Question about 2005 Nissan King Cab

Open Question

Nissan 77 injection timing f/b - 2005 Nissan King Cab

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why do I have to pump the gas pedal to get my 1991 Nissan stanza to start


You probably have a carburetor that feeds fuel to the engine rater than Fuel Injection. Fuel Injection squirts a bit of fuel into the ignition chamber when you turn your key, allowing the car to start, with a carburetor, you have to manually pump the fuel into the ignition chamber to start the engine. Usually Two to Three times should be enough.

Jan 22, 2013 | Nissan Stanza Cars & Trucks

1 Answer

Engine warning light comes on and engine goes limp. Missfires and comes back to life. Registered fault code is 77p7-f/inj timing fdbk. Thinking its the timing solonoid. Any ideas


on nissan terrano diesel: had a fault cose 77 and a white smoke, no power. i changed the fuel filter and cleaned the fuel line from the tank to the fuel filter. it solve the problem.

Dec 07, 2011 | Nissan Cars & Trucks

1 Answer

1996 nissan navara diesel startred running rough and smokeing and can only rev to about 2 000 rpm


IF ENGINE SMOKING WHITE INCORRECT INJECTION TIMING TIMING RETARDED FUEL FULL OF AIR BUBBLES. IF YOU SEE BLACK SMOKE TIMING IS ADVANCED. IF YOU SEE LOT OF HEAVY BLUE SMOKE LOW COMPRESSION ENGINE BURNING OIL.

Jul 26, 2011 | Nissan Pickup Cars & Trucks

1 Answer

I fixed used injection pump to engine and is not starting,i check oniy to fine out that the pump is not injecting fuel to the injectors.the timing is good.it is nissan navara 2000 model


1) There could be an air lock to the fuel system, try to bleed the system.
2) If the fuel is reaching the injector pump & not supplying to the injectors nozzles thn the pump needs attention.
Hope this helps!

Aug 18, 2010 | 1997 Nissan Pickup

1 Answer

Engine in my nissan car is cd17 diesal is under repair process. on tappit cover the slip shows 4.2-4.8 japani words.(un-understandable by us.) so tell us the tappit clearance ofinlet and exhaust volve. we...


if you are not sure about anything then invest in a manual ,as for ignition timing of the pump then if engine is in- direct injection then it will be between 6/8 degrees btdc

May 15, 2010 | 2000 Nissan Altima

1 Answer

Fuel line rusted out on my 1988 nissan pathfinder. Can I replace with a flex line? Also need line diameter.... thanks.. 6 cyl.


The line diameter should be 3/8 fuel feed line, and 5/16 fuel return line if the vehicle is fuel injected you must use fuel injection hose and fuel injection clamps. if its got carb. them you dont have to use fuel injection line.

Mar 23, 2010 | 1988 Nissan Pathfinder

1 Answer

Flash codes 34 37 53 77 81 91 what do they all mean. tks.


34 & 37

Knock Sensor

53

O2S

77

Rear HO2S Circuit
91
P0135
Front HO2S Heater Circuit RH Bank
81 does not show as a valid code

Aug 30, 2009 | Nissan Maxima Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

225 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...