Question about 1998 Oldsmobile Aurora

1 Answer

Where is my torque converter clutch located on my 98 oldsmobile aurora

Where is the torque converter clutch located

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,608 Answers

The torque converter is in the front of the transmission.In the front of the trans.You need to remove the trans.to get to it.Depending on the problem your having.There are a few parts involved in the torque converter.You can try googling torque converter and you will get an idea of what is involved. Hope this helps.Good luck.

Posted on Feb 18, 2012

Testimonial: "thank you, do you know where all of the ground wires are located on this car?"

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

cs204727
  • 1 Answer

SOURCE: 98 Oldsmobile Aurora 4.0 liter

replace belt on water pump and adjust the idlearm

Posted on May 18, 2008

  • 2 Answers

SOURCE: 1999 olds aurora starter

The starter is located under the intake manifold.

Posted on Oct 02, 2008

emissionwiz
  • 74945 Answers

SOURCE: I hooked up computer on 1999 Oldsmobile Intrigue got trouble code

Go to the provided link for explanation and trouble shooting of this code, the part is called the TCC solenoid.

Posted on Apr 01, 2009

Monster80
  • 460 Answers

SOURCE: I hooked up computer on 1999 Oldsmobile Intrigue got trouble code

This problem will cause car to stall either in gear and not moving and coming up to stop.To fix side cover of trans will need to be removed and new sensor put in for lock up torq converter..Hope this helps you And Have A Great day

Posted on Apr 01, 2009

  • 454 Answers

SOURCE: my headlights wont work only my brights will come

The most likely culprit is a defective hi/low beam light switch.

Posted on Oct 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2001 aurora and code p1860 p1860 came up what is this and how much to fix


P1860 All GM - TCC (transmission Torque Converter Clutch) PWM Solenoid Circuit Electrical.
P1860 Description The Torque Converter Clutch Pulse Width Modulation (TCC PWM) solenoid valve controls the fluid acting on the converter clutch valve. The converter clutch valve controls the TCC application and release. The solenoid attaches to the control valve body within the transmission. The solenoid receives ignition voltage through circuit 239. The Powertrain Control Module (PCM) controls the solenoid by providing a ground path on circuit 418. Current flows through the solenoid coil according to the duty cycle (percentage of ON and OFF time). The TCC PWM solenoid valve provides a smooth engagement of the torque converter clutch by operating during a duty cycle percent of ON time.
When is the code detected? When the PCM detects a continuous open, short to ground or short to power in the TCC PWM solenoid valve circuit, then DTC P1860 sets. DTC P1860 is a type B DTC.

Possible causes - Faulty Torque Converter Clutch Pulse Width Modulation (TCC PWM) Solenoid
- Torque Converter Clutch Pulse Width Modulation (TCC PWM) Solenoid harness is open or shorted
- Torque Converter Clutch Pulse Width Modulation (TCC PWM) Solenoid circuit poor electrical connection. Unless you have a factory manual and very good auto repair skills this is best left to an expert. It is a messy dirty job that requires removing the parts inside the transmission for testing..

Aug 23, 2016 | Cars & Trucks

1 Answer

Code p 1806


The code is for a problem with the torque converter clutch in the transaxle.
Could be a solenoid or wiring problem.
You may need to have a shop take a look at it.

Aug 06, 2012 | 2001 Oldsmobile Aurora

1 Answer

At about 40MPH (just after it has shifted) it feels like there is a slight miss in the engine. I am being told it may be a torque converter.


yes, the torque convert is just locking up. The tiny friction clutches are catching/ Need a trans flsuh/

Dec 11, 2010 | 2001 Oldsmobile Aurora

1 Answer

Is ther something that controls the torque converter


YEP THE TORQUE CONVERTER CLUTCH SOLENOID ON THE VALVE BODY.MAKE SURE YOUR ENGINE IS WELL TUNE AND FLUID LEVEL IS CORRECT.AND FLUID + FILTER HAS BEEN CHANGE RECENTLY.

Apr 18, 2010 | 2001 Oldsmobile Aurora

1 Answer

1999 oldsmobile aurora torque converter is stuck


TORQUE CONVERTER IS STUCK THIS IS THE POSSIBLE CAUSES LIKE INTERNAL DAMAGE.OIL PRESSURE TOO LOW.CONVERTER CLUTCH VALVE STUCK.RESTRICTION IN OILN PASSAGES.LEAKS OR CRACKS IN THE FILTER.FAULTY CONVERTER CLUTCH SOLENOID.WHICH WILL CAUSE CONVERTER NOT TO RELEASE.

Feb 26, 2010 | 1999 Oldsmobile Alero

3 Answers

My car keeps cutting off when i stop


that will be the EGR valve or TTC lock up
the exhaust gas recirculation valve is not closing all the way too the torque converter clutch lock up may not have disengage , Lee

Jan 23, 2010 | 1998 Oldsmobile Aurora

1 Answer

98 Olds Aurora A/C won't take a charge and gauges don't move (high or low sides). the pressure is 55 on the low and 120 on high but do not go up or down but compressor is running.


is the electric clutch engaging? if so your compressor is shot. if not, check the fuse panels (under dash and under hood). It could also be a relay located in the fuse block under the hood. Hope this helps.

Aug 08, 2009 | 1999 Oldsmobile Aurora

1 Answer

Shudders and dies when braking


this is most likely caused by a dectective torque converter clutch soleniod not unlocking the torque converter clutch whe the brake is applied..

Jun 03, 2009 | 1993 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
1998 Oldsmobile Aurora Logo

Related Topics:

276 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...