Question about 2004 Toyota Camry

Open Question

How to reset oil light on a 2004 toyota camry after an oil change 2.4 litre

How to turn off oil light on a 2004 toyota camry 2.4 engine after an oil change has been performed?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1861 Answers

SOURCE: oil change light

Turn the key on. Observe the odometer. Is "ODO" displayed? If not, push the trip meter button until "ODO" is displayed, with the total mileage travelled shown.
Turn the key off.
Push & HOLD the trip reset button until advised to release it.
Turn the key to "ON" (do not start engine)
Observe the ODO display.
You should see 5 dashes, then 4, then 3, then 2, then one, and finally, five zeros.
The original mileage that you observed should be redisplayed.
Release the trip reset button.
The proceedure is now complete.

Posted on Sep 22, 2008

  • 1861 Answers

SOURCE: 2004 Toyota Camry Brakes

Raise the vehicle up and remove the rims & tires

Remove the brake pads, and then remove the calipers from the caliper retention brackets, do NOT remove the brake hoses from the calipers.

Remove the caliper retaining brackets from the hub assemblies (2 large bolts on backside of the bracket)

Tap the brake rotors off of the hubs, hit them from the back side of the rotor.

No big mysteries here, this is a very easy job.

Posted on Oct 21, 2008

  • 65 Answers

SOURCE: How to I replace the oil filter on a 2009 Toyota Camry V6 engine?

Under the engine in the front you will see an aluminum cover.There is a square hole that fits a 3/8 ratchet remove this first.The new filter comes with a drain adapter that snaps in the hole under the cover.This lets the oil in the housing drain.Then take a oil filter cup wrench or a big channel lock to twist of the larger portion.Then change the filter and o-ring and reinstall.Make sure the o-ring on the square drive cover is there also

Posted on Nov 30, 2008

gforce3s
  • 31 Answers

SOURCE: 2003 toyota corolla engine oil capacity

4.2 litres with filter.

Posted on Dec 12, 2008

  • 1 Answer

SOURCE: how to reset 2006 toyota sequoia after change oil

Previous Post dead wrong...

Turn ignition to "ON" position. Make sure odometer is on trip setting not on total vehicle mileage setting.

Turn ignition OFF

Push and hold odometer button while turning ignition to "ON" position. HOld for about 4-5 seconds until maintenance light goes off. Turn ignition OFF. Start up vehicle. There should be no more maintanence light.

Posted on Jun 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Engine oil capacity for 1998 toyota camry csi


I'm pretty sure that it is 4 quarts with a filter change. That is for the regular 4 cyl 2.2L engine.

Jun 03, 2014 | 1998 Toyota Camry

2 Answers

1992 Toyota Camry V6 how many litres oil


Can't give you an exact number but I can tell you how to find out. I will asume that you are changing you oil and filter? After putting the oil plug and filter on put three quarts of oil in and start engine; after oil light goes off, turn engine off and let set for about 5 minutes, then check oil; if it is not on the low mark of dip stick add another quart, start engine, stop engine, let set for a couple of minutes and check again. By now you should either be at or above the low line and just add enough oil to top it off at the full line. I would guess that about 4 1/2 to 5 quarts is what you will need. Hope this helps,
P. Ford

Jan 10, 2013 | 1992 Toyota Camry V6

1 Answer

How many quarts of oil will I need for my 1998 Toyota Camry 2.2 litre


you only need about 4 liters of engine oil..every sedan car only needs 4 liters of engine oil during change oil

Jul 24, 2012 | 1998 Toyota Camry

1 Answer

I have to add oil about 2 litres on 8000km to my 2003 Toyota Camry with 160,000 km, it's a 4 cylinder, does not leak oil and doesn't burn oil. Any suggestion, I have change the PVC valve, did not...


its not leaking but is probably burning it,the milage is fairly high so there is probably wear on the rings and valve guides, using two litres between oill changes is not that much in reality, the only cure is to have the engine rebuilt, your best bet is to live with it

Jul 30, 2011 | 2003 Toyota Camry

1 Answer

2004 toyota camry maintanance req light on


Youll need a oil change that is a oil change light it is proper for maintance and the life of the engine and be sure to reset it. just for laughs here is how to reset it. push odo till "A" odo appears turn key to off while you hold odo reset, at the same time turn key on to ACC position (engine not running) hold and youll see oil life flash and blink when the line disapears its done and it is reseted

Apr 23, 2011 | 2004 Toyota Camry

1 Answer

I changed my camry 2004 engine oil and filter and after driving for about 500km the maintenance required light came on. What is the cause please


You need to reset the maintenance reminder manually after you change the oil. You can do this by holding in the trip reset button and turning the key to the run position. keep holding the button down. the odometer should switch to all dashes and then the dashes will start to disapear. once there all gone it has been reset. Sometimes the trip odometer needs to be on a sometimes it needs to be on b. Your owners manual will have further instructions if you need then.

Sep 27, 2010 | 2004 Toyota Camry Solara

1 Answer

The check engine light on my 2004 Toyota Camry came on suddenly one day while pulling into traffic, then car locked up as if it were in neutral, lost all power, and I had to pull to side of road. Turned it...


i have 340 000 kms on my 2000 toyota echo it has had that light on for arond 150,000 I just ignore it car runs fine if your mechanic seems to think it is ok you can do what i do or spend money at a toyota dealership and let them tell you and also reset it

Dec 21, 2009 | 2004 Toyota Camry

1 Answer

2007 Camry


have the oil changed and then ...

with the ignition key on engine off, set trip meter to TRIP A , turn key off , now press and hold the trip button and turn the ignition key to the on position -engine off , hold until odometer reads 000000 , and light is reset .
its just an oil change due reminder .

J5

Jan 15, 2009 | 2007 Toyota Camry

1 Answer

2004 toyoat camry Engine Maint. light


hello frcs68 , to reset the light , turn key off , press and hold the trip meter knob , turn the key to on , engine off , continue to hold it till it flashes , - - - - - , - - - - . - - - , - - , - , - - - - - , it looks like that , then its reset . hope that fix ya

Jan 03, 2009 | 2004 Toyota Camry

Not finding what you are looking for?
2004 Toyota Camry Logo

Related Topics:

303 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...