Question about 2004 Hyundai XG350

Open Question

How to remove back seat of hyundai xg350 2004

One of the rear seat belt latches was left under the back seat when the seat was removed for repairs. We just noticed that now months later and we are away. We need to remove the rear lower seat to move the latch to the usable space because we have company and need to use the rear seatbelts.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: 1999 hyundai elantra just had

hi new belts should not make any noise.if the belts are making noise i would return to the place you had the work done. therumbling/grouling is usuraly from a bad iddler pully/thenshioner pully or a bad wheel bearing.

Posted on Jan 30, 2009

alicantecoli
  • 22156 Answers

SOURCE: door panel removal

pull handle back and you will see a screw

Posted on Feb 01, 2009

michigan man
  • 3533 Answers

SOURCE: how to open tail gate on 2004 hyundai when latch wont work

from inside if you can get to the panel and remove it to reach the mechanism to open the tailgate and try autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you

Posted on Mar 21, 2009

232K7
  • 26 Answers

SOURCE: Hyundai 2006 Sonata high mount brake light.

the rear seat does NOT have to be removed in order to replace the stoplamp and/or its bulb.
you have to get into the trunk, and there are (2) philips screws holding the stoplamp secured to the package tray. the actual process takes about 15 minutes, because to do it right you have to actually get IN the trunk.

the price they charged you sounds about right if the price of the stoplamp is included, dealerships tend to overcharge for parts.

Posted on Apr 14, 2009

  • 57 Answers

SOURCE: need instructions on removing hyundai santa fe 01 fan belt ac

its your serpentine belt (thats what its called) and you will need a 3/8 ratchet and then find the belt tensioner. The tensioner has a spot where you need to put the ratchet into and pull or push depending on whatever way and that will releive the pressure off the belt so you can take it off.

Posted on Apr 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to replace the left rear seatbelt in my VW Jetta my10, how do I go about it?


all the jetta rear seats and seat belt parts
look the same sort of set up

fiddly job
back seat section or sections out
have to remove some plastics
to get to the retractable part of the belt ....looks like it is
under or mounted on the rear parcel shelf
undo the floor mount

then re thread and bolt the new seat belt in (pictured)

then replace the seats

26227982-baaqz4pc4guywvkqfm2wgc1t-4-0.jpg

26227982-baaqz4pc4guywvkqfm2wgc1t-4-1.jpg

Jun 29, 2016 | Volkswagen Jetta Cars & Trucks

1 Answer

How to change the third break light bulb in a 2007 hyundai sonata ?


From 2006 to 2010, the Sonata's 3rd brake lamp requires the rear package deck be removed to access that bulb.
1. Remove the rear passenger seat bottom (remove two12mm bolts between the seat back and the seat bottom - tilt the seat back forward to locate these bolts).
a. Press the two bottom front edge tabs to release the front of the seat bottom from the floor.
b. Remove seat bottom & set aside w/two 12mm bolts
c. Tilt both seat backs downward
2. Remove the left & right hand shoulder cushions (12 mm bolt at the bottom of each cushion)
a. Remove seat belt from shoulder cushion guide at the top of the cushion
b. Lift up and forward on shoulder cushions to remove them (if equipped with side airbags, disconnect wire harness connector).
c. Set shoulder cushions aside w/two 12mm bolts
3. Using a small flathead screwdriver, pop out the 'SRS' button cover from the C pillar panels on the left & right hand side to access either the phillips head screws, 10mm bolts, or #30 Torque Screws
a. Remove screws and set aside
b. Using a standard flathead screwdriver, pop out the C pillar panels on both sides (clips hold these panels in place)
c. Set these panels aside after removal w/screws/bolts
4. Trunk Access-way panels are held in place by phillips head screws (two at the bottom (left and right hand sides) and 4 to 5 at the top .
a. Remove left and right hand panels and set aside w/screws.
5. Rear package deck held in place with two plastic clips (white, yellow or pink)
a. lie on your back inside the trunk (trunk lid open to allow for more light). Looking through access hole find 3rd brake light wire harness connector & disconnect.
b. locate package deck clips, one on the left and another on the right on the underside of the pckage deck
c. Squeeze clips to push them out - package deck will come loose
d. Remove package deck & remove 3rd brake lamp bulb socket (turn counter clockwise to remove). Replace bulb & reassemble in reverse order.

Sep 05, 2011 | Hyundai Sonata Cars & Trucks

1 Answer

How to remove the rear seat of a Honda Ridgeline 2010.


1. Pull the plastic panels under the seat bottom straight forward to remove them.

2. Remove the six bolts (14mm) holding the seat and center seatbelt in place.

3. Pop the two small plastic covers at the top and behind the seat using a trim removal tool or screwdriver tip covered in masking tape.

4. Lift the seat straight upward.

5. Remove.

The Service Manual states a 35 ft lb torque and must be re-installed in a certain sequence for the 6 seat anchor bolts (not the seat belt bolts). When putting the rear seat back in install the bolts in this order. (1) center left (2) center right (3) left lower (4) right lower (5) left upper (6) right upper.

Nov 09, 2010 | 2008 Honda Ridgeline

3 Answers

How do i remove the rear seat in my 2000 hyundai sonota


pull up on the back bottom part of the seat-bottom and slide the - back seat up

Feb 12, 2010 | 2000 Hyundai Sonata

1 Answer

Spilled milk under the rear seats in my 2006 Ford Fusion SEL.


its not hard, the seats are meant to be removed fairly easily, there are two latches under the seat about a foot in from each edge that have to be released (i think you just reach up under and then its just like a trunk or glove box latch, then push back on the seat and lift up on the front and it should pull out.

Oct 04, 2009 | 2004 Ford Fusion

1 Answer

2003 Volkswagen Passat Center Rear Belt Locked


The fix is:
  • remove the seat bench,
  • unscrew the bolt attaching the seat belt to the body,
  • return the seat back to its upright position and make sure it latches
  • reattach the seat belt
  • replace the seat bench
To prevent this from happening again:
  • Leave the seat belt latch in its receiver when not in use.

Aug 09, 2009 | 2001 Volkswagen Passat

1 Answer

How to remove the back seat from my 1998 Mercury Villager


it is not designed to be removed. It is designed to slide back and forth as needed.

Section 01-10: Seats and Tracks 1998 Villager Workshop Manual
REMOVAL AND INSTALLATION Seat, Rear Bench
Removal
  1. Remove the center seat(s) if equipped. Refer to the procedure in this section.
  1. Slide the bench seat forward to the center row seating position.
  1. Use a flat-blade screwdriver to remove the cover caps from the front of the rear seat cushion latch cover.




  1. Remove the two rear seat bolts from the front of the rear seat cushion latch cover.




  1. Lift the rear seat cushion floor cover on the back of the rear bench seat and remove the two inboard rear seat bolts and the two outboard rear seat bolts.




  1. Remove the bench seat from the vehicle through the body side door opening.

Apr 30, 2009 | 1998 Mercury Villager

1 Answer

Factory XM Unit Location


Hi Xit.....The factory XM module is in fact located under the rear shelf trim panel. You will have to remove the rear seat cushion, just pull up on the front of the cushion about 12 inches in from left and right corners. Remove the cushion from the car. Open the trunk and remove nuts located on the seat back just under rear shelf metal. Back inside the rear seat area, remove the seat belt buckle bolts located inboard of right and left lower corners of the seat back. Remove the seat back. You will now be able to see the (2) plastic fir tree pins that hold the shelf panel trim in place. Remove the pins.
Now comes the hard part, remove the right and left quarter sail interior trim panels ( Caution: roof rail air bag located behind right and left panels) the fasteners are located behind the "SIR" plastic buttons in the sail panel trim.
All in all, unless you have the proper tools and take the proper precautions, you might want to take your Cadillac to your local dealer.
Buy the way, is there something wrong with your factory XM module?
Let me know, regards.

Feb 05, 2009 | 2006 Cadillac CTS

1 Answer

Replace rear seat belt in 1993 Toyota Corolla


OK. On the front edge of the seat bottom cushion, pull up hard, both sides. This will dislodge the 2 clamps that holds the seat cushion to the floor. Pull the seat cushion out & set it aside. You will now see the female latches bolted to the area where the rear of the seat cushion meets the rear seat back bottom. Remove the bolts (14 mm I think).

Oct 07, 2008 | 1993 Toyota Corolla

Not finding what you are looking for?
2004 Hyundai XG350 Logo

Related Topics:

228 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...