Question about 1993 Toyota Corolla
Posted by Anonymous on
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
OK. On the front edge of the seat bottom cushion, pull up hard, both sides. This will dislodge the 2 clamps that holds the seat cushion to the floor. Pull the seat cushion out & set it aside. You will now see the female latches bolted to the area where the rear of the seat cushion meets the rear seat back bottom. Remove the bolts (14 mm I think).
Posted on Oct 07, 2008
You cannot guess with these cars,these vehicles have a lot of sensors and actuators can can go bad at anytime, here is my suggestion take your vehicle and to Auto_zone and have them check the codes, they will be able to tell you what they mean. ITS FREE.. then get back to me if you need more help.
Posted on Dec 23, 2008
Follow your upper rad hose to where it connects to your upper of part of your engine. It should be be easy to spot the expanded housing that the hose goes to. it's in this housing. Hope that helped.
Posted on Jan 05, 2009
Headlights are wired to receive a constant "hot" even when your keys are out of the ignition. Your problem, more than likely, is in the switch. Depending on what type of switch you have, you can expect to pay between $20-$80 for a new one.
Posted on Jun 07, 2009
Tips for a great answer:
Feb 08, 2017 | Toyota Cars & Trucks
Sep 29, 2014 | 1994 Toyota Corolla
Feb 10, 2011 | 1994 Toyota Corolla
Jan 18, 2011 | 1993 Toyota Corolla
Oct 06, 2010 | 1996 Toyota Corolla
Jan 09, 2010 | 1998 Toyota Corolla
Jun 18, 2009 | 1991 Toyota Corolla
Jan 05, 2009 | 1993 Toyota Corolla
151 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: