01 saturn i200 odometer switched to Km from Miles

There is no fuse for just the odometer, has main fuses for the whole instrument cluster . Odometer not working? instrument cluster problem. Have it checked by a professional repair shop.

Odometers
Each instrument panel cluster (IPC) is equipped with a season odometer and 2 trip odometers. The IPC uses the odometer rolling count message from the powertrain control module (PCM). The rolling count value is determined by counting the speed pulses from the vehicle speed signal (VSS). The IPC uses the rolling count data from the PCM and a software program to determine vehicle mileage. The odometers can be displayed in miles or kilometers. The units displayed is switched between English and metric by pressing the menu button on the driver information center (DIC) until the units mode is displayed. Pressing the set/reset button will select between English or Metric. . When the set/reset button is pressed to show the odometer in metric, km and the number will be displayed. When the odometer is in English, MI and the number will be displayed.


Season Odometer
The season odometer displays the total accumulated miles or kilometers of the vehicle. This value is permanently stored in the IPC. If an odometer malfunction occurs or if the IPC must be replaced, an authorized Delco service center must be contacted to program proper vehicle specifics, including mileage, for the IPC. The season odometer is capable of displaying 999,999 kilometers or 999,999 miles depending on units selected. Leading zeros are not displayed. The display will not roll-over to 000,000 if the maximum displayed miles or kilometers are reached. If the display limit is exceeded, the maximum value (999,999) is displayed. If the mileage is above 621,503 miles and metric units are selected the odometer shall display 999,999 km.


Circuit/System Testing
Ignition OFF, raise the vehicles drive wheels.
Engine ON, transmission in drive, verify the scan tool Vehicle Speed Sensor parameter matches the speedometer display.
? If the Vehicle Speed Sensor parameter does not match the speedometer display, replace the IPC.
Verify that the odometer is operating properly.
? If the odometer is not operating properly, replace the IPC.

possible but i have no idea how to reset it sorry ,look in handbook or do what i do and thats get one of the grandkids to do it

Here is an example of miles to kilometers

mi -> kmkm = mi * 1.6093km = 107.098 * 1.6093km = 172.36
or kilometers to miles
km -> mimi = km _______ 1.6093mi = 107.098 ________ 1.6093mi = 66.548

Have you changed the size of the tires ?
If not, the speed sensor or the odometer could be faulty.

i can tell you this was a very common problem on the 91-94 S series instrument cluster, so common that an odometer repair kit was sold on eBay for just a few bucks. so you could go look at eBay and see if there is an odometer repair kit for the 00 & 01 S series as I think they were not made after 01 and the 95-99 clusters were different. A search on www.youtube.com always turns up interesting Saturn repair videos.

Scheduled Maintenance The service shown in this schedule up to 150,000 miles (250,000 km) should be performed after 150,000 miles (250,000 km) at the same intervals.
See Owner Inspections and Services for maintenance information.
Scheduled Maintenance Mileage
Maintenance Group No.
6,000 Miles (10 000 km)
1
18,000 Miles (30 000 km)
2
30,000 Miles (50 000 km)
3
36,000 Miles (60 000 km)
4
42,000 Miles (70 000 km)
1
50,000 Miles (83 000 km)
5
54,000 Miles (90 000 km)
2
60,000 Miles (100 000 km)
6
66,000 Miles (110 000 km)
1
72,000 Miles (120 000 km)
4
78,000 Miles (130 000 km)
1
90,000 Miles (150 000 km)
7
100,000 Miles (166 000 km)
8
102,000 Miles (170 000 km)
1
108,000 Miles (174 000 km)
4
114,000 Miles (190 000 km)
1
120,000 Miles (200 000 km)
6
126,000 Miles (210 000 km)
2
138,000 Miles (230 000 km)
1
150,000 Miles (250 000 km)
5
Maintenance Requirements - Group 1 • Rotate the tires. See Tire Inspection and Rotation for the proper rotation pattern and additional information. • Inspect the brake system. Check the brake calipers for freedom of movement and lubricate if required. • Inspect the exhaust system and shields. • Lubricate the door hinges, check links, hood and sunroof (if equipped). Maintenance Requirements - Group 2 • Rotate the tires. See Tire Inspection and Rotation for the proper rotation pattern and additional information. • Inspect the brake system. Check the brake calipers for freedom of movement and lubricate if required. • Inspect the exhaust system and shields. • Lubricate the door hinges, check links, hood and sunroof (if equipped). • Inspect the engine accessory drive belt and coolant hoses every 12 months or 18,000 miles (30,000 km), whichever occurs first. Maintenance Requirements - Group 3 • Rotate the tires. See Tire Inspection and Rotation for the proper rotation pattern and additional information. • Inspect the brake system. Check the brake calipers for freedom of movement and lubricate if required. • Inspect the exhaust system and shields. • Lubricate the door hinges, check links, hood and sunroof (if equipped). • Replace the engine air cleaner filter every 36 months or 30,000 mile (50,000 km), whichever occurs first. An Emission Control Service . (See footnote) • Inspect the vacuum lines/hoses every 24 months or 30,000 mile (50,000 km), whichever occurs first. An Emission Control Service . (See footnote) • Replace spark plugs. An Emission Control Service.

there should be a button on the dash or under the speedometer

the bcm,body control module counts the miles and sends it to the ipc Cluster so if its not counting miles the bcm is bad,common issue takes it oto dealer $400 ish

Problem is in the guage cluster assy.The ODO is mechanical,serviced by replacing guage cluster.

okay,for one,the odometer doesnt read in miles per hr,it reads miles driven, and two i have no idea if its possible to change the odometer to km traveled,if you're talking about the speedometer,its already there,get a european cluster :p