


you have a short in one of the light sockets or a worn wire from the wiring harness. could be the flasher assembly. are the turn signals different bulbs from the brake lights? Does using the brakes blow the fuse? (Rear lights or brake light switch on brake pedal). left or right turn signal blowing the fuse will tell which side has the short. 4 ways only, replace the relay.

May 21, 2015 | 2004 Jeep Grand Cherokee

1 Answer

Brack lights wont light up on my 1988 ford ranger we keep blowing fuse and put in new brake switch


If you keep blowing the brake fuse than you have a short in the system. Unplug the brake switch. Install a new fuse. If it did not blow than the problem is after the brake switch. Next unplug the turn signal switch, then plug the stop light switch back in and press the brake pedal. Did the fuse blow. If not than the wiring is good in between the two switches. With the turn signal switch disconnected use a jumper wire in between the light green wire (power from the brake switch) and the orange with light blue wire (power to the right brake lamp). If the fuse blows than there is a short in the right side brake circuit between the plug in and the rear socket assembly. If the fuse does not blow than jump from the light green wire to the Light green with orange wire (power to the left brake lamp). If the fuse blows than the problem is in the left hand brake wiring circuit.

Sep 04, 2013 | Cars & Trucks

1 Answer

Turn signals on a 1995 lesabre keeps blowing fuses when I turn key on. I have lights everywhere else. need answers PLEASE


Have you unplugged the turn signal switch to see if the short is inside the switch or harness ?

May 11, 2013 | Cars & Trucks

1 Answer

Fuse keeps blowing out


The parking lights, dash lights, turn signals, and hazard flasher should be 4 different circuits.
So you would need to know exactly what that fuse protects, then look for the short to ground.

Feb 27, 2013 | 1999 Dodge Durango

1 Answer

My 2005 buick rendezvous keeps blowing the fuse for the turn signals and brake lights. Fuse #42 in the inside fuse panel. this just started happening two days ago. Nothing is different with the car.


most likely caused by a short, could be any were. start with the light assembleys remove it and clean any rusty or coroded spotspull all bulbs clean and or replace .auto parts stores sell an electrical parts wash about 9 to 14 $ . spray as needed let dry and put back together.if it still blows fuses its some ware in the wire s , could also be at the turn signal switch or the brake switch . you would have to get it to blow to figure out witch one it is and witch one it is not example put in new fuse then keep putting on the brakes if not blown then keep doin the turn signal then check to see if blown

Jul 26, 2010 | Buick Rendezvous Cars & Trucks

1 Answer

2006 f150 keeps blowing turn signal fuse


It sounds like the fuse is doing what it is supposed to do, and burning out when there is a short circuit. Check the wiring from the fuse block back to the lights and pay special attention to the trailer connection.

Oct 09, 2009 | 2006 Ford F-150

1 Answer

The 7.5A fuse to the turn signal\backup light keeps blowing.


The only way to resolve this problem is to use a meter to find out if the problem is an over-current fault or a short-circuit fault. WHatever the case may be, the wiring and lamp assembly will have to be inspected for damage

Sep 20, 2009 | 1988 Acura Legend

Not finding what you are looking for?
2007 Dodge Grand Caravan SXT Minivan Logo

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...