Question about Kia Sportage

Open Question

How to remove kia sportage front fender - Sportage Kia Cars & Trucks

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: How do you remove Audio-CD player from a 2002 Kia Sportage

after you remove all the screws from the dash you have to get down to a section by the pedals and remove something like the airbag to get at the last part of the dash apart. then you need to unplug the mirror and back wiper switches (opt i think). then you have access to your radio. These are all things i gathered from watching the guy at futureshop do, it was about $100 and now I don't have fm radio. but I am now going to try it on my own.

Posted on Oct 23, 2008

Ad
  • 1071 Answers

SOURCE: 2000 kia sportage pump is working relays have been

there is a splice for fuel injectors at the front of the fuel rail conduit and electric tape will need to be removed to see if it is ok then clean up all engine grounds and ecm grounds on passenger side kick panel if this doesnt help check coils and crank sensor

Posted on Jul 22, 2009

  • 2 Answers

SOURCE: 07 Kia Sportage 4x4 V6 Front windshield wipers stopped working.

o yeah take back to dealership where they will fix it for free

Posted on Aug 17, 2009

  • 14036 Answers

SOURCE: 2005 Kia Sportage serpentine belt

YOU NEED THE BELT TENSIONER TOOL ITS FITS IN THE SQUARE SLOTS IN THE TENSIONER.YOU ROTATE TENSIONER CLOCKWISE TO REMOVE BELT.

Posted on Aug 23, 2009

c17hydro
  • 2984 Answers

SOURCE: the easiest way to pull the heater core from a kia sportage-2000

There is no real easy way to do it....not like the older cars..

  1. Disconnect the negative battery cable.

    CAUTION After disconnecting the negative battery cable, wait for at least 10 minutes for the air bag module to deplete its stored energy.

    1. Remove the driver’s side air bag and steering wheel by performing the following procedure:
    2. Position the front wheels in the straight-ahead position.
  2. Remove the 4 steering wheel-to-air bag module bolts.
  3. Carefully, lift the air bag module and disconnect the electrical connector.

    CAUTION Place the air bag module in a safe location with the front facing upward.

  4. Remove the steering wheel-to-steering column nut.

    NOTE If may be necessary to mark the steering wheel to steering column alignment.

  5. Using a steering wheel puller, press the steering wheel from the steering column.
  6. Drain the cooling system into a clean container for reuse.
  7. Discharge and recover the air conditioning system refrigerant.
    1. Remove the instrument panel by performing the following procedure:
    2. Remove both the rear and front consoles.
    3. Remove the knee bolster assembly.
    4. Remove the “T” bar section.
    5. Remove the relay bracket.
    6. Remove the turn signal assembly and the upper/lower steering column covers.
    7. Remove the hood release handle lockscrew, the hood release handle and the cable assembly nut.
    8. Remove the left side front pillar trim and the lower left side cover.
    9. Remove the 2 left side of the “T” bar-to-chassis bolts.
    10. At the left side of the instrument panel, remove the 3 instrument panel-to-chassis bolts.
    11. Remove the ashtray.
    12. Remove the center panel trim.
    13. Remove the ventilation control panel.
    14. At the center of the windshield next to the windshield, remove the cap and the mounting bolt.
    15. " Remove the right side front pillar trim and the lower right side cover.
    16. Remove the 2 right side of the “T” bar-to-chassis bolts.
    17. At the right side of the instrument panel, remove the 3 instrument panel-to-chassis bolts.
    18. Remove the steering column-to-instrument panel bolts and lower the steering column.
    19. Disconnect the instrument panel electrical connectors.
    20. Remove the instrument panel.
    1. Remove the blower/evaporator housing by performing the following procedure:
    2. Disconnect the air conditioning refrigerant lines from the evaporator core and discard the gaskets. Plug the openings to prevent contamination.
  8. Disconnect the fresh air control cable from the blower/evaporator housing inlet duct.
  9. Disconnect the 5 connectors from the bottom of the blower/evaporator housing.
  10. Move the carpeting from the bulkhead to gain access to the hole cover plate.
  11. Remove the 4 hole cover plate nuts and the plate.
  12. Remove the 2 upper blower/evaporator housing bolts.
  13. Remove the 2 lower blower/evaporator housing-to-bulkhead nuts.
  14. Remove the blower/evaporator housing.
  15. Disconnect the heater hoses from the heater core.
  16. Remove the temperature control cable from the heater housing.
  17. Remove the 2 lower heater housing nuts and the upper heater housing-to-bulkhead nut.
  18. Remove the heater housing.
    1. Disassemble the heater housing by performing the following procedure:
    2. Remove the seal from the heater core tube connections.
    • Remove the vent seal.
    • Remove the 2 wiring harness-to-heater servo screws.
    • Remove the 8 heater housing clips located on the servo side (left side).
    • Remove the left side of the heater housing.
    • Remove the 6 heater housing assembly clips.
    • Remove the 4 heater core tube mounting bracket screws and the bracket.
    • Remove the 8 remaining heater housing clips and disassemble the housings.
    • Remove the heater core from the housing.

  • f277857.gif
    Exploded view of the heater core and heater housing assembly—Kia Sportage


    THIS IS JUST TO REMOVE IT!

    Posted on Oct 18, 2009

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    2 Answers

    How do I remove Plugs in a 2005 Kia Sportage EX 2.7 engine?


    2007 Kia Sportage EX rear spark plug replacement - YouTube

    ? 6:37
    https://www.youtube.com/watch?v=_LWOhb-bKt8
    Sep 26, 2013 - Uploaded by madwldgrp1
    07 Kia Sportage EX spark plug removal/replacement.

    2007 Kia Sportage EX plenum/rear spark plug replacement - YouTube

    ? 11:04
    https://www.youtube.com/watch?v=rmHxrh8GagQ Sep 26, 2013 - Uploaded by madwldgrp1
    07 Kia Sportage EX spark plug replacement. ... 2007 Kia Sportage EX plenum/rear spark plug replacement ...

    best way to change sparkplugs on 2005 kia sportage ex 2 wd

    https://www.justanswer.com > Car Questions Thanks for the information. The professional labor time to replace the spark plugs on the V6 engine is 1.8 hours, mainly because of removal of engine cover, ... remove Plugs in 2005 Kia Sportage EX 2 7 Google Search

    Nov 01, 2017 | Kia Cars & Trucks

    1 Answer

    2000 Kia Sportage Fuse Problem.


    a wire has wore through somewhere perhaps where t goes through a fender panel a 30 amp fuse is huge so you have a dead short. look front fenders grab wires look for where they may be rubbing from vibration while driving {sharp edge of opening] should be easie to find from a burn mark. dont keep replaceing fuse untill you find the burn spot.[short]

    Nov 21, 2013 | 2000 Kia Sportage

    1 Answer

    Location of fuel pump relay on 2006 Kia Sportage


    Lift the hood. Remove the cover on the fuse relay box located on the driver's side fender well. Remove the fuel pump relay from the box. A diagram on the box cover identifies the relays.


    Read more: How to Troubleshoot the Fuel Pump Relay on a 1996 Kia Sportage ' eHow.com http://www.ehow.com/how_6311393_troubleshoot-relay-1996-kia-sportage.html#ixzz2LpfqkcfK

    Feb 24, 2013 | 2006 Kia Sportage

    1 Answer

    Where is the fuel pump relay button located atfor a 2001 kia sportage


    its under the hood on the top of the inner fender, forgot wich side but you will find it.

    Aug 22, 2010 | 1998 Kia Sportage

    2 Answers

    Where is fuel filter on Kia 2001 sportage located?


    Hi there,

    Here is the exploded view of your fuel system, fuel filters are encircled..

    32cdb89.jpg
    Regards,
    Jeep Brainy

    Sep 08, 2009 | 2001 Kia Sportage

    1 Answer

    I have a 2002 Kia Sportage - idle slow when stopping at lights


    Even though the fuel filter and pump are easy to replace, I would start with the IAC sensor first. It is easier to get to and is cheaper than the other two if you can find one at a wrecking yard (should be around $20). This sensor is the Idle Air Control sensor, and the computer decides how much throttle to give at idle from the readings of the sensor. If it is bad your car will idle poorly or not at all.

    You can verify this two simple ways:

    1. Disconnect the sensor completely and see if anything changes. If you get the same issue, then it's probably the sensor. If different then it could be fuel delivery.

    2. With it all hooked up; try throttling the engine yourself at 1000-1200 rpm and see if it is smooth. If it is then it is probably the sensor. If not then could be the fuel delivery.

    The sensor is under the silver and black, plastic KIA cover over the engine (4 small nuts to remove), and is center above the engine on the front side of the intake pipe.

    73b4453.jpg

    The part looks like this:
    3b700f2.jpg

    If it seems to still be fuel delivery, the filter is (facing the engine from the front of the car) down to the left and toward the back attached to the fender well (Just to the right of and below the battery)

    Jul 12, 2009 | 2002 Kia Sportage

    1 Answer

    Rotor removal


    they either just pull off or there will be a couple of phillips head screws in them.

    May 21, 2009 | 2000 Kia Sportage

    2 Answers

    How to remove the headlights on a 2001 Kia sportage


    remove the indicator lens by pulling on the spring/bracket inside the engine bay and you should find another bolt

    Feb 11, 2009 | 2001 Kia Sportage

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    163 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Kia Experts

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22246 Answers

    yadayada
    yadayada

    Level 3 Expert

    76846 Answers

    Ronny Bennett Sr.
    Ronny Bennett Sr.

    Level 3 Expert

    6927 Answers

    Are you a Kia Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...