Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The coolant level sensor is located on the radiator. If you are looking at the engine from the front of the car it will be on the left side. There will some kind of clip holding it in the radiator. Removed the clip and pull the sensor out. You will lose coolant so try to swap it out quick or drain some of the coolant out. Once new sensor is installed, install clip to keep the sensor in place and reconnect the wires to the sensor. Crank the engine and make sure the coolant level is full. This should correct your problem.
Posted on Jan 04, 2009
You're either looking at a short in the wire that goes to the fuel sender, or a bad fuel sender. If it was just a broken wire, it would read empty instead. The fuel sender is a permanent part of the fuel pump, so that has to be replaced as a unit.
Posted on Oct 20, 2009
Tips for a great answer:
Jan 29, 2016 | 2000 Buick Century
Sep 20, 2013 | 2000 Buick Century
Aug 28, 2011 | 2000 Buick Century
Jan 07, 2011 | 2000 Buick Century
Oct 02, 2010 | Buick Century Cars & Trucks
Feb 16, 2010 | 2000 Buick Century
Dec 18, 2009 | 2000 Buick Century
28 people viewed this question
Usually answered in minutes!