Question about 2001 Ford Mustang
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If I understand you right based on your post/description, the signal lights would still turn on even if any or both of the flasher relays are removed. Should this be the case, then the signal lights are not getting the power from the flasher relays but from the brake light circuit.
Perhaps your concern is not with any of the flasher, but simply missing or loose ground more particularly with the rear lights. Perhaps you could try determining which of the wires for the brake lights and signal lights (as they come out of the light assembly) would be ground . A test and even possibly a temporary workaround is to hard wire a second ground connection from the determined ground wire of the lights and attach it to any conveniently located bolt or screw to the body. it may be to your advantage to do this on all the rear lights assembly.
Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.
Good luck and kind regards. Thank you for using FixYa.
Posted on Aug 05, 2008
SOURCE: 96 ford tarus turn signal
The turn signals and the emergency flasher are controled by a single electronic flasher unit. It looks like an electronic relay and is located on the far left underside of the dash. It is on a mounting bracket and has a three wire connector. If you do not hear this clicking when you use the turn signals or the emergency flasher it may be bad. Just remove the connector and remove the one screw holding the flasher to the bracket. Be sure the replacement is identical to the old one and compare them before installing the new one.
You may want to also check the turn signal bulbs also. Other causes would be bad signal and flasher switches, bad bulb connectors, and opens or shorts in the wiring.
Posted on Nov 20, 2008
The flasher is a small round plastic cylinder (unless replaced with a metal one) behind the left edge of the glove box that will look similar to the one in the fuse panel. The first step is to squeeze gently both sides of the open glove box and let it swing downward. It will be snapped into a metal horizontal brace just to the left of the glovebox opening by a small tab and have two wires attached. The number more than likely will be a #552 although I have seen a factory one with a Warner #224
Posted on May 13, 2009
I Have A 92 Thunderbird To And Its Located Above The Fuse Panel You Will Probally Need To Remove The Panel Under The Steering Column To Get To It Its Located To The Right of The Steering Column It looks Like A Relay Not The Normal Looking Round Style Flasher
Posted on Jul 16, 2009
it's in the auxiliary relay box behind the glove box.
13350 is base part number on flasher
Posted on Feb 03, 2010
Testimonial: "Actually found it located behind the radio mounted on a brace. Removed cover and relay pulls out. About 1" cube with 5 terminals on it."
Tips for a great answer:
Feb 08, 2016 | Cars & Trucks
Jul 30, 2011 | 1995 Ford Mustang
Apr 22, 2011 | Ford Mustang Cars & Trucks
Aug 10, 2010 | Ford Mustang Cars & Trucks
Mar 23, 2010 | 1990 Ford Mustang
Dec 13, 2009 | 1991 Ford Mustang
Nov 03, 2009 | 2002 Ford Mustang
Apr 14, 2009 | Ford Mustang Cars & Trucks
Mar 04, 2009 | 1992 Chevrolet Lumina
284 people viewed this question
Usually answered in minutes!