Question about 2001 Fiat Punto
You have 1 of 2 possible problems. it will be either the fan switch is shot or the fan speed resistor is shot
Posted on Feb 17, 2012
Testimonial: "thanks where will I find resistor. I presume the fan switch is the one on the dash, speed settings 1 2 3 4 "
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
Posted on Sep 29, 2009
SOURCE: fiat punto acceleration problems
I had a similar problem with a 98 sporting. It turned out to be firstly the clutch had worn down to almost nothing and the fuel filter hadn't been changed in a good while so it got clogged. I would do the filter first. (located just under the drivers side near the rear wheel.
Posted on Apr 27, 2009
SOURCE: Fiat Punto indicators
you need to change the flasher unit .... also check fuse # 24 on the fuse panel inside the vehicle. the flasher unit should be just under the dash on the steering wheel side... i have alot of information on that vehicle but i couldn't find where exactly the flasher unit is located.
Posted on Feb 17, 2009
this is not a big job - infact pretty straight forward -word of warning thou do not buy the replacement pan from e-bay - only tip i can give is once removed leave it standing for 24hours so all access oil is drained - makes it easier to fit new one also a cleaner job and less likely to leak - andy
Posted on Mar 13, 2009
Firstly removve the wheel. Then romove the the caliper by the two hex/alen key screws at the rear. then remove the guard by the two bolts at the front. this should leave only the disk on the hub. there is a small screw on the front which will realease the disk and fitting is te reverasal of removal.
Posted on Jun 06, 2009
Tips for a great answer:
Apr 19, 2017 | Fiat Cars & Trucks
Jan 03, 2016 | Fiat Cars & Trucks
Dec 01, 2015 | Fiat Cars & Trucks
Sep 27, 2014 | 2006 Fiat Stilo 1.6
Jan 24, 2014 | 2006 Fiat Grande Punto
Oct 19, 2012 | Fiat Punto Cars & Trucks
Nov 25, 2010 | 2006 Fiat Strada
Nov 17, 2009 | 2006 Fiat 124
896 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: