Question about 1996 Plymouth Voyager

1 Answer

No spark replaced distruipter, checked fuses and coil all ok

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 176 Answers

It could be your timing belt. take the distributor cap off and see if the rotor is turning when you crank it over. then it is timing belt

Posted on Feb 17, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

98 ford explorer replaced egnition. Now it wont start. Starting fluid does turn it over. But isn't getting feul


out of fueL, bad fuel , old fuel>?

replace what exactly , ignition parts t are many.
key switch.?
Igniton coil(or coils, or cops or coil packs)
Distributor.
spark wire, (not replaced 1 by 1 = fail..)
ok , the PCM monitors spark and that fails, (even if spark is good)
it will cut fuel. so what did you touch>?

i use a noid light, if pass I check fuel pressure
if noid fails, i find out why PCM is cutting fuel.
check fuses 1st. always. for ever. and ever

Jul 05, 2014 | Cars & Trucks

1 Answer

1995 dodge dakota v6 will not start began to run rough spit sputter. replaced cam sensor no change .tried changing ign coil no change. checked pwr to coil at plugin no pwr used a voltage meter checked...


If you have no power to the coil with key on, it might be the crank sensor. The spit and sputter ckould be a fuel problem, but if you have no spark now, check the crank sensor.

Dec 05, 2012 | Cars & Trucks

1 Answer

I have a 95 gmc the truck just quit well driving i have no spark i've checked voltage at the coil ,checked coil ,changed coil,checked & changed module .checked fuses replaced computer, all out of...


Pull a spark plug and see if it is wet with gas. If it is wet, then the fuel is ok. Assuming that you are getting fuel, my suggestion is to replace the Crankshaft Position Sensor. Let me know the results.

Jan 01, 2011 | Chevrolet C1500 Cars & Trucks

1 Answer

I have a 1967 malibu and I am not getting fire to the distributor.


try this: turn key on, momentarily jump negative coil terminal to ground to see if coil will release a spark. If no spark, use a test light to check for voltage at positive coil terminal. If there is voltage, replace the coil. If no voltage, suspect ignition switch or fuse.
If coil releases spark, check breaker points operation. If points ok, replace condenser.

If you have questions, please let me know.

Oct 11, 2010 | Chevrolet Malibu Cars & Trucks

2 Answers

No spark


Could be many issues: cam sensor, crank sensor, ECU. wiring ect...
I'dI start by checking/replacing the crank or cam sensor if ok I'd proceed from there. What car, year and engine?

Thanks,
Tom

Aug 22, 2009 | 1997 Chrysler Concorde

2 Answers

No spark at coil, no blown fuses, turns over fine ,but no start.


check module in distributor, check coil in top of cap also ,check the plugs to see if spark is there, if not coil is bad or module in distributor ,hope this helps thanks robert b.

Jul 05, 2009 | 2000 Chevrolet Astro

1 Answer

1990 ford ranger 2.3L running rough at idle and while driving


Hi check all the fuse. fi the fuse are ok . remove the coil pack and reverce if the cly missifire change replace the coil if not chage replace the electronic comtrol module ok.

Apr 20, 2009 | 1990 Ford Ranger SuperCab

1 Answer

Galant Special Edition 1994 Motor does not start


this maybe caused by no fuel or faulty fuel pump, ignition coil, wire and plug crank position sensor. first check for spark by removing on spark plug wire and put a spark plug in the spark plug wire boot, donot touch the plug only the boot have someone crank the car over. if you see spark, that part of the ignition is good. if not, check the coil resistance if should 40 to 80 ohm with a volt meter pf not replace. if ok, but no spark check the igniton control madule make sure the coil and module are receiving current. if not check the fuse that feels them. if it is ok, check distributor cap and rotor. if rotor and cap are fine, check for fuel at either the fuel filter, the fuel return line or removing some spark plug and see if they are wet. if there is no fuel check the fuel pump and the fuse and relay that control the pump. if there is fuel with high pressure but there is no spark, check the crank sensor for signal with a volt meter while cranking the vehicle

Jan 02, 2009 | 1993 Mitsubishi Galant

1 Answer

No SPARK, checked voltages at ICU and impedence at coil. Both were ok, so based on manual, replaced ICU. Still no spark. fuses in main fuse box and under hood checked ok as well.


I had the same problem last week. The coil will still check good but will fail under a load. Remove it from the distributor and you will see a burn mark on it.
This means it was bad and must be replaced.
I hope this work for you.

Jul 30, 2008 | 1994 Honda Civic Del Sol

2 Answers

94 toyota camery no spark


I had the same problem recently but replacing the ignition Coil under the distributor (inside) solved the problem. Also replaced the distributor Cap and rotor at the same time.

Jul 18, 2008 | 1994 Toyota Camry

Not finding what you are looking for?
1996 Plymouth Voyager Logo

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...