Question about 1993 Nissan Maxima

1 Answer

Car miss's engine miss

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 5,370 Answers

For engine misfiring problem check the help links mentioned below.Click the link below to go through the troubleshooting procedure :---- Engine misses and truck jumps? Hard to down shift? Issue with high gear only? http://technoanswers.blogspot.in/2012/02/engine-miss-and-truck-jumps-hard-to.html-----------Bad miss at idle? http://technoanswers.blogspot.com/2012/01/bad-miss-at-idle.html
-----------While stop engine idles like cylinder missing? http://schematicsdiagram.blogspot.com/2012/01/while-stop-engine-idles-like-cylinder.html
------------Engine Misfire codes for car?

http://schematicsdiagram.blogspot.com/2011/12/engine-misfire-codes-on-chevrolet.html


Engine Misfire codes?

http://schematicsdiagram.blogspot.com/2011/12/engine-misfire-codes-on-chevrolet.html

--------------
Misfire on cylinder 4?

http://schematicsdiagram.blogspot.com/2011/12/misfire-on-cylinder-4.html

-----------
Oil on spark plugs and car misfires? http://technoanswers.blogspot.in/2012/02/oil-on-spark-plugs-and-car-misfires.html
----------This will help.Thanks.

Posted on Feb 18, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Missing and reduce power don't run over 30 miles


Check your cat. converter on the exhaust. Start engine and using a rag (so you don't burn yourself) block the tailpipe and how much pressure is coming out. If it seems to take some time to build up the converter could be plugged. Next disconnect the exhaust at the engine tie up the exhaust so it won't drag and road test. If the converter is bad the engine will run normal if still runs the same then you will need the electronics checked out.

Feb 16, 2013 | 2004 Chevrolet Colorado

1 Answer

No power/ engine missing


ANY HEAD PROBLEM WILL OVER HEAT THE ENGINE IN LESS THAT 2 MIN. MAY BE A SET OF PLUGS AND WIRES CAP AND ROTOR WOULD BE A GOOD START. DONT FOR GET THE FUEL FILTER.

Feb 14, 2013 | Cars & Trucks

1 Answer

Engine missing mainly between 45 and 55 mph


I'm going to assume you have the 3.4 V6 engine which uses direct ignition with a coil on each plug.
Could be ignition or fuel related.
A weak spark/coil will allow the engine to run on all 6 cylinders at idle but miss under load, especially when going into overdrive at 45 mph. Not enough spark to jump the gap.
Same thing with low fuel pressure or dirty injectors. Not enough fuel when the engine is working hard.
Usually when you get a hard miss you will get a trouble code for the cylinder that is not giving power.
Have you changed the fuel filter in the past 12 months ?

Jan 22, 2013 | 1997 Toyota 4Runner

1 Answer

I have a 1995 Chevy S10 4.3L Engine. What would cause the engine to miss during acceleration??


Have you changed the spark plugs this year ?
Is the check engine light on ?
How's the cap rotor and wires ?
A miss under load is normal when one of the spark plugs is weak or they are not getting enough voltage from the coil. Also, a weak injector or problem with the fuel system can cause a miss.

Jul 31, 2012 | Cars & Trucks

1 Answer

Starter works fine but won't crank engine. the pick up has to be given a push first before it starts


If the starter is spinning when you try to start but doesn't spin the engine over then you most likely have teeth missing off the flywheel ring gear. The facts that you say you have to push it and then it starts means the flywheel position changes and the starter has good teeth on the flywheel to engage. To confirm this next time the engine won't crank over remove the starter and look inside at the flywheel for missing flywheel teeth.

Mar 13, 2012 | Ford Cars & Trucks

1 Answer

Missfiring detected in OLDSMOBILE intrigue 2002 3.5L


For engine misfiring problem check the help links mentioned below. Click the link below to go through the troubleshooting procedure :---- Engine misses and truck jumps? Hard to down shift? Issue with high gear only? http://technoanswers.blogspot.in/2012/02/engine-miss-and-truck-jumps-hard-to.html

-----------
Bad miss at idle?

http://technoanswers.blogspot.com/2012/01/bad-miss-at-idle.html

-----------
While stop engine idles like cylinder missing?

http://schematicsdiagram.blogspot.com/2012/01/while-stop-engine-idles-like-cylinder.html

------------
Engine Misfire codes for car?

http://schematicsdiagram.blogspot.com/2011/12/engine-misfire-codes-on-chevrolet.html
Engine Misfire codes?

http://schematicsdiagram.blogspot.com/2011/12/engine-misfire-codes-on-chevrolet.html

--------------
Misfire on cylinder 4?

http://schematicsdiagram.blogspot.com/2011/12/misfire-on-cylinder-4.html

-----------
Oil on spark plugs and car misfires?

http://technoanswers.blogspot.in/2012/02/oil-on-spark-plugs-and-car-misfires.html

----------

This will help.

Thanks.

Jan 30, 2012 | 2002 Oldsmobile Intrigue

1 Answer

2001 chevy cavalier, 2.2 auto, 140, 000 miles. Very rough idle, definite miss at a higher rpm (repetitive and identical spacing on the miss), and very hard shifts. Replaced plugs, wires, fuel filter, both...


check for a vacumn leak around the cyl head by spraying carb cleaner near head (caution do not spray flamable fluids on hot exhaust) listen for engine speed changes or smooth running/ engine faultering / stall, ....... could be broken vacumn line also......

Jul 19, 2011 | 2001 Chevrolet Cavalier

2 Answers

Navara d22 on 53 plate missing at 2.500 r.pm and


i had a similar problem it turned out to be a neuteral selecter sensor located on the gear box

May 09, 2009 | 1997 Nissan Pickup

Not finding what you are looking for?
1993 Nissan Maxima Logo

560 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...