Question about Cadillac DeVille
How to change water pump on a 1993 cadillac deville
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Water pump is located on the side with all the belts. Find the water pump pully and LOOSEN the bolts that keep the pully on the shaft of the water pump. Once they are LOOSEN remove the belt. Then you can remove the pully bolts the rest of the way. Pully MIGHT be stuck on there, a couple of taps should loosen it enough to where you can pop it off by hand. Now if I recall this vechile correctly, there MIGHT be another pully that will hinder you. It's just easier to take it off right away. It's right above the water pump. I BELIVE it's an idler pully. Dosn't do anything but to help keep the belt on it's correct path. There should be one bolt in the middle of this pully, undo the bolt and pully will pop off. Make sure you REMEMBER how it was on. So that you put it back on the right way. Then, there are 2 or 3 different sized bolts that keep the water pump on. Remove the bolts, one at a time, and make sure you REMEMBER where they went. If you remember now, it will save time guessing later. Ok, once you are sure that ALL the bolts are removed, you can try to pop off the pump. If it dosn't come by hand, use a screw driver to pry a corner up and then do the rest by hand. Once it's off, it's time to clean the motor side of the pump. See, on these cars it's not a complete pump like it use to be, it's a half pump. Meaning, when you look at one side you can see the fins that move the water. Anyways, when you are at the parts store, pick up some emery cloth. It's sort of like sand paper. Well, once the pump is off, use a razor blade and scrape off the silcone that's on the block. Then use the emery cloth to make is nice and clean getting all of it off. Once that's complete, put the new gasket on the pump and reinstall. Put all the bolts in BEFORE tighting them down. And when you do tighten them, do it by hand! Using an air tool will break the bolt or strip the threads in the alunimium block and then it has to go to a mechanic. Once all the bolts are tight fill up the reservor to check for leaks. Also go back over the bolts one more time and make sure all are tight. Doing this now, will save you headace later. Then put the rest of the things back on in the order you took them off. That's it exepct for bleeding the cooling system. I assume you know how to do this, if not, let me know.
Posted on Oct 20, 2008
Water pump is located on rear of the engine. faceing the car it is between the radiator and the head. It is driven by a small belt. It is removed by removing a cover plate that has the radiator host and by pass hose connected to it. it takes a special tool to remove and install this item. it is available at most auto stores. approx. 2 hour job and somewhat a hard job . see the haynes manual for this car very detailed on how to change the waterpump. jim
Posted on Dec 25, 2008
Posted on Mar 21, 2009
hello. it should be located under your car on a line that's coming off your fuel tank and yes you can do this your self very easy to do ,you'll need a few box/open ended wrenches that's it you'll need to check the fitting or the nut on each side of the filter to see what the sizes are,befor removing the filter you'll want to take off your gas cap and remove your neg battery cable ,not when you find the filter it'll have nut on each side all you have to do it loosen them but make sure that you don't break the fuel line or kink it and after you have both sides loose then just finish turning them off and there you go the filter is off, nope no removing the gas tank some newer models you do and the filter is attached to your fuel pump and don't need replaced but for your car and year you wont need to remove the tank. good luck
Posted on Mar 25, 2009
Tips for a great answer:
Sep 07, 2014 | 1993 Cadillac Seville
Dec 17, 2012 | 1995 Cadillac DeVille
Fig. Water pump assembly-4.6L Northstar engine (click image for zoom)
Fig. Remove the water pump belt shield
Fig. Remove the water pump adjuster pulley retaining bolt and
Fig. Remove the water pump retaining bolts
Jul 16, 2011 | 1997 Cadillac DeVille
May 31, 2011 | 1993 Cadillac DeVille
Nov 13, 2009 | 1995 Cadillac DeVille
Apr 08, 2009 | 1994 Cadillac DeVille
Mar 07, 2009 | 1993 Cadillac DeVille
Feb 21, 2009 | 1992 Cadillac DeVille
934 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: