Question about 1992 GMC Sierra K1500

Open Question

No power to fuel pump in 1992 GMC sierra

I've replaced the fuse and relay but my fuel pump (in the tank and only 1 year) is not working. I realize that the fuel pump may be the problem but how can I tell if it's getting any power?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 18 Answers

SOURCE: in-the-tank fuel pump r&r

Here are instructions for replacment with a diagram of the fuel pump components my only suggestion would be instead of draining the tank and dropping the fuel tank if you unbolt the box and using a jack and and some wood lift the fuel tank side of the box this will give you access to the tank and fuel pump/ sending unit. It will save you time and the hastle of replacing the tank straps which are prone to snapping at the threads when trying to remove the nuts.If these brake you will have to replace them.

Posted on Nov 20, 2008

Ad
  • 8 Answers

SOURCE: 1997 gmc sierra p/u 5.0l 2wd needs fuel pump

NO dont drop tank, you will be sorry, take bed off, only like 6 or 8 bolts, and you will have more room to work, and its a pain in the *** to undo the lines and drop the tank, you cant get in there to do it, but just basic tools nothing special, be sure and try not to make any sparks while takein off that ring to get the pump out, and put an ac delco pump on there

Posted on Feb 11, 2009

dennymulford
  • 1055 Answers

SOURCE: 1998 GMC Sierra- runs rough then stalls when

had this problem on my neighbors 98 chevy truck with the same engine !!
it turnd out too be the fuel pressure regulator,you have too pull the upper intake too replace it!!

Posted on Jun 06, 2009

csmock132
  • 4669 Answers

SOURCE: 1987 GMC sierra , no fuel pump power.

The inline fuel pump fuse on the passenger side firewall is good? Are you jumping it with 12 volts at the test lead or the fuse?

Posted on Jun 26, 2009

  • 10 Answers

SOURCE: fuel pump fuse located on 1997 gmc sierra

The fuse is actually a Relay Switch and its located in the Fuse Relay Center on the driverside of the engine compartment. The Black Box is labled Fuse Relay Center, the diagram on the cap displays which Relay is the Fuel Pump relay...the Relay switch is usually $8-$15 depending on where you shop

Posted on Jul 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have no power to fuel pump fuse


2007 GMC Sierra 1500 fuel pump relay Bing Videos


http://www.bing.com/videos/search?q=2007+GMC+Sierra+1500+fuel+pump+relay&FORM=HDRSC3

Jul 24, 2014 | 2007 GMC Sierra 1500

1 Answer

The fuel pump on my 1999 GMC Sierra is not working.


Never tried it, but it should work because it\'s a pain to drop the tank and eyeball it. Electric fuel pump in the tank... ok. It\'s a motor and motors draw current right? One could -possibly- yank the fuse and replace it with a ammeter (DVM on Amps). If the circuit is complete, it should pull 3-4 amps minimum when the pump is running I\'d think. If the circuit is open, it won\'t draw anything, zero or close to it. There may be a small draw from other stuff that\'s on the fused power but the difference should be obvious. Better yet, drop the meter into the relay contact circuit. The only thing that should be on that one is the fuel pump itself. Put one lead on the +12 battery and the other lead into the contact block that goes to the pump. It should turn on. If you\'re squirmish use a pigtail fuse at about 4 amps. The coil and contact arrangement is usually printed on the side of the relay. If not, the contacts are usually on beefier terminals than the coil. If all else fails, get the chassis service manual and look up the color codes.

Dec 26, 2013 | 1999 GMC Sierra

1 Answer

1997 GMC Sierra, I keep blowing the ECM 1 fuse, I replaced Fuel Pump relay and Fuel Filter. Does the ECM 1 Fuse Pump the Fuel Pump, also disconnected the Fiter turned on the key and no fuel.


ecm1 is injectors not fuel pump ecm-b is fuel pump its more likely to be a faulty relay for the injectors, it would be a similiar design to this
12900_oil_sending_unit_and_fuel_pump_circuit_80-yoo05im5qhid2i2poe1uh03c-5-0.gif this is for the fuel system, relay for the injector is nearly the same.

Nov 03, 2012 | 1995 GMC Sierra C1500

1 Answer

I have a 92 GMC Sierra 1500, I need to know where the relay switch is for the fuel pump.. Any help would be greatly appreciated Thanks


the Fuel Pump relay and fuse is under the plastic cover under the hood at the firewall on the passengers side.

Sep 01, 2011 | 1992 GMC Sierra

1 Answer

My 2001 GMC Sierra just made a 600 mile trip. The next morning, the truck wouldn't start (full tank of gas). Replaced the fuel filter, banged on the gas tank. Tried to start the engine again, engine...


When your replaced the pump did you replace the fuel filter? You may have a fuel pump relay causing you some grief. I believe it is located in the engine compartment in the fuse center on the left inner fender. Check the relay and any related fuses. Check the electrical connection at the pump. They had problems with some of them and they would get kind of hot and distort and corrode. They have new updated ones that can be easily installed.

May 14, 2011 | 2002 GMC Sierra 1500

3 Answers

Electrical problem 89 gmc pickup


You could always run a fused wire from the fuse panel to the relay. This way when you turn the key, power goes to the accessory on the fuse panel, the fused wire you installed, and to the relay circumventing the problem and creating a protected circuit.

Feb 27, 2010 | 1989 GMC Sierra

1 Answer

1997 Gmc Sierra fuel pump relay has no power


check fuse and fuse panel connections

Oct 29, 2009 | 1997 GMC Sierra

1 Answer

93 gmc sierra 5.7 liter engine, injection carb, will turn over won't start, replaced fuel pump fuse, replaced fuel pump relay, replaced fuel pump inside gas tank, no gas flow to carb , gas gauge has always...


you say you replaced the fuse, but does the fuse have power? the gray wire at pump should have power when cranking, or for 2 seconds when turning key on. At fuel pump relay, put power onto gray wire, the pump should run if the wiring is good. if it doenst run then ck for power at fuse while power is on gray wire.

Oct 19, 2009 | 1995 GMC Sierra C1500

Not finding what you are looking for?
1992 GMC Sierra K1500 Logo

Related Topics:

273 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...