Question about 1999 GMC Sonoma

2 Answers

3rd door wont open - 1999 GMC Sonoma

Posted by on

  • CoolHandLuke Feb 18, 2012

    Handle was Broke when i bought it. so, i bought a new handle. just cant put it on.. Has 2-rods , 1- pushes Up& unlatches top of door- it works ok... The other rod pushes downward to unlatch bottom of the door--- this one is the problem. It will push down but, somewhere downthere i think it has poped loose or something . The botom of the door will not unlatch...

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

I have tried to do this and it is stuck or something.i worked 2 hours and to no avail

Posted on Oct 03, 2013

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 444 Answers

Sounds like the linkage inside the door has come loose. you can get a tool for removing the door panel (its a funny looking screwdriver/pry tool) and remove and trim screws to check and it should only take you about 10-15 minutes. the latch or lever could also be jammed. either way its an easy fix. hope this helps

Posted on Feb 18, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Panic alarm does not work. Locksmith verified that it is not the remote fobs.


central timer module" - Dodge Dakota Forum

www.dodgedakota.net/boards/gen/21983.html

Jan 2, 2009 - 21 posts - ‎18 authors
I have a Dak 2000 3.9 Ltr V6, Single Cab, Bare Bones. ... Panic Mode .... ooops....i mean the remote entry and alarm system does NOT work ... i have a 2002 dakata where can i buy a ctm looked all over nobody sell them can thay be rebuilt ... I was out the door $550.00, and they washed the truck also.

Truck wont work/Key Fob won't work/wont start/wont do anything ...

www.ramforumz.com > ... > Electrical

Apr 10, 2010 - 10 posts
Truck wont work/Key Fob won't work/wont start/wont do anything! ... Maintenance & Repair > 3RD Generation Dodge Ram - 2002 to 2008 Dodge Ram Trucks > Electrical... Soon as I manually unlock the door, and open it.... the factory panic alarm starts going off. .... Vehicle: 2004 Dakota Club Cab 4X4.

alarm going off when opening the door.. embarrassing and annoying ...

www.cumminsforum.com > ... > 3rd Gen. Non-Powertrain

Jan 12, 2012 - 11 posts - ‎9 authors
how do I stop my trucks alarm from going off when I open the door? it did it ... to thetruck and opened driver door (it was unlocked) and the alarm started going off. ... I do not have a remote unlocking device (or it doesnt work) so I do all .... alarm will go off then I have to use the FOB panic button to shut it off.

Keyless entry/panic button/alarm - Dakota Durango Forum

www.dakota-durango.com > ... > Gen III Dakotas

Jan 10, 2016 | 2002 Dodge Dakota Club Cab

Tip

2010 BMW 528XI Garage Door Opener Homelink Setup


**** >>> This setup I performed with my new 2010 BMW 528XI Garage Door Homelink and Chamberlain Garage Door Opener <<< ****

Chamberlain:
01. Power off or unplug the garage door opener motor power supply (which is mounted on ceiling of the garage) ;;;

02. keep the garage door opener transmitter in your hand (do not press any button at this time) ;;;

03. In your 2010 BMW 528XI Homelink button (which resides under rear view mirror) press the 1st and 3rd homelink button together for about 30-40 seconds (i.e., until the yellow light blinks fast) and when the yellow light next to the homelink button blinks fast release from pressing the (homelink) buttons ;;;

04. now hold the garage door opener transmitter closer (means within 2-4 inches) to the homelink button (either 1st or 2nd or 3rd) whichever you are planning to program to open the garage door ;;;

05. now press the garage door opener transmitter button and chosen homelink button (either 1st or 2nd or 3rd whatever you need) together ;;;

06. the yellow light (next to homelink button) initially may blink slowly but after few seconds (may be 10-20 seconds) will blink fast; once it started blinking fast release from pressing both garage door opener transmitter and homelink button ;;;

07. Now plug or power on the main garage door opener motor (which is mounted on garage ceiling) ;;;

08. On the main garage door opener motor (which is mounted on garage ceiling) press the "LEARN" button (once you press it may have yellow/orange color light; make sure the light is on) ; then within 30 seconds do the next steps #9, #10, #11 very carefully ;;;

09. go to your car and press the homelink button you programmed and hold it for 4 seconds and then release it --> 1st iteration ;;;

10. again hold the same homelink button you programmed and hold it for 4 seconds and then release it --> 2nd iteration ;;;

11. again hold the same homelink button you programmed and hold it for 4 seconds and then release it --> 3rd iteration ** important note; generally three iterations are not necessary; and steps #9, #10, #11 must be performed within 30 seconds ** ;;;

12. during one of the iteration you will hear "CLICK" sound one-time from Garage door motor (which is mounted on ceiling) and if you have light attached with it; it will blink once (** if you hear the CLICK sound and/or light blinks once**) then the particular homelink button is programmed ;;;

13. now press the programmed homelink button; the garage door will open or close (but always it will take 3 or 4 blinks in yellow light or 2-3 seconds before the garage door opens or closes and which is normal) ;;;

** Thats it, your 2010 BMW 528XI Garage Door Opener Homelink setup is complete ** ;;;

You can program rest of the homelink button the same way but following from the steps between #4 and #13 ;;;

Hope this steps will help you to program chamberlain Garage door opener in 2010 BMW 528XI Homelink. ;;;


** possibly the above same steps may work with other BMW 5-series cars homelink too (but I'm not sure) **

on May 29, 2010 | BMW 528 Cars & Trucks

1 Answer

Latch at bottom of 3rd door will not open


Pull the Door Handle on the INSIDE of the REAR DOOR, Pull HARD... THEN PUSH IN on the door and then pull back. Mine releases with a Bump of my hip. This is a common issue with these trucks. If you can not get it loose that way, then use a flat screwdriver once you pull the handle to get it to release. You can adjust it to make it work normally,,, I am just too lazy to do mine

1997 Silverado

Apr 12, 2013 | 1999 Chevrolet Silverado 1500

1 Answer

3rd door top latch want open. what needs to be


sounds like it just come unhooked from the handle, take the handle loose, you should be able to see where it connects to it.

Nov 29, 2010 | 1997 Ford F150 Regular Cab

1 Answer

3rd door on ford f150 will not open


There was something in the paper, maybe a recall on the latch for the 3rd door. There is a clip inside the door that keeps the lockrod in place. You might want to call the dealer about it. I am not sure you can remove the inside panel without having the door open.

May 31, 2009 | 1997 Ford F150 Regular Cab

1 Answer

Doors will not lock


replace the actuator. wouldnt recommend doing this yourself as it requires you to tear apart the door. the dealership will do it for around 150

May 28, 2009 | 2002 Acura RSX

1 Answer

3rd door latch broken or disconnected. will not open.


Take the handle off the third door with the two screws and look up in there with a light and see if the arms are off or just whats going on.. Holler if you need more. Jerry

May 12, 2009 | 1998 Chevrolet C1500

2 Answers

Trunk door wont open


somewhere in the truck is a trunk release button on the drivers door , in the center console or in glovebox

Dec 10, 2008 | 2005 Cadillac Escalade

Not finding what you are looking for?
1999 GMC Sonoma Logo

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...