Question about 1990 Ford Econoline

1 Answer

No 12V to the fuel pump

I removed the electric fuel pump ouput and no fuel out. Removed the fuel Pump and attached to 12V and it ran fine. Checked 12V to the Fuel Pump and no 12V even when trying to start the engine

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 5,370 Answers

For fuel related problem,the help links are provided below.
Click the link below to go through its procedure:----

How to relieve fuel pressure?
http://technoanswers.blogspot.com/2012/01/how-to-relieve-fuel-pressure.html
--------
Refueling problem?
http://repairhelpcenter.blogspot.com/2012/01/refueling-problem.html
--------
Car consuming more fuel?
http://repairhelpcenter.blogspot.com/2012/01/toyota-tercel-consuming-more-fuel.html
----------
How to maximize fuel economy on your vehicle?
http://schematicsdiagram.blogspot.com/2011/11/how-to-maximize-fuel-economy-on-your.html
-------
Fuel pump relay troubleshooting ?
http://repairhelpcenter.blogspot.com/2011/10/fuel-pump-relay-and-cooling-fan-relay.html
------------
How to Increase gas mileage vehicle?
http://schematicsdiagram.blogspot.com/2011/12/how-to-increase-gas-mileage-on-2011.html
---------
How to Test and Replace Fuel Injectors?
http://repairhelpcenter.blogspot.com/2011/11/how-to-test-and-replace-fuel-injectors.html
-------------------
How to replace Fuel Tank Assembly?
http://vwrepairhelp.blogspot.com/2011/11/how-to-replace-fuel-tank-assembly.html
--------------
FUEL LINES AND FITTINGS ?
http://repairhelpcenter.blogspot.com/2011/11/fuel-lines-and-fittings-on-acura-car.html
------------
Replacing Fuel Charging Assembly on Car?
http://vwrepairhelp.blogspot.com/2011/11/replacing-fuel-charging-assembly-on-car.html
------------
How to replace Fuel Pressure Regulator ?
http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-fuel-pressure-regulator.html
---------------
How to test Fuel Pressure and replace Fuel Pump?
http://repairhelpcenter.blogspot.com/2011/11/how-to-test-fuel-pressure-and-replace.html
--------------
Car will not take fuel into the fuel tank?
http://repairhelpcenter.blogspot.com/2012/01/car-will-not-take-fuel-into-fuel-tank.html
--------------
PGM-FI Main Relay location?
http://repairhelpcenter.blogspot.com/2011/11/pgm-fi-main-relay-on-acura-car-models.html
------------------
How to Relieve Fuel System Pressure on Car Models?
http://repairhelpcenter.blogspot.com/2011/11/how-to-relieve-fuel-system-pressure-on.html
-----------------
How to Replace a Fuel Injector
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-fuel-injector.html
----------------
How to Replace a Fuel Pressure Regulator?
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-fuel-pressure-regulator.html
-------------
How to Replace a Fuel Pump?
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-fuel-pump.html
-------------------
HOW TO CLEAN A FUEL SYSTEM
http://schematicsdiagram.blogspot.com/2011/07/how-to-clean-fuel-system.html
-----------
HOW TO REPLACE A FUEL TANK
http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-fuel-tank.html
--------------
HOW TO REPLACE A FUEL TANK CAP
http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-fuel-tank-cap.html
------------
HOW TO REPLACE A FUEL PUMP ASSEMBLY
http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-fuel-pump-assembly.html
-----------
How to change fuel injector on gmc ?
http://schematicsdiagram.blogspot.in/2012/03/how-to-change-fuel-injector-on-2005-gmc.html
------------
Time to replace Fuel pump?
http://schematicsdiagram.blogspot.com/2011/12/time-to-replace-fuel-pump-on-1998-ford.html
-----------
Emergency fuel shut switch location?
http://schematicsdiagram.blogspot.com/2011/12/emergency-fuel-shut-switch-on-ford-car.html
---------------
How to jump fuel pump?
http://schematicsdiagram.blogspot.com/2011/12/how-to-jump-fuel-pump-on-chevrolet.html
------------
Car wont start when cold?
http://schematicsdiagram.blogspot.com/2011/12/car-wont-start-when-cold.html
--------
Car wont start after sitting overnight?
http://schematicsdiagram.blogspot.com/2011/12/car-wont-start-after-sitting-overnight.html
---------
Car loses power while acceleration?
http://schematicsdiagram.blogspot.com/2011/12/car-loses-power-while-acceleration.html
------------
Fuel leaks from fuel pulsation dampener?
http://repairhelpcenter.blogspot.com/2012/01/fuel-leaks-from-fuel-pulsation-dampener.html
----------
Car will not allow to put fuel?
http://repairhelpcenter.blogspot.com/2012/01/car-will-not-allow-to-put-fuel.html
-----------
Adding performance chip to increase Fuel mileage MPG?
http://technoanswers.blogspot.com/2012/01/adding-performance-chip-to-increase.html
--------------
How to test Electric fuel pump?
http://technoanswers.blogspot.com/2012/01/how-to-test-electric-fuel-pump-on-gmc.html
---------
Fuel gauge drops to Empty?
http://technoanswers.blogspot.com/2012/01/fuel-gauge-drops-to-empty.html
-----------
Fuel pump not working on Ford?
http://technoanswers.blogspot.in/2012/01/fuel-pump-not-working-on-1991-ford.html
--------------
Fuel pump has no power on ford diesel?
http://technoanswers.blogspot.in/2012/01/fuel-pump-has-no-power-on-2002-ford-350.html
------------
Pushing on the gas pedal but the car slows down? Gas pedal to the floor and the car slows down?
http://technoanswers.blogspot.in/2012/02/pushing-on-gas-pedal-but-car-slows-down.html

---------
Ford Fuel pump Relay and fuse location diagram?
http://technoanswers.blogspot.in/2012/02/ford-fuel-pump-relay-and-fuse-location.html

--------
Ford inside fuse box diagram showing fuel pump relay?
http://technoanswers.blogspot.in/2012/02/ford-inside-fuse-box-diagram-showing.html
---------------
Ford fuel pump fuse layout diagram?
http://technoanswers.blogspot.in/2012/02/ford-fuel-pump-fuse-layout-diagram.html
--------------
How to lower fuel pressure on Toyota?
http://schematicsdiagram.blogspot.in/2012/02/how-to-lower-fuel-pressure-on-toyota.html

------------
Fuel pump not running?
http://schematicsdiagram.blogspot.in/2012/02/fuel-pump-not-running.html
--------------
How to replace fuel filter on BMW?http://schematicsdiagram.blogspot.in/2012/03/how-to-replace-fuel-filter-on-bmw-525i.html
----------

This will help.
Thanks.

Posted on Mar 02, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: 92 ford ranger

check your vacuum lines if one is off then it will do that too.

Posted on Jun 29, 2008

  • 651 Answers

SOURCE: 1999 Ford Expedition won't start

it should be under the dash near the brake peddle, also a relay fuse under the hood. the fuel filter might have clogged up also. but you should be able to hear a faint whirring sound if the pump is working.

Posted on Dec 01, 2008

michigan man
  • 3533 Answers

SOURCE: 92 mustang reset switch electric fuel pump where located

on the mustangs i have the switch in just inside the rear hatch on the right side a yellow button you may have to remove a small cover to see it

Posted on Apr 27, 2009

  • 77 Answers

SOURCE: 2004 ford f150 wont start.take fuel pump out and jumped it ,it wo

fuel pump relay, or the simplest solution check the fuse block to see if you have a blown fuse. Most likely its the relay, but check the fuse block, under the dash and under the hood, maybe you'll get lucky. Good Luck.

Posted on Jun 21, 2009

  • 5546 Answers

SOURCE: ford explorer eec relay

Try a new relay first. This may not be good news if that does not work. If you can find the EEC (computer) and unplug it, then replace the fuse-if it blows you have another cheaper part on the circuit thats bad.
If the fuse does not blow, then the EEC must be shorted.
If you have to replace the EEC you may find a kindly dealer with a cash-for-clunker sitting there to violate. Salvage yards have them, Ebay sells them. I have seen them at swap meets for $20. They are a high price part even rebuilt at Dealers or autoparts stores.

Posted on Aug 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trying to figure out fuel pump. will not energize when ignition is on. Fuel sending unit works fine but will not deliver fuel.


unknown vehicle so generic answer check and test relay --also check the connectors for corrosion-and ground connections

Jun 25, 2017 | Cars & Trucks

1 Answer

2004 Mazda Bravo 2.6 efi


sounds like a blown head gasket or your engines locked up

Feb 16, 2014 | Mazda Cars & Trucks

1 Answer

Not getting fuel from tank to engien, checked lines thats not the problem, hooked up a electrical fuel pump and it ran fine. and yes it does have gas.


it could be the pump or the pump relay. relay is most come to go with the age but same as the pump if it has never been replaced in the past.

Jun 26, 2017 | 1990 Volkswagen Cabriolet

1 Answer

Replace fuel pump 1993 mazda 323



REMOVAL & INSTALLATION

323, Protege, 520-22 626 and MX-6 and 522-24 MX-3 Models
See Figures 1 and 2

  1. Relieve the fuel pressure and disconnect the negative battery cable.
  2. If not already removed, depress the clips on each end of the rear seat cushion and remove the cushion.



0900c152802612b0.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 1: Detach the fuel hoses and electrical connections from the fuel pump, then remove the attaching screws and the pump


0900c152802612b1.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 2: Exploded view of the fuel pump assembly for the 323, Protege, 520-22 626, MX-6 and 522-24 MX-3

  1. If not already done, detach the electrical connector from the fuel pump/sending unit.
  2. Remove the attaching screws from the fuel pump/sending unit access cover and remove the cover.
  3. Disconnect the fuel supply and return hoses from the fuel pump/sending unit.
  4. Remove the attaching screws and the fuel pump/sending unit from the fuel tank.
  5. Detach the sending unit electrical connector, remove the sending unit attaching nuts and remove the sending unit from the fuel pump assembly.

To install:
  1. Attach the sending unit to the fuel pump assembly and install the nuts. attach the sending unit electrical connector.
  2. Install the fuel pump/sending unit into the fuel tank with a new gasket and install the mounting screws.
  3. Connect the fuel supply and return lines.
  4. Install the access cover and the mounting screws.
  5. Attach the sending unit electrical connector.
  6. Position the rear seat cushion over the floor, making sure to align the retaining pins with the clips. Push down firmly until the two retaining pins are locked into the rear seat retaining clips.
  7. Connect the negative battery cable, start the engine and check for proper system operation and for fuel leaks.

May 08, 2012 | 1993 Mazda 323

1 Answer

I have a 1997 isuzu rodeo 3.2L I've checked the continuity on the fuel pump wires they seem fine. No/low voltage on the wires to the pump, (.08 volts when DMM is set to 20). Checked pump after removing the...


You may want to try to see if the car will start while you spray starting fluid down the throttle body. If it doesn't, the problem may not be the fuel pump at all. There is an idle air control valve bolted to the front of the throttle body that can keep the car from starting as well.

If the car starts with the starting fluid, you might want to change your fuel filter. It's mounted under the car near the passenger rear door.

Mar 06, 2011 | 1997 Isuzu Rodeo

1 Answer

How do i replace the fuel pump in my 1993 mazda 626 2.5


1. Relieve the fuel pressure and disconnect the negative battery cable.

2. If not already removed, depress the clips on each end of the rear seat cushion and remove the cushion.

3. If not already done, detach the electrical connector from the fuel pump/sending unit.

4. Remove the attaching screws from the fuel pump/sending unit access cover and remove the cover.

5. Disconnect the fuel supply and return hoses from the fuel pump/sending unit.

6. Remove the attaching screws and the fuel pump/sending unit from the fuel tank.

7. Detach the sending unit electrical connector, remove the sending unit attaching nuts and remove the sending unit from the fuel pump assembly.



To install:

1. Attach the sending unit to the fuel pump assembly and install the nuts. attach the sending unit electrical connector.

2. Install the fuel pump/sending unit into the fuel tank with a new gasket and install the mounting screws.

3. Connect the fuel supply and return lines.

4. Install the access cover and the mounting screws.

5. Attach the sending unit electrical connector.

6. Position the rear seat cushion over the floor, making sure to align the retaining pins with the clips. Push down firmly until the two retaining pins are locked into the rear seat retaining clips.

7. Connect the negative battery cable, start the engine and check for proper system operation and for fuel leaks.

Jun 13, 2009 | 1993 Mazda 626

1 Answer

94 Integra Won't Start


If the pump blew the fuses then the pump or the wiring to it inside the gas tank is shorted.

Jul 11, 2017 | 1994 Acura Integra

Not finding what you are looking for?
1990 Ford Econoline Logo

553 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...