Question about 2001 Nissan Maxima

1 Answer

2001 maxima wont start after changing crank and cam sensors

I changed both crank sensors and cam sensors the car starts sometimes on one crank turn it off it wont start again . leave it alone for a few days come back to it then it may start up or not

Posted by on

  • ryan pinder Feb 17, 2012

    i had the car being checked out for the past week they tried a difrnt ecu checked all the sensors but cant find the problem

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 5,370 Answers

Car not starting or turning over indicates towards multiple possibilities. It can be issue with battery or weak battery. But if battery checks out ok, then it can be starter issue or faulty alternator or problem with low fuel pressure or no spark at spark plugs due to dirty spark plugs or faulty ignition coil or injectors getting cracked or dirty and needs to be cleaned.


To confirm the problem, the basic troubleshooting is required.


Click this link below and follow the troubleshooting:------

http://technoanswers.blogspot.in/2012/02/car-starting-issues.html

---------

This will help.

Thanks.

Posted on Mar 05, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
frcs68
  • 1605 Answers

SOURCE: i got 1995 nissan maxima

The knock sensor error could be the sensor, sensor circuit, or some misfire caused by a dirty/bad injector or some ignition problem.

One issue that might tie it all together is coolant leak causing the misfire/knock like a head gasket, but I think you would be throwing more codes or you would see more problems than what you have.

Posted on May 19, 2009

johnny5846
  • 379 Answers

SOURCE: location of a o2 sensor 2001 nissan maxima

bank 1 refers to the side of the engine that #1 cylinder is on , and sensor 2 refers to downstream , after the catalytic converter. , this link shows bank 1 on a 2001 nissan maxima V6 being on the firewall side . if you had a 4 cylinder it would be downstream after the catalytic converter .

http://www.autozone.com/N,26200242/shopping/specsSelect.htm



Posted on Jan 04, 2009

  • 1 Answer

SOURCE: nissan 1995 maxima keeps stopping

I had a similiar problem with my 95 maxima. It turned out to be a bad MAF sensor. Check it out and make sure the sensor is not dirty. you can try cleaning it with a MAF sensor spray. I replace my with one from the junkyard.

Posted on Feb 23, 2009

  • 416 Answers

SOURCE: 2001 nissan maxima gle crank no start code p1320...please help

Primary ignition fault. Reasons: Bad distributor cap (most likely) or ignition control module/ignition coil.
Hope that helps
Good Luck

Posted on Mar 18, 2009

  • 172 Answers

SOURCE: Car is stalling while driving

Fuel filter?

Posted on Aug 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 dodge intrepid .sometimes will crank and then won't .changed crank sensor,cam sensor, fuelpump and computer.any ideas


it is cranking ( turning over ) but not starting
check the cam shaft position sensor wires . immobilizer operation

Apr 16, 2017 | Dodge Cars & Trucks

2 Answers

My 2001 dodge neon cranked without the cam sensor connected. what's wrong with this picture?


Changing the Cam Position Sensor on Dodge Neon ...

? 10:33
https://www.youtube.com/watch?v=ciCPQ0kVAQY
Dec 21, 2012 - Uploaded by VeeTheAmazingGreek
... had to change out the cam position sensor on my 2001 Dodge Neon. ... 1997 Dodge Neon no start, crank sensor problems - Duration: 26:53.

Dodge Neon Questions - It will turn over but has no spark ...

www.cargurus.com > Questions > Dodge > Neon

CarGurusAug 9, 2015 - I did have a neon while ago and image crank sensor was bad ... my 1999dodge neon has no spark it will turn over but not fire i have changed the crank sensorcoil ... I have a 2001 Dodge Neon 2.0 with 140,000 kms on it.

Dodge Neon Questions - 2001 Dodge Neon will turn over ...

www.cargurus.com > Questions > Dodge > Neon

CarGurusJan 7, 2013 - I have a 2001 Dodge Neon 2.0 with 140000 kms o... ... went about a month before this recent problem, fixed that with no problem now this. ... firing. you said you replaced the cam sensor, did you do the crank sensor as well? ... My 1996Dodge Neon won't stay running whenever I take my foot off of the gas.

Starting Issues and Trouble Code Due to Defective Cam ...

repairpal.com > Problems > Dodge > Neon

Feb 05, 2016 | 2001 Dodge Neon

1 Answer

Cpk sensor ( crank position sensor)


could be cam or crank but more like crank sensor with no start. cam sensor fail engine can start and run in limp mode but crank it will not. but you should still have engine management light on. also there will be codes stored on ecu you can read to find a fault.

Feb 04, 2014 | 2001 Honda Civic

1 Answer

No voltage on crank sensor grand am 2001 2.4


The crank and cam sensors produce ac voltage that is sent to the computer. There are magnets or components on the crank and cam that the sensors "read".
The problem could be the harness between the sensors and the computer, or a mechanical problem like a timing chain or gear.

Sep 21, 2012 | 2001 Pontiac Grand Am SE

2 Answers

2006 Maxima Hard Start When Hot


Is there a check engine light? Even if not, your oxygen flow sensor may be sometimes malfunctioning. Use an OBD-II diagnostic tool to see if you have any readings or error codes. You can borrow one from a friend or some auto parts shops will run that through for you - just give some a call and ask.

Jul 15, 2009 | 2006 Nissan Maxima

2 Answers

2001 chrysler voyager no spark wont start


. Make sure that the distributor rotor is moving when it cranks. check the cap and rotor for cranks. If all is well then change your module inside your distributor.

Mar 25, 2009 | 2001 Chrysler Voyager

3 Answers

2001 nissan maxima gle crank no start code p1320...please help


Primary ignition fault. Reasons: Bad distributor cap (most likely) or ignition control module/ignition coil.
Hope that helps
Good Luck

Mar 18, 2009 | 2001 Nissan Maxima

1 Answer

Can a cam sensor cause a hard start


Yes, cam sensor can cause a hard starting condition, but not that common on a 2000 maxima. I haven't replaced single one on a 2000 Max and I have one also (maxima that is) . Never had any problem with cam or crank sensors. I think that your problem is somewhere else, like IAC valve circuit. Just a tip. Its kinda hard to diagnose something over the computer, without Consult2 (Nissan scanner) beeing hooked up to the car and seeing what the car is doing while cranking for my self.

Oct 03, 2008 | 2000 Nissan Maxima

1 Answer

My 2002 Nissan Maxima hesitates to start


if vehicle hesitates to start do you mean long cranking time (posible fuel pump) or no crank at all then suddenly starts then it is possible starter solenoid (notorious) - complete starter assembly needs replacement.

Aug 20, 2008 | 2002 Nissan Maxima

2 Answers

2003 nissan maxima 3.5


is the check engine light on?? i would suspect your crank angle sensor. replace the cam sensors too. nissan had problem(there is a campaign) with those, so they came out with a crank and cam sensor kits. get the kit ( at a dealer ) and install it. actually have your nissan dealer run your VIN number to see if you don't have open campaign for it, if so, they will replace them for FREE. But that's what I would be looking at if one of those came to me to fix.

Aug 09, 2008 | 2003 Nissan Maxima

Not finding what you are looking for?
2001 Nissan Maxima Logo

467 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...