Question about 2007 Ford Edge SEL Plus

Open Question

Door memory code 07 ford edge how to change the code/memory

Have an 07 edge(bought used from the dealer) want/need to change the door memory entry code so I can use the key pad on the door.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

bibleman01
  • 334 Answers

SOURCE: keyless key pad entry code

Ford cars and such will put a sticker on the hinge or back gate with the numbers on it. It will just be a white sticker with black numbers. A five digit code.

God Bless Greg

Posted on Nov 25, 2008

chuck943
  • 783 Answers

SOURCE: CHANGE CODE ON KEYLESS ENTRY SYSTEM FORD EDGE

Yes you can program your own code by inputting the original code then hit the no. 2 button then input your own 5 digit code.

Posted on Mar 16, 2009

  • 1 Answer

SOURCE: Need factory code for keyless entry pad

To locate the original keypad code, open the passenger/rear door. Pull the on-body rubber weatherstrip out, around the rear side of the door closure. Fold the right/rear seatback down into the locked position to facilitate access to the right/rear seat belt anchor. Carefully pry the upper plastic panel that houses the height adjuster and seat belt anchor off the body taking care not to damage the panel. Now pry the lower panel outward just far enough to enable access to the Vehicle Security Module, where you'll see three electrical connectors plugged into it, coloured green, grey, and blue. On the module will be a series of digits on a label similar to 5L2T-15K602-EA. Beside those digits are five numbers. Those five numbers are the keyless entry keypad code.

Posted on Apr 30, 2009

  • 1 Answer

SOURCE: need key less entry code

I have a 1996 4-dr, 2wd, and the code is inside the interior compartment above the passenger-side rear wheel, just under the side glass. It's been so long since I've seen it, I don't even remember what that panel compartment is for.

Posted on May 22, 2009

  • 147 Answers

SOURCE: code for door key pad

there is supposed to be a card in the glove box with the code on it.if not there look on all doors and trunk lid(rear hatch) for a sticker

Posted on Jan 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I bought a used ford edge but the owner did not have keyless entry code, where can i get this


I have the same car. If you are serious about getting the code number for the car you need to visit ford dealer: & get a/the code number, then get the code activated in the car, and pay a serious $$.

I do not use the feature due to the cost the activate it.

Jun 27, 2014 | 2007 Ford Edge SEL Plus

3 Answers

Where is the computer module on the 2006 f350


Location of Keyless Code on Computer Module of Ford F250 Superduty ( 2009 )

Finding this code seems to be a common problem, so, here is a better answer to save you the time I spent locating the sticker on the computer module that shows the keyless entry code.

One owners from 2008 F150 XLT Superduty tell me and I suspect the location for a F150 would be very near same location as on a F250

The computer module is mounted high on the firewall approximately behind the a/c fan speed control knob. Here is how to find it / get to it:

1. Remove the large cover under the steering column that covers the fuse block. You'll need to reach in under the dash, with your left arm, to the right of the steering column and left of center to move stuff to get a clear view.

2. Open the storage pocket door on the lower edge of the dash (right of the steering column) and squeeze the back side of the storage pocket to allow the stops to pass to the front. This will allow the opening to be clear to see the computer module up in the dash. Shine your flash light through this opening.

3. Move the first piece of white insulation to the side to see the firewall. Look up through the pocket door, moving the wiring harnesses aside if necessary. You'll find a second white insulation wrapped snugly across the computer module. When you push the insulation up to see the flat surface, you see the 5 digit number printed up-side-down in black on a white sticker. This is your keyless entry code.

Instructions for Programming Keyless Entry Code (from the 2008 Owner's Manual)

KEYLESS ENTRY SYSTEM (IF EQUIPPED)
You can use the keyless entry keypad to lock or unlock the doors without using a key.

The keypad can be operated with the factory set 5-digit entry code; this code is located on the owner's wallet card in the glove box, is marked on the computer module, and is available from your authorized dealer. You can also create your own 5-digit personal entry code.

When pressing the controls on the keypad, press the middle of the controls to ensure a good activation.

Programming a personal entry code
To create your own personal entry code:
1. Enter the factory set code. The driver door will unlock.

2. Within five seconds press the 1 • 2 on the keypad.

3. Enter your personal 5-digit code. Each number must be entered within five seconds of each other.

4. The doors will lock then unlock to confirm that your personal keycode has been programmed into the module.

Tips:
• Do not set a code that uses five of the same number.
• Do not use five numbers in sequential order.


Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Aug 02, 2012 | 2006 Ford F 350 Super Duty

1 Answer

Need keyless entry code 2005 ford f150 crew cab truck


The dealer is the only place I know of to get the codes. They will need to verify ownership of the truck and there is usually a charge for it but if you just bought the truck, go back to the dealer where you purchased it. Hopefully you can convince them to foot the bill!

Jan 14, 2012 | Cars & Trucks

2 Answers

I bought a used 2008 ford escape. No owners manual. How do I reset the keyless entry. I don't know the original code.


did you mean the key pad on the door? if it is then you need to track down the original owner to give you the factory code then you can program up to 3 codes.
give the local dealer a call to see if they can run the VIN number for a factory code, they may charge you a fee.
if you bought it from a dealer then they must take care of that for you at no charge.
otherwise you will need to replace the key pad.

Mar 25, 2010 | 2008 Ford Escape

3 Answers

CHANGE CODE ON KEYLESS ENTRY SYSTEM FORD EDGE


Yes you can program your own code by inputting the original code then hit the no. 2 button then input your own 5 digit code.

Mar 16, 2009 | 2007 Ford Edge SEL Plus

1 Answer

How can I find the keyless entry code for a 2002 Explorer Limited


Contact Ford dealer with vehicle serial number and registration

Nov 18, 2008 | 2002 Ford Explorer

2 Answers

Keypad keyless entry code missing


Ford has an add on keypad also if it is pretty much flush on the door it is factory if it is a fat keypad it is an add on The factory module is under the dash by the fuse panel the number should be on it

Oct 15, 2008 | 2006 Ford F 350 Super Duty

2 Answers

How do i change touchpad code on 2007 edge?


Programming a personal entry code and keypad association to
memory seats and mirrors (if equipped)
To create your own personal entry code:
1. Enter the factory set code.
2. Within five seconds press the 1 • 2 on the keypad.
3. Enter your personal 5-digit code. Each number must be entered
within five seconds of each other.
4. To associate the entry code with a memory setting, enter a sixth digit
to indicate which driver should be set in a memory recalled by the
personal entry code:
• Pressing 1 • 2 recalls Driver 1 settings.
• Pressing 3 • 4 recalls Driver 2 settings.
• Pressing other keypad buttons or not pressing a keypad button as a
sixth digit does not set a driver and will not recall a memory setting.
Note: The factory-set code cannot be associated with a memory
setting.
5. The doors will lock then unlock to confirm that your personal keycode
has been programmed to the module.
Tips:
• Do not set a code that uses five of the same number.
• Do not use five numbers in sequential order.
• The factory set code will work even if you have set your own personal
code.
Erasing personal code
1. Enter the factory set 5–digit code.
2. Within five seconds, press the 1 • 2 on the keypad and release.
3. Press and hold the 1 • 2 for two seconds. This must be done within
five seconds of completing Step 2.
All personal codes are now erased and only the factory set 5–digit code
will work

Oct 10, 2008 | 2007 Ford Edge SEL Plus

1 Answer

Key pad on door


I'm assuming you bought the car somewhere other than a Ford/Lincoln dealer (which is OK) because I would expect a Ford/Lincoln dealer to provide all three keys, two remotes, a manual, etc as well as the lock code. I too just purchased an 07 TC. The dealer provided the code for me, but said there are three ways to determine the code (in order of preference):

1. Usually there is a white unlabeled paper sticker with the code number (5 digits) on one of the trunk hinges, but often times it is removed when the car is detailed or the previous owner may have removed it.

2. There may be another similar sticker on the control unit on the right side fender under the hood, again same scenario as above.

3. Any Ford/Lincoln/Mercury dealer can pull the code from the car computer, hopefully for free or nearly free if the car is still under factory warranty, regardless of where you purchased your car.

If you're stuck with option three, particularly if the factory warranty is still good, and even if it isn't, put on a clean shirt, be nice but make 'em step up. After all, even though we may have paid alot less now, these cars MSRP was $45,000 and up only a year ago so they should still treat you and me like gold.

Best of Luck!

SC442299
2007 Signature Limited
4.6L Flex-Fuel (E85/Gas)
Light Ice Blue MetallicClearcoat
Slate/Dove Interior

Aug 13, 2008 | 2007 Lincoln Town Car Signature Limited...

Not finding what you are looking for?
2007 Ford Edge SEL Plus Logo

Related Topics:

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...