Question about Ford F-250

Open Question

Need intructions to replace clutch on a 1989 Fordd F250 4X4 7.3 diesel

Any diagrams and step by step instructions will help. I've never done a clutch before

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: 2000 ford f250 super duty 4x4 7.3L diesel oil leak

The HPOP (high pressure oil pump) is right under the filter housing. There are 2 lines that distribute the oil to the cylinder heads. The o-rings on those fittings go out. Kit is available from Ford or International. You will need a special wrench to get to the fittings though.

Posted on Jun 23, 2008

michigan man
  • 3533 Answers

SOURCE: 1989 Ford F150 power window

you have to disconnect the negative side of the battery so you won't kill it then remove the door panel look for hidden screws behind the arm rest and behind what looks like little doors that you have to use a screw driver to open once that is removed you will find a plastic sheet just cut and peel this back (you can use duct tape to replace it when you are done) also put on gloves because inside the doors there is sharp edges, you then can see the motor and you will need to break off the rivets but you can put the new one on with just a small bolt and nut and use lock tight

Posted on Jan 06, 2009

hotrodtod38
  • 141 Answers

SOURCE: need to replace front rotors on 1996 f250 4x4

ITS MAY BE POSSIBLE TO GET IT FROM AUTOZONE.COM GOOD LUCK

Posted on Feb 14, 2009

SUPERMAN_B_1
  • 294 Answers

SOURCE: REPLACING LOWER BALL JOINTS ON 2000 FORD F250 4X4 7.3L DIESEL

hello,yes you do have to take the hub off to replace the ball joint with the ball joint being on the back side of the hub. hope this helps and please rate this.

Posted on Mar 15, 2009

landsend
  • 1066 Answers

SOURCE: 1997 Clutch Replacement Diagram

public library...Chilton or Haynes auto repair manuals or collisionrepairadvice.com

Posted on Apr 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can I find a diagram for replacing a clutch slave cylinder


Hi Chris:
Odds are that the appropriate Haynes Manual would not only have the diagram, but also all of the step by step instructions.

Jan 13, 2016 | 1988 GMC S-15

1 Answer

1989 Subaru DL wagon clutch replacement procedure


engine needs to be removed (not as bad as it sounds)

Apr 04, 2013 | Subaru Cars & Trucks

2 Answers

I replaced the clutch master cylinder and the braided brake line in a 2000 camaro ss and I'm trying to bleed the system. I know how to do it but I've done the procedure 20 times and there is still no


You may have got a bad master cylinder.It happened to me before.I had to get 3 of them before i got a good one.Mine was on a full size jeep though.

Mar 21, 2013 | Cars & Trucks

1 Answer

Need help changing the clutch in a 1990 Subaru Justy GL 4wd


I have been unable to find specific instructions for this model due to the age of it. You can pay for the info here or buy a used repair manual here.

Oct 18, 2012 | Subaru Justy Cars & Trucks

1 Answer

I have bought Skoda Fabia 1.2 TDI, has done 20000 kms, however the clutch is so hard, that my leg has started paining, i have shown this to service center, they claim that its a hydraulic clutch and...


this case you must replace presure plate (a part of clutch ) it's small engine diesel or gasoline the clutch disc is small it means easy to press. try check anther car .if the vehicle parking for long time in stock , some time this case happen . and the hydraulic means easy if it's cable mybe it's hard . you must replace presure plate .

Jul 30, 2011 | Volkswagen Polo Cars & Trucks

1 Answer

NEED TIMING MARK DIAGRAM FOR 1989 GOLF 1.6 DIESEL TO REPLACE TIMING BELT


The timing belt marks diagram for 1989 VW Golf 1.6 Diesel

tdisline_534.jpg
tdisline_535.jpg

May 15, 2011 | 1989 Volkswagen Golf

1 Answer

How do you remove or drop down the tilt steering column on a 1989 F250 4x4 7.3 diesel? I'm trying to replace the clutch and brake peddle support pivot bracket that is broken. I've gotten the bracket...


this is for 1996, don't have 89.
these may be steps you need



  1. Remove pinch bolt from steering shaft flex coupling.
  1. Disconnect shift cable from selector lever pivot.
  1. Remove shift cable from steering column lower mounting bracket by pushing tab on cable in and sliding cable off bracket.
  1. Disconnect ignition switch (11572) by loosening bolt and removing connector. The bolt is part of connector and can not be removed.
  1. While supporting steering column, remove four retaining nuts.
  1. Disconnect collapsible intermediate shaft from U-joint at lower end of steering column.
  1. Remove steering column from vehicle.
8e2a7cb.gif

Oct 29, 2009 | 1989 Ford F 250

2 Answers

1989 jeep cherokee 4.0 cuts without warning or when you let off gas pedal


check the crank position sensor and the throttle position sensor

Oct 15, 2009 | 1989 Jeep Cherokee

1 Answer

Need to know how to repair clutch in my tyota


get an auto repair manual it will give you step by step instructions of how to do this. anyauto parts store have them or Ebay under car repair manuals

Jul 11, 2009 | 1989 Toyota Corolla 2 Door

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...