Question about Volkswagen Beetle
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
if U live in a cold climate use 5W-30W, if u live in a moderate climate with hot summers use 10W-30W, any name brand meets your engines requirements. Do not use any oils heavier than these two, it can cause engine bearing damage.
Posted on Dec 18, 2008
Disconnect your negative battery cable. Locate and remove the screws that hold your interior door handles in place (they may be hidden by snap in, or snap on clips). Remove the interior door handles, then disconnect the wire clips to the switches. Your panel is held in place by snap in clips; use a small pry bar to pull them from the door (try to get as close to, or directly under the clips to prevent them from tearing out of the door panel). Once the clips are pulled, pull the panel upward to remove it from the door.
Install in reverse.
Posted on May 25, 2009
the park sensors send out a beam and the return signal intensity tells it the distance.if there is dirt or water in the sensor or it is shorted,it will think you are very close to an object and beep like that.there is more than one,disconnect them one at a time,or take them out and measure the comparative resistance.the one that is no good will read different
Posted on Jun 14, 2009
try asking someone to walk past the back of the car when its in reverse.with the brake on please...you described what happens when you arm the sensors....
Posted on Mar 08, 2010
Tips for a great answer:
Nov 09, 2014 | 2000 Volkswagen Beetle
Aug 17, 2008 | 2000 Volkswagen Beetle
Nov 29, 2012 | 2003 Volkswagen New Beetle Convertible
Dec 03, 2009 | 2003 Volkswagen Beetle TDI
Jun 26, 2009 | 2001 Volkswagen Beetle
28 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: