Question about 2001 Ford Taurus
Tryed door lock unlock seqence ,diconected bat ,touched pos-neg battery cables over night . fuel pump wont run , theft light blinks Need location of any reset switches or some solution
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
HI, I'm reading your problem,
Let me explain something about your car.
2005 Ford Taurus, The key on that car has Chip inside of the key and receiver on the ignition switch,
Check if the key you are trying to use is Black and has a plastic head.
If not you need a key with that characteristics.
But if you have the right key, Remenber if you had drop on the floor, or hit with something,
Because some times they come damaged, with insignificat thins.
Remenber if you left the key close to a magnets like speakers.
If nothing aply at your case, you need to call a place Aloha Smith, they have the computer to program or reprogarm your key. IF not you can't start your car.
OK.. I hope this information work for you.
Thank's for submit yous question on fixya.com
Posted on Jul 10, 2008
If you are reseting a factory alarm...lock and unlock the drivers door with the key.
If you don't know the code look under the dash driver side in left corner there should be a black cover with a sticker with a code on it 6 numbers that is the factory code.
Posted on Oct 07, 2009
The heavy + should be connected to the battery through the solenoid for the motor. There should be wires to control the solenoid (an electric switch, you know). The - goes to the truck's frame at a place of your choice. The ground must be solid, you know that, right?
I think if I were doing this install, I would hook the plow ground with the battery ground on the fame or where ever it is located.
The plow control should be mounted for your convenience inside the cab.
Lets review: Plow motor | ground to ground, hot to solenoid (motor side) | solenoid (battery side) to battery | solenoid control wires to cab.
Thanks for your question at FixYa.com
Posted on Jan 02, 2010
Tips for a great answer:
Oct 18, 2015 | Ford Cars & Trucks
Mar 29, 2015 | Chevrolet Cars & Trucks
Nov 17, 2014 | 2000 Ford Explorer
Apr 01, 2011 | Ford Windstar Cars & Trucks
Jan 20, 2011 | 1998 Ford Mustang
Jun 25, 2010 | 2004 Ford Explorer
Oct 18, 2009 | 2005 Jeep Grand Cherokee
Jun 30, 2009 | 2001 Ford Taurus
65 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: