Question about 2004 Saab 9-3

Open Question

2004 Saab gearbox malfunction light comes on and now car won't start

Gear box malfunction light comes on and car won't start

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: I have a Gearbox malfunction linited performance

9 time out of 10 it is either (1) computer glitch; (2) the input speed sensor; (3) a wiring short; or (4) neutral safety switch. If your tranny operates fine even with the message (the message may disappear after a few starts), that means the problem is most likely with one of the above, rather than the tranny itself. Your car generates error codes that a Saab deal with a Tech 2 Scanner can read. That will pinppoint the error source. Good luck.

Posted on Jul 12, 2010

Ad
  • 1 Answer

SOURCE: 2004 Saab 93 - glove

Give me some more information about this problem. May be i can help.

Posted on Jul 14, 2011

SOURCE: what does gearbox malfunction mean

Hi Buckbird, Take the vehicle for a diagnostic scan. The signal means that he on board diagnostics have picked up a fault! Maybe the transmission oil is low. Reduce speed advises you to get to your dealer or diagnostic center at a low gentle speed. Regards Johngee10

Posted on Aug 18, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2004 saab 93 key wont turn.the lights come on but the little brakes indicator wont light up on my gear slot but my emergency brake is stuck on and it says steering lock malfunction on my s.id


You can't turn the key due to the steering lock malfunction, you now need to have the systems control module scanned for faults. That is the first step to diagnose and repair this fault. You will need a special scan tool for this, so find a shop that has one that will read this Saab system codes.

Nov 03, 2016 | Saab Cars & Trucks

2 Answers

I have a 1997 Saab se turbo 2.0 the check gearbox light comes on then a week or so later will go out any help would be great thanks keith


Check engine and check gearbox on an automatic...neutral safety switch is going out. First couple starts like that and it seems like it's in limp home mode...it is. A few more starts and it will reset itself. Mine did so reliably at the 5th restart until I changed it.

Get a used on if you can, they are not really rebuildable reliably. Pain to change, it's under the battery tray and miserable to get to.

Jan 01, 2014 | 1997 Saab 900

1 Answer

2000 saab 9-5 gearbox light stays on


The warning light will stay on until you rectify the problem with the box. Warning lights are not there to annoy drivers or to be ignored.

Dec 25, 2012 | 2000 Saab 9-5

1 Answer

Yellow engine diagnostic indicator light, p0700


po700 --transmission control system malfunction --your gear box or a control to the the gear box is your problem
P0700 Transmission Control System Malfunction P0700 Transmission Control System Malfunction

Apr 17, 2017 | Mercedes-Benz Mercedes Benz A Class Maisto...

1 Answer

04 SAAB 9-3 THREE CODES P1743, P0735, P0734, TRANSMISSION WON'T SHIFT


Could be that a sensor has failed.My suggestion would be have local shop scan it....Could be so many things.......

Aug 16, 2012 | 2004 Saab 9-3

1 Answer

What does gearbox malfunction mean if it comes on then goes off. it said gear box malfunction reduce power see saab dealer. said it 3 times in about 2 hours then it stopped. now doesnt say it. but never...


Hi Buckbird, Take the vehicle for a diagnostic scan. The signal means that he on board diagnostics have picked up a fault! Maybe the transmission oil is low. Reduce speed advises you to get to your dealer or diagnostic center at a low gentle speed. Regards Johngee10

Aug 18, 2011 | 2004 Saab 9-3

1 Answer

I have a Gearbox malfunction linited performance signal on my 2004 Saab 9-3 2.0 turbo and i'm wondering what may have cased this problem.


9 time out of 10 it is either (1) computer glitch; (2) the input speed sensor; (3) a wiring short; or (4) neutral safety switch. If your tranny operates fine even with the message (the message may disappear after a few starts), that means the problem is most likely with one of the above, rather than the tranny itself. Your car generates error codes that a Saab deal with a Tech 2 Scanner can read. That will pinppoint the error source. Good luck.

Jun 24, 2010 | 2004 Saab 9-3

1 Answer

Check gearbox light, car drives sluggish,heater cuts off.


You have a bad gearbox position sensor located on the transmission. When the transmission computer sees the fault in that sensor it goes into a protective mode in your car starts out in second gear that's why it is sluggish. This is a very common failure on that car. The heater issue is not related.

Jan 16, 2009 | 1995 Saab 900

2 Answers

Sensonic gearbox


you have an eletrical problem most likelly one of the main fuses is burt or a open circuit, this could happend when jump start some one else or your own car

May 20, 2008 | 1996 Saab 900

Not finding what you are looking for?
2004 Saab 9-3 Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saab Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

rgbypoet

Level 2 Expert

166 Answers

Are you a Saab Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...