Question about 1988 Acura Legend

1 Answer

Removal of the driver seat of my 1988 acura legend

Trying to remove the driver seat of my 1988 acura legend

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 104 Answers

I'm not certain of the layout of the bolts on your particular model, but there should be 4 bolts, one at each end of the seat tracks (the things the seat slides back and forth on), attaching the tracks to the floor. You may need to slide the seat back to access the front bolts, and forward again to get the back ones. Tilt the seat back right forward to allow you to get the seat out the door. If the seat has electric controls there will be some plugs to disconnect under it. If there are any yellow coloured plugs, DO NOT disconnect them without disconnecting the negative terminal off the battery and waiting for 5 minutes. The yellow plug is an airbag system plug, and if the battery is not disconnected the airbags could potentially deploy. Make sure the battery remains disconnected for the entire time that the yellow plug is disconnected, and reconnect the battery AFTER the yellow plug. If there isn't a yellow plug, don't worry.

Hope this helps.

Posted on Oct 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the starter on my 1993 Acura Legend?


Hi Gayle,here's a Autozone repair guide on replacing your starter,once off,have Autozone test it to see if it's bad,they will need it on a trade in,core.They test it for free,take's only a few minutes. SAVE 20 GET 10 GIFT CARD ON ONLINE SHIP TO HOME ORDERS OF 100 OR MORE Also here's something else to look at.

Starter Cutoff Relay

1993 Acura Legend 3.2L FI 6cyl

The Starter Cutoff Relay is located: Front seating area, driver side, under dash, mounted in fuse block.

Jul 28, 2015 | 1993 Acura Legend

1 Answer

1993 honda acura legend removing power left side


if your removing the seat there are 4 bolts that secure the seat rails to the floor of the car these are what the seat moves back and forth on, that need to be removed then find the electrical connector and unhook then remove the seat.

Aug 27, 2014 | 1993 Acura Legend

1 Answer

How to replace the driver seat motor?


un plug the motor and take a voltage motor and check for voltage at the plug

Apr 08, 2010 | 1988 Acura Legend

2 Answers

How to replace fuel pump on 1992 acura legend


Remove and check for a access door under the back seat.

Jul 19, 2009 | 1991 Acura Legend

1 Answer

Driver seat removal


there are four bolts (2 in ft ,2 in rear)that bolt seat to floor. you will need slide seat all the way forward to access rear bolts, they may ,if they are still there, be under plastic beauty caps. do the same for ft bolts. once loose tillt seat assy backwards and unplug any wiring connectors on bottom f seat

Oct 26, 2008 | 1988 Acura Legend

1 Answer

1992 Accura Legend Back speakers


you need to remove the rear deck to get to the speaker, that means the rears seat need to be remove too to get to the rear deck

Sep 20, 2008 | 1992 Acura Legend

1 Answer

Back seat of 89 acura legend


well the is a couple ways to fix it, first you can take out the seat cushion and reach behind and its a done deal, or you can crawl through the trunk to the seat and do it that way.

Jun 19, 2008 | 1989 Acura Legend

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

208 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...