Question about Cadillac CTS

1 Answer

Hazard stop flashing after 1 minute and stays on

Turn on Hazard lights and after about a minute it stops flashing and just stays on steady... Even the green indicator lights in the dashboard stop blinking... Is this caused from a relay or signal box???

Posted by on

  • 1 more comment 
  • Steve Joseph Feb 17, 2012

    Does anyone know where the hazard relay is located for my 2004 Cadillac CTS???

  • Steve Joseph Feb 18, 2012

    Went to autozone and they said it's called a lighting control module and not a relay box... Does this control module needs programming???

  • Steve Joseph Feb 21, 2012

    Just to add that the indicator (blinker) was also affected.... I did change the lighting control module and that fixed the problem... That's a bunch guys...

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 3 Answers

Yes, I replaced the relay box and it worked.

Posted on Feb 17, 2012

Testimonial: "Thank you... That was a fast response... Is this relay in the engine compartment and is it a do it yourself project..."

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: Front signal light Turn on but do not blink

try some electric contact lube in the light socket the leads may be corroded

Posted on Nov 28, 2008

  • 99 Answers

SOURCE: turn signals don't work

you should have a flasher for the turn signals as well as one for the hazard flashers turn signal flasher can be in fuse box on drivers side or mounted to steering column

Posted on Nov 30, 2008

  • 3 Answers

SOURCE: 2004 F150- Hazard Flashers dont work, turn signals do work

try replacing the hazard relay it should be under the dash try turning it on and off with your head down by the floorboard to pinpoint the right relay and the location. you should be able to hear it easily. hope this helps.

Posted on Dec 04, 2008

motor1258
  • 6674 Answers

SOURCE: 1993 Dodge Shadow...left turn signal won't flash

If you have trouble finding signal flasher, turn your right side blinker on, and follow clicking noise to flasher.

Posted on Apr 13, 2009

  • 10 Answers

SOURCE: None of the turn signals work, the turn signal indicator in dashboard doesn't work either

I buddy I got the same problem because I did a bit of offroad with the car and the hazard cable unplog from the button then all the signal won't work just pull the air and radio holder then check if the cable still fix

Posted on May 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why do my hazard lights stop after just a few seconds?


Sounds like the flasher unit is failing. Some vehicles have seperate flashers for t/sigs and hazards. Your local parts store should be able to look it up

Mar 17, 2015 | Cars & Trucks

1 Answer

Kia hazard lights stay lashing even when the vehicle is not running and wont stop flashing


Has the HAZARD switch been activated? If the switch is off then there may be a problem with the switch or the flasher module.

Feb 20, 2015 | 2014 Kia Sorento

1 Answer

Turn signal and Hazzards issue


Turn signal flasher. Replace with a heavy duty one.

Mar 20, 2014 | 2001 Jeep Cherokee

1 Answer

Left front turn signal does not flash. Left rear OK. socket was corroded so I replaced socket. No flash. Checked wires for voltage, only the parking light connection ever gets anything. Front and rear...


Try pushing the Hazard switch on the Column several times and see if it restores the connection. From what I understand about the Multifunction Turn switch is that some of the contacts share connections with the Hazard Button.

The contacts work on a type of derailer setup and when the contacts get dirty or wear, things stop working. Moving the Hazard switch resets the points and springs each time you go in and out of the Hazard setting.

If your brake light is working you know the wires to the light socket from the brake switch are okay. Probably would not hurt to check brake light switch as it shares the common wire. The split between the left turn and right turn signal wire has to occur, yet the opposite brake light will stay on steady while the other side blinks.

Oct 22, 2010 | Ford E-250 Cars & Trucks

1 Answer

Stop and TS problem


there is a flasher
.the hazard is wired to constant power so it works with the ignition off.
the turn signal works off of a switched power,to the turn switch and either the right or left turn signal.
if a bulb burns out,the light stays on steady

Jan 29, 2010 | 1998 Mercury Grand Marquis

1 Answer

2001 Prelude hazard lights come on while driving


you can remove the flasher unit as a temp fix

Jan 10, 2010 | 2001 Honda Prelude

1 Answer

I have a 2002 chevy silverado 1500 it seem that it is not getting fule it will not stay running and will start for a second but then stop when I try to give it gas or not give it gas I think it is the fule...


sounds like the security system is malfunctioning. When you turn the key on does the security light stay on steady or flash? If flashing leave the key on for about fifteen minutes till it stays on steady. the engine should then start. if it does not go steady, likely you need to replace the ignition key switch assembly.

Sep 10, 2009 | Chevrolet 1500 Cars & Trucks

1 Answer

Hazard lights wont stop flashing and car wont turn over.


unlock driver door twice consecutively because that's how u disarm the car alarm.As for the radio, input the code that's in ur booklet. If u don't have it, call ur local dealer with the car's serial number and they will give u the radio code. It's 4 digits.

Jan 31, 2009 | 1996 Volkswagen Jetta

1 Answer

My hazard lights and turn signals stopped flashing


i bet you have a bad multi function switch or turn sig switch. good luck

Oct 25, 2008 | 2006 Dodge Ram 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

362 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...