Question about 2002 Nissan Maxima

1 Answer

The car steming is high which causes over heating

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 5,370 Answers

For car running hot and overheating issues, I suggest to you go through this help links. Click this link below and go through the troubleshooting procedure to take care of the problems: ----Car runs hot? http://howtobyme.blogspot.com/2011/11/car-runs-hot-in-traffic.html
-----------All types of car overheating problems and troubleshooting?

http://technoanswers.blogspot.com/2011/11/all-types-of-car-overheating-problems.html
Car freeze overnight and started overheating while driving?http://technoanswers.blogspot.com/2012/01/car-freeze-overnight-and-started.html-----------Engine Overheats and heater blowing cold?

http://howtobyme.blogspot.com/2011/11/engine-overheats-and-heater-blowing.html

---------------------------

Car overheats and Air blows hot at idle?
http://howtobyme.blogspot.com/2011/11/car-overheats-and-air-blows-hot-at-idle.html
--------overheating? http://schematicsdiagram.blogspot.com/2011/12/buick-century-overheating.html
----------Car engine Overheats and transmission starts slipping?http://schematicsdiagram.blogspot.com/2011/12/car-engine-overheats-and-transmission.html
----------This details will help.Thanks.

Posted on Feb 18, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The fan on my senville aura 12000 doesn't blow high on heat what Is causing it to not blow on high


Your control switch is most likely the cause here. The one right on the dash that you are turning to adjust the fan.

Feb 05, 2016 | Cars & Trucks

1 Answer

Have a 2004 Murcury Sable. Whenever I turn on the heat the car starts surging high and low then shuts off. Doesn't overheat but idles poorly??? Only when turning on heat or air.


Problem With Idle Air Bypass Valve May Cause Engine ...

repairpal.com > Problems > Mercury > Sable
If you experience difficulty starting the engine when cold, stalling at idle, ... Also, this summer electric locks stopped working and recently car seems to idle high whensitting or when I put heat on. ... I was either braking and barely moving in traffic andwhen I would also turn on the ... 2004 Mercury Sable- 3.0L V699,000Visitor.

03 MERCURY SABLE ROUGH IDLE CAUSE - YouTube



Nov 19, 2015 | Cars & Trucks

1 Answer

1996 Sierra ext cab pickup. What causes the ignition coil to melt?


Too much current will cause the wiring and coil to melt. Need to find out why the current is so high so as to cause this.
If voltage is too high that will cause the hassle

Amperage = voltage/resistance. If voltage is higher and resistance stays level the current flow thru circuit goes up. Causes heat buildup and eventual meltdown in bad case.

Aug 06, 2015 | GMC Cars & Trucks

2 Answers

Its not a P0300 it's P0032 and P0038


code p0032refers to heated oxygen sensor(HO2S) 1 bank 1-heater control--circuit high===causes --wiring short to positive--HO2S sensor--ECM
code p0038 refers to heated oxygen sensor(HO2S) 2 bank1 heater control --circuit high===causes --wiring shorted to positive --HO2S---ECM
It is most important that when installing /removing the sensor that the correct tool is used to prevent damage to the wiring for the sensors. Severely twisting the wires during installation/ removal will result in the causes for failure listed.

May 27, 2014 | Chrysler PT Cruiser Cars & Trucks

1 Answer

2005 aveo code po132


There is not cut and dry solution for this code, here are the possibility's
P0132 - O2 Sensor Circuit High Voltage Bank 1 Sensor 1 Symptoms - Engine Light ON (or Service Engine Soon Warning Light)
- High Fuel Consumption
- Excessive Smoke from Exhaust Possible causes - Front Heated Oxygen Sensor Bank 1 harness is open or shorted
- Front Heated Oxygen Sensor Bank 1 circuit poor electrical connection
- Faulty Front Heated Oxygen Sensor Bank 1
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks

Feb 14, 2012 | Chevrolet Aveo Cars & Trucks

1 Answer

How do i know if the fuel pump is bad systoms?


if the fuel pump is not working the engine will not start.

one way to check is to remove fuel line from engine and place it in a container and when somebody else switches the ignition on fuel should pump out (eletric pump) or once the engine is being turned over on the starter (machanical pump).

if the fuel is not steming well this would indicates a blockage or pump fault.

be careful fuel is flamable.

I hope this was useful.

Jan 11, 2011 | 1998 Ford Contour

1 Answer

My air condition does not work at all and the heat only works on high what could that be?


Two separate issues...but the heat only working on high is caused by a bad blower motor resistor.

Feb 12, 2010 | 1999 Acura 3.5RL

1 Answer

P1487 manufacturer control auxillery emission controls


High Speed Fan Control Relay Circuit ,try this.In a nutshell, wiring problems come down to only a few possible causes, and they are:
1. Open circuit (or partially open such as a chaffed line which causes high resistance due to heat when circuit load is on)
2. Short to power
3. Short to ground
4. High resistance (usually caused by corrosion or poor connections)

Oct 07, 2009 | 1998 Mitsubishi Eclipse

1 Answer

Car heat blower is not blowing heat/air into the care


it's either a fuse or it's a bad blower motor, it could be a bad blower motor resistor but usually you'll get either high or low only, so if you have nothing on any speed, high low etc, and all the fuses are ok chances are it's your blower motor.

Jan 16, 2009 | 1999 Audi A4

1 Answer

High temp


nine chances out of ten she is airlocked that will cause ur temp to peak and actually not be hot it will also cause your heat problem.

Jan 07, 2009 | 1993 Pontiac Sunbird

Not finding what you are looking for?
2002 Nissan Maxima Logo

710 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...