Question about 2007 Mazda CX-7 Grand Touring
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Removing the bulb in a CX7 is a real PITA. If replacing the right bulb, turn the steering wheel all the way to the right, or do the opposite for the left side. (or you can opt to remove the entire wheel on the corresponding side) You'll need to remove 3-4 of the fender well clips with a phillips screwdriver being careful not to break them. Once the screws are removed, pry back the wheel well cover to access the back of the headlamp to change the bulb.
Posted on Feb 01, 2010
Open the 2007 CX-7 Owners Manual (here is you don't have one http://www.mazdausa.com/MusaWeb/pdf/manuals/2007CX7OM.pdf)
Go to page 8-35 (P. 331 in the pdf). Close the hood, you're in the wrong place. Remove the cover in the front of the wheel arch to expose the headlight assembly.
Posted on Jun 18, 2009
you need to take it to your local dealer and raise a big fuss because this is a known problem and if you yell loud enough you should be able to get this fixed under warranty.
Posted on Aug 12, 2009
un plug the cable socket at the back side of the headlight then remove the rubber cover at the same place and then there is a steel wire clip carefully remove it (as you have to put it back again) the lamp can be removed easily you have to put the new one in the same direction again so remember what you remove
Posted on Jan 20, 2011
Thanks for choosing FixYa and welcome. These new lights have two types lin one bulb, one for the low beam and one for the high beam. Find the bulb that isn't lighting for the low beam and replace it with a new bulb. If it doesn't work, you need to check the wiring to that specific light. Since it is only one, the new bulb should work.
Posted on Oct 01, 2011
Tips for a great answer:
Nov 29, 2015 | Mazda Cars & Trucks
Sep 08, 2014 | 2007 GMC Envoy Denali
Oct 01, 2011 | 2000 Mazda MPV
Aug 11, 2011 | 2007 Mazda CX-7 Grand Touring
Jan 21, 2011 | 2004 Mazda 3
Nov 04, 2009 | 2007 Mazda CX-7 Grand Touring
Aug 03, 2009 | 2007 Mazda CX-7 Grand Touring
Jun 08, 2009 | 2007 Mazda CX-7 Grand Touring
209 people viewed this question
Usually answered in minutes!