Question about 2000 Ford Expedition

Open Question

1998 ford explorer 2 door sport owners manual

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 92 Answers

SOURCE: 1998 Ford Explorer sport 4.0L 4x2 PCV Valve Location

the pcv is located on the rear(firewall) of the drivers side valve cover.turn counterclockwise and pull to remove be careful there are 2 small tabs inside the pcv hole in the valve cover(can feel with small finger) this is to hold valve in place so it wont leak.if you have a oil leak at the pcv a quick fix is to put a small amount of silicone around the pcv o-ring and install.wait hours for silicone to set up.

Posted on Oct 21, 2008

Ad
  • 1 Answer

SOURCE: 2001 Ford Explorer Sport

Common problem on 2001 Ford Explores. The reason why your door handle doesn't unlock the door(can't be unlocked by remote either)is due to a broken spring located on the backside of the door handel INSIDE the door. True that your one(or two) of your small exterior springs on your door handle are broken(will cause your handle to flap) but this IS NOT YOUR PROBLEM. The door locks will work if there is a bit of tension holding the handle bracket up. I know it's hard to explain without pics. but here's the ONLY WAY TO FIX THIS. It's not that hard.......... Remove the door panel, only a few screws and a few more holding trim around exit handle then, pull out "snap in" clips on bottom. With a flashlight you'll see back side of door handle. To get to that area you'll have to remove one bolt holding a window frame. Do that(with window in up position) then slide down rail, out of your way. Now, get back to handle. With your light aimed at the backside of handle left slowly the door handle as normal, and you'll realize(while looking at the mechanism) that tension(pulling down of bracket) needs to occur in order for locks(manual and remote)to work properly. Trust me.....you'll figure it out. Once you do, get a spring(pen spring, 30 cent hardware store spring, any small spring!) and hook one end to bracket and the other end to ANYTHING(OUT OF THE WAY) below the door handle thus, causing SLIGHT tension. Try your locks...THEY WILL WORK! YEAH! Replace that one window frame bolt(try your window...just the make sure), replace door panel and your done. TOTAL COST: 30 cents or FREE(if you have a small spring) Ford dealers will charge $150 to $285! Yikes!

Posted on Jun 14, 2009

  • 1 Answer

SOURCE: my driver side door won't lock or open

I have a 2003 chevy silverado and the passenger side power window does not lock or the window wont go down.

Posted on Mar 02, 2010

ZJLimited
  • 17970 Answers

SOURCE: 2001 ford explorer sport, door keypad reset

How to find the Security Keyless Keypad Code on the 1995-2001 Ford Explorer or Mountaineer and how to use the Keypad functions. The factory code is also printed on a label which is installed on the Remote Anti-theft Personality (RAP) Module. This is the module that controls the keyless entry system. It is located in the left rear quarter behind the removable panel (see photo). You will need to turn the two thumb screws counter clockwise and take the plastic panel off to be able to see the unit. A flashlight may be helpful in seeing the code. You are looking for the module and the 5 digit code on it like the one shown below.

1948e32.jpg


Now that you’ve got the code I’ll tell you how to use the Keyless entry and set-up your own code.Make sure when pressing the controls on the keyless entry keypad you press the middle of the buttons to ensure good contact with the controls.

4f796b1.jpg

Check this for Programing the Keypad.

Hope this help (remember rated this comment).

Posted on Mar 29, 2010

ZJLimited
  • 17970 Answers

SOURCE: Does the horn have a fuse or a relay on a 2001Ford Explorer Sport

Check in the passenger fuse panel (driver's side), location 6, 10AMP (Right Horn)...

c6d296f.jpg

And, in the Power Distribution Center (underhood), position 28, 20AMP (Minifuse)...

19dd235.jpg

Other details can find HERE (page 227 and next)

I hope help with this (remember rated this post). Good luck.

Posted on May 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Which fuse is for the headlights


located on drivers side of dash board open door and will see access panel number 33 and is a 15 amp fuse following link is owners manual page 138 starts and shows all information for fuses
1998 Ford Explorer Owner Guide 1st Printing

Jul 06, 2016 | 1998 Ford Explorer

1 Answer

Fuse box diagram for 2005 explorer sport


Nicholas, Fuse box info. starts on page 230 of the attached link/manual for your vehicle. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
http://www.fordservicecontent.com/Ford_Content/catalog/owner_guides/05expog3e.pdf
https://owner.ford.com/tools/account/how-tos/owner-manuals.html?pagename=Owner/Page/OwnerGuidePageVehicleLookup&BackToLogin=Owner/Page/OwnerGuidePage&ord=73366471
Interior Fuse Box Location 2002 2005 Ford Explorer 2002 Ford Explorer XLT...
2005 Ford explorer sport fuse box diagram Google Search

Jul 03, 2016 | Cars & Trucks

1 Answer

Find code for door entry on 2008 ford explorer sport trac


The Factory Code came with the owners manual
& in the keyless entry on the door,then you can change it

If you don't have that, then your going to pay a dealer
to resolve the issue, if you don't know what is in there now,
so you can change it,again the instructions are in the manual

Mar 10, 2014 | 2008 Ford Explorer

2 Answers

I need a fuse panel diagram for my 2002 ford explorer sport trac 4x4


Check in your Owners Manual or download this document from this link: Ford/maintenance/owners_manuals

Hope helps (remember to rate this answer).

Apr 11, 2011 | 2002 Ford Explorer Sport Trac

1 Answer

1998 ford exploer sport fuse diagam


https://www.fleet.ford.com/maintenance/owners_manuals/default.asp

Select your vehicle and look for fuses on the pdf. The owners manual gives a great diagram.

May 04, 2010 | 1998 Ford Explorer

1 Answer

AC only works on max, but blows hot air in all other settings


your problem is in the blower motor speed controller and it is near blower motor

Aug 02, 2009 | 1998 Ford Explorer

1 Answer

PASSENGER SIDE WINDOW WONT UNLOCK 1998 FORD EXPLORER SPORT


I remember when I had my 1998 F150, which is virtually the same vehicle as a truck, I had this same problem and found it to be a child lock.

Apr 23, 2009 | 1998 Ford Explorer

1 Answer

No reverse..1998 exporer sport 2 door 4x4 sohc v6 auto


your transmission part number for a motocraft rebuilt trans would be TRM1341, as far as they list it the transmission was only for that year, meaning you would need to find another 1998 explorer or 1998 mercury mountaineer in order to replace your trans. hope this helps :)

Nov 21, 2008 | 1998 Ford Explorer

Not finding what you are looking for?
2000 Ford Expedition Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...