Question about 2006 Isuzu Ascender

Open Question

How to fix code p0496 on 2006 isuzu ascenders

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 375 Answers

SOURCE: Isuzu Ascender Fuel Filter

all you have to do is follow the fuel line from the fuel tank to find it. most likely it is at the rear of the engine and that is why it is hard to spot.

Posted on May 18, 2008

Ad
  • 285 Answers

SOURCE: check engine light on 2005 isuzu ascender, code

that code means that the coolant is cooler than it is supposed to be and it cannot be regulated...which means the thermostat is stuck open or broken,so replace the thermostat and that should solve your problem,hope this sheds a little light on it!

Posted on Sep 26, 2009

  • 491 Answers

SOURCE: where is the rear windshield washer well in a 2006

THE REAR WINDSHIELD WASH IS FED BY THE SCREEN WASHER FLUID RESERVOIR IN THE ENGINE CONPARTMENT.

Posted on Oct 25, 2009

freetek
  • 5568 Answers

SOURCE: have to replace my alternator on 2006 Isuzu

IF the belt has a convoluted path, take a snapshot of it to avoid problems later. Also, always disconnect the negative battery terminal first, then the positive terminal.
You might use dielectric grease on any current carrying connections when reassembling stuff; at the least, some Vasoline. This will stave off future corrosion for a while.

Posted on Oct 30, 2009

  • 1810 Answers

SOURCE: 2007 isuzu Ascender keyless entry. I can hear a

sounds like a bad lock mech open door up and check acuator

Posted on Jan 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2004 Isuzu ascender and the check engine


could be coil or injecter what is wrong with it is it missfiring

Oct 13, 2014 | 2004 Isuzu Ascender

2 Answers

What is electronic control unit 10 p0256 means on 2005 Isuzu ascender?


code p0256 refers to injector 2---circuit high===causes wiring short to positive ---injector---ECM
check wiring is good at connections
replace faulty injector

Sep 29, 2014 | 2005 Isuzu Ascender

1 Answer

How replace smog pump in 2005 Isuzu Ascender


How do you know the pump is defective, what is the code?

Aug 31, 2014 | 2005 Isuzu Ascender

1 Answer

2005 isuzu ascender random misfires code


Po300 codes are system generated caused by computer can not locate real failure condition. Coil on plug engines the coil boots fail and wider gap spark plugs wrong spark plugs by design, secondary ignition wires, vacuum leaks, poor fuel quality, plugged fuel filter, low fuel pressure , leaking pressure regulator, unmetered air between mass air flow sensor and throttle body, crankcase ventilation leak.

Nov 07, 2013 | 2004 Isuzu Ascender

1 Answer

Where does the crankshaft position sensoe go on an 05 Isuzu Ascender???


What engine? V6 or V8?
The Ascender is the same as a Chevrolet TrailBlazer, GMC Envoy, Buick Rainier, and Saab 9-7X. Look on the Chevy forums for where/how to change this. It should like like this - maybe:


10_1_2012_9_38_30_pm.jpg

GL,
Td

Oct 01, 2012 | 2005 Isuzu Ascender

1 Answer

H0w do i fix p0601 on a 2006 isuzu ascender


well i can tell you what it is ,
(internal controler failure)
internal control module fault condition (check s u m )detectede
hope this helps

Sep 29, 2012 | 2006 Isuzu Ascender

1 Answer

Pcm and flashing for 2006 isuzu ascender. error code P0601 pcm/tcm memory error. vehicle is no crank no start


ok this is the second one today , internal controler failure
bttter knowen as (internal control module fault condition detected, (
check s u m )

Sep 29, 2012 | 2006 Isuzu Ascender

1 Answer

I had a P0410 code. I repladed the air pump on my 05 Isuzu Ascender and the check engine light came back on the next day after replacement.


this is an obd2 trouble code table, it canhelp you understand the meaning of code.
for this code youc can try:

Replace the AIR pump AND one-way check valve

Test and clean the AIR pump AND test and replace the one-way air check valve

Replace the AIR pump inlet hose

Replace the AIR pump fuse (found under the hood)

Jul 29, 2011 | 2005 Isuzu Ascender

1 Answer

Check engine light on 2005 isuzu ascender, code PO128 is given...help!!


that code means that the coolant is cooler than it is supposed to be and it cannot be regulated...which means the thermostat is stuck open or broken,so replace the thermostat and that should solve your problem,hope this sheds a little light on it!

Sep 26, 2009 | 2005 Isuzu Ascender

Not finding what you are looking for?
2006 Isuzu Ascender Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...