Question about 1997 Toyota Camry

Open Question

Where do i start to fix a p0135 code on my toyota camry 1997

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1861 Answers

SOURCE: 1997 Camry Valve Cover Gasket Replacement

Removal of the plenum is pretty straight forward. You will need to replace the plenum gasket after you remove it; the gasket is not reusable. Personally, if I was going to take the trouble to remove the plenum, I would replace the plugs and wires back there, also.
I know, I have a 93 Camry V6, and it is a real pain to do the plugs and wires with the plenum on. There are no secrets or great tips on the plenum removal, just take your time. Remember that there are different size bolts, and where they go. Please get back to me if you need any more info...Hope this helps, and thanks for choosing FixYa to resolve your issue.
The graciousness of a FixYa rating for my assistance would be greatly appreciated.

Posted on Dec 15, 2008

motor1258
  • 6674 Answers

SOURCE: OBD code 0401 (1997 Toyota Camry 4 cyl)

There is a VSV (vacuum switching valve) , usually mounted on the back side of engine block, under the intake manifold, as well as the map sensor, that can also cause that code if one or the other is faulty. It takes some pretty detailed troubleshooting to confirm this in some cases, so if that's not in your line of work, you may have to have it properly diagnosed, or take a 50/50 shot at which one first.

Posted on Jan 24, 2009

awcforever
  • 359 Answers

SOURCE: toyota camry 1997 3.0 v-6 code p0446

That code is for the evaporative emmisions system. Here is a link to an open forum you can go to, this will help you understand what it is, and why. The vehicle on the site is a van, but the code, and parts involved are one in the same, so don't worry about the difference in vehicle. The van is a toyota, and this is the information on the p0446 code. Hope this helps you.
http://steampunkworkshop.com/toyota-sienna-evaporative-canister-and-svs-valve-repair

Posted on Mar 08, 2009

c17hydro
  • 2984 Answers

SOURCE: 1997 toyota camry check engine light on,code po440,po420,po441,

P0420 is catalyst system efficiency below threshold (bank 1)

P0440 is evaporative emission control system malfunction

P0441 is evaporative emission control system incorrect purge flow

Posted on Mar 29, 2009

mecanica03
  • 874 Answers

SOURCE: 1997 Toyota Camry code P0171

ita a little black box with 5 wires plug, between air filter and throttle, but try to reset maybe was a momentany failure,disconnect the negative battery terminal few minutes

Posted on Apr 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P0402 1997 Toyota Camry 4 cyclinder 4 door, encountered P0402 has 3 months already. The car is drivable. What is the solution? Could replacement of a vsv value resolve this issue? Which part can I buy


Hi,
That is the code for Exhaust Gas Recirculation Flow (EGR) Excessive Detected

Read more at: http://www.obd-codes.com/p0402
Copyright OBD-Codes.com

Go to the site and review what causes and can be checked to fix it.

I'd start w/cleaning the EGR valve - free fix - and then consider replacing the part. I'd look for USED parts @ a local Salvage/Wrecking yard vs. buying new, due the cost and the fact that this is an older car.

GL,
TD

Mar 14, 2014 | Toyota Cars & Trucks

1 Answer

Please GeoffW1 this are the fualt code diagnose from my toyota camry 1999 model v6 engine FAULT NUMBERS- 1.( p0110 ) 2.( p0135) 3.(p0450) 4.( p1410) 5.(P1411) please i need their locations and...


Sorry, I never noticed this post, for some reason I did not get an email from Fixya. If it is not too late..........
p0110 is the Intake Air Temp sensor or its wiring connector at fault. This is located at the side of the air cleaner housing.
p0135 is a fault in the No 1 oxygen sensor in bank 1, or its wiring connector. This thing is located in the exhaust manifold under the sheet metal shield at the front of the engine
p0450 is an evaporative emission system pressure sensor fault. Many people recommend replacing the fuel filler cap gasket before going further with this one

http://repairpal.com/OBD-II-Code-P0450



p1410 and p1411 indicate an EGR valve malfunction, and it may be enough to simply clean and check it, located on the engine next to the firewall. Also check the vacuum modulator and Vacuum Switch Valve, as shown here p46, 146, 152, 190


http://www.turboninjas.com/camry/eg1.pdf

Nov 15, 2012 | 1999 Toyota Camry

2 Answers

What code mean po302,,,,po135...p1705


P0302 TOYOTA - Cylinder 2 Misfire Detectedxicon.jpghttp://engine-codes.com/p0302_toyota.htmlForum CodePossible causes- Faulty spark plug 2
- Faulty ignition coil 2
- Ignition coil 2 harness is open or shorted
- Ignition coil 2 poor electrical connection
- Clogged or faulty fuel injector 2
- Injector 2 harness is open or shorted
- Injector 2 poor electrical connection
- Improper spark plug 2
- Insufficient cylinder 2 compression
- Incorrect fuel pressure
- Intake air leak
P0135 - O2 Sensor Heater Circuit Malfunction Bank 1 Sensor 1xicon.jpghttp://engine-codes.com/p0135.htmlForum CodePossible causes- Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1 circuit
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1 circuit open shorted to ground
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1 circuit poor electrical connection
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1 circuit fuse
- Faulty Engine Control Module (ECM)
Tech notes The code means that there is a problem with the heater element circuit of the heated oxygen sensor. The Engine Control Module (ECM) monitors how long it take the sensor to warm up and start sending an adequate signal. The code means the the sensor is taking too long to warm up. Replacing the O2 Sensor 1 usually takes care of the problem
P1705 TOYOTA - Direct Clutch Speed Sensor Circuit Fault.
This is related to the sensor that gives info about the slippage rate o fthe transmisssion to the Transmission Control Module..

Jul 15, 2012 | 1996 Toyota Camry

2 Answers

Check engine lite comes back on


I had the same problem on a 03 Avalon. It is the connector that comes with the "generic" sensor you bought. It tests fine, but the computer somehow sees the resistance in the connector. I even cut it out and soldered the connections, still no luck. Took car to a local shop and they said they had the same issue with generic sensors and quit using them. Bought the Bosch sensor with the factory plug (best price is on amazon.com) and problem solved.

Jul 06, 2009 | 1997 Toyota Camry

2 Answers

1997 toyota camry check engine light on codes are po441,po446


p0446 is an evap code for incorrect purge flow, check the rear vacume switching valve. its above the rear sub frame

Apr 05, 2009 | 1997 Toyota Camry

Not finding what you are looking for?
1997 Toyota Camry Logo

Related Topics:

271 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...