Question about Peugeot 306
Car Repair Manual Peugeot 306 Petrol & Diesel
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Several things can cause this overheating. Have you recently done a:
1. Check Hoses for Leaks
2. Check Radiator for Leaks --- Also, Change Radiator Cap ( can loose pressure there if
cap is bad)
3. Check Water Pump for Leaks. If Water Pump is bad, you will hear a loud noise from it
4 Complete Tune Up? Should be done at least 1x a Yr. Depending on how much you drive the Vehicle. Includes: Plugs, Plug Wires, Gas Filter, Air Breather Filter, PCV Valve, Adjust Timing,
Check Belts -- see if worn
5. Changed your Thermostat & Gasket and have the correct degree Thermostat in the Vehicle?
6.. Had your Radiator Rod and Cleaned out?
7. Temperture Sending Unit (located near Thermostat) could be bad
8. 02-Sensor (Generally located in the Exhaust Manifold - needs a socket with a space in it
to allow the Socket to fit over this top wire of the 0-2 Sensor )
9. Change oil and oil Filter.
10. Change Gas Tank Cap ---
Do all this yearly ( except the Radiator Rod & Clean ( do every 2-3 yrs), and you should not have
any over-heating nor stalling out, etc. and should pass emissions as well.
Posted on Nov 25, 2008
Dashbord fault, Quite a common fault, try resetting it by diconnecting and reconnecting the battery, this usualy works.
Good luck Davelee
Posted on Apr 05, 2009
can you help my pug 206 when starting from cold engine seems like it,s only firing on three cylinders then when engine is hot seems okay but looses power on hills 206 automatic 1.4 engine if anyone can help
Posted on Apr 14, 2009
hi i have a garage this problem i encountered myself the other week disconnect the battery for about five minits and then reconnect this solved the problem on this P reg 306 good look if you have not sorted your problem.
Posted on Jul 07, 2009
I am with a similar problem...
After putting on a new sump i found that the starter motor would work cranking the engine but no power is going to the glow plugs. The light on the dash does not appear either.
The relay for the coils does click but that is the end of it. I have a suspission it is the imobiliser but after taking the battery on and off several times to reset... still nothing.
There is fuel, good battery (fully charged), fuel lines are clean pressurised...
Posted on Feb 11, 2010
Tips for a great answer:
Aug 11, 2015 | 2000 Peugeot 306
Jul 15, 2014 | 1995 Peugeot 306
Jun 11, 2014 | 1999 Peugeot 206
Sep 09, 2012 | Peugeot 406 Cars & Trucks
Dec 02, 2009 | Peugeot 405 Cars & Trucks
Sep 14, 2009 | 2005 Peugeot 405
Jun 08, 2009 | Peugeot 405 Cars & Trucks
Dec 16, 2008 | 1991 Peugeot 405
May 19, 2008 | 1987 Peugeot Liberte
42 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: