Question about 2006 Dodge Grand Caravan

Open Question

Serpentine belt routing for 2007 montana 3.9 - 2006 Dodge Grand Caravan

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 196 Answers

SOURCE: 1992 dodge grand caravan 3.3 serpentine belt routing

There should be a digram under the hood.

Posted on Jan 11, 2009

  • 1348 Answers

SOURCE: serpentine belt diagram 2007 dodge 5.9 3500

get the belt routing from the local dealer.
they will not charge alot of money for a reprint from the factory service manual.
also
dayco belts come with the belt routing on the box.

Posted on May 28, 2009

t1randa
  • 27 Answers

SOURCE: Serpentine/drive belt routing diagram of a 2002 dodge Intrepid needed.

check dodge website you have to register to get the owners manual which has or if you have your owners manual

Posted on May 29, 2009

  • 312 Answers

SOURCE: belt routing diagram for 2007 caliber w/ 2.4

If you register here: http://www.caliberforumz.com you can download a free copy of the repair manual for your car in the "General discussion" forum. That manual will have the diagram you are looking for.

Posted on Sep 13, 2009

  • 1757 Answers

SOURCE: Need serpentine belt routing diagram for 1994 Dodge grand caravan

3.3L?
Looking at the engine from front (right side of the Van): Stating at the Top, Going Left to Right and Clockwise:
Over the Alternator
To under the Idle Pulley,
To Over the AC Compressor.
To the Left Side of the Water Pump.
To the Right side and Under the Crankshaft Pulley
To the Right side and Over and Down the Tensioner
To Under the Power Steering Pump
And Back up-to the Left side of the Alternator.
Advise when puting it on:
Put the Belt around everything else accept for the Alternator. After it is around all the rest of the Pulleys - Pull the belt up - tight from the Power steering Pump and the Idle Pulley to form a loop, holding the Belt close to the Altenator Pulley.
Using the 15mm wrench or belt tensioner bar - rotate the Tensioner Pulley towards the front of the Van and then place the belt over the Alternator.
Let me know if this helped or if you have additional information or questions. Feel free to contact me at FixYa.com!

Posted on Jan 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a serpentine belt diagram for a 2000 Pontiac montana


Usually the belt diagrams are under the hood or near the radiator in many cars. However, if you type "2000 pontiac montana belt routing" into Google, you will find the diagram.

Apr 17, 2015 | 2000 Pontiac Montana

1 Answer

Where can I get a copie of the serpentine belt routing on a 2007 Chrysler Sebring engine 2.7?


If you can't find the diagram, you will need to draw out the routing direction of the old serpentine belt so that you can properly route the new serpentine belt around each pulley. or you can go to any auto parts store and they should be able to give you a diagram, or go to dealer to get a red out or diagram of your old belt. Good-Day!

Jul 26, 2014 | Cars & Trucks

1 Answer

I replaced the power steering pump on mt 2000 montana and it keeps throwing the belt off..why?


pulley on which belt is routed is worn out or belt is not original.But original parts and see if that makes a difference.Or the belt is not getting routed properly.

Below is the master help link provided to go through belt routing diagram:---Timing belt, drive belt, serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all types of car models?
Click the link below: ----

http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help. Thanks.

Feb 15, 2012 | 1999 Pontiac Montana

1 Answer

Serpentine belt and belt tensioner replacement


Below is the master help link provided to go through belt routing diagram:---Timing belt, drive belt, serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all types of car models?
Click the link below: ----

http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help. Thanks.

Feb 15, 2012 | 1999 Pontiac Montana

1 Answer

Install 2003 pontiac montana serpentine belt


The serp belt tensioner will be in between the alternator and the power steering pump. Use a 3/8 ratchet and insert it into the square hole of the tensioner. Rotate the tensioner to remove the tension from the belt.

It doesn't hurt to draw a picture of the belt routing before removing the belt. Most GM's will have a diagram of the belt routing. I think yours is located on the plastic cover that is near the water pump.

If you don't have a diagram the belt is routed like this.

From the crank pulley the blet goes to the a/c compressor then under the water pump pulley then over the power steering pump and the alternator. then down to the p/s pump, over the tensioner pulley and finally ending up at the crank pulley.

Let me know if you have any question and I'll be happy to help. Thank you for using fixya.com!

Feb 05, 2012 | 2003 Pontiac Montana

1 Answer

I need a diagram routing for a serpentine belt in a jetta 2007


The diagram routing for a serpentine belt in a VW Jetta 2007, 2,0 FSI engine.
See picture below:

0a3cd9e.jpg
CS = Crankshaft
F = Fan pulley
Gen = Alternator
T = Tensioner
AC = Air Conditioning
PAS = Power Assisted Steering
WP = Water Pump

Aug 08, 2010 | Volkswagen Jetta Cars & Trucks

1 Answer

How do you replace a fan belt on a 2004 pontiac montana


Here's a series of videos that explains how to replace the serpentine belt on your 2004 Montana.

http://www.wonderhowto.com/how-to/video/how-to-change-a-serpentine-belt-on-your-car-39904/

Here's a diagram to help you remember how to rout the new belt...

6f452ae.jpg

Nov 30, 2009 | 2004 Pontiac Montana

1 Answer

Serpentine belt diagram 2007 dodge 5.9 3500


get the belt routing from the local dealer.
they will not charge alot of money for a reprint from the factory service manual.
also
dayco belts come with the belt routing on the box.

May 28, 2009 | 2007 Dodge Ram Truck

Not finding what you are looking for?
2006 Dodge Grand Caravan Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...