Question about Cars & Trucks

1 Answer

How to get warning lights to go off. is there a reset

Posted by on

  • Colin Stickland
    Colin Stickland Feb 17, 2012

    No idea what you mean here please state the make and model of vehicle and the year but as a rule you use a code reader to clear faults so the light goes out

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 76,846 Answers

The warning lights reset by themselves once the problems that turned them on are repaired. If it is a check engine light remove the battery negative cable for 5 minutes, that will reset the systems computer, but if the problem is not repaired the light will come back on very soon if not right away.

Posted on Feb 17, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford Freestar Message Center not visible. Need help resetting tire warning light.


You can't reset the tire pressure warning light (TPMS), when the pressure is adjusted or the sensor replaced (if the warning is false) the light will go out, there is no reset. Check the air pressure in all the tires, they should be about 34 PSI all around.

Jun 03, 2016 | 2004 Ford Freestar

1 Answer

2014 Ghibli. If I replace brake pads and discs does brake warning light turn off by itself or need to be reset?


If you're talking about brake pads that have an electrical connector..
the warning light comes on when the pad is so worn that it allows the electrical connector to earth via the disk .. hence the warning light.

Fitting new pads will not cause a warning light on your dashboard. No reset required.

Dec 22, 2015 | Maserati Cars & Trucks

1 Answer

Tyre Pressure and ABS


By operating the tire pressure warning system reset switch, tire pressure warning system ECU can be set to issue a warning at an inflation pressure that corresponds with the type of tires.
Operate the tire pressure warning system reset switch only after the inflation pressures of all 4 tires have been adjusted on the vehicle.
To initialize the system, press and hold the tire pressure warning system reset switch for 3 seconds or longer with the power switch turned IG-ON. When starting the initialization, the tire pressure warning light blinks 3 times at 0.5 Hz.
During the initialization, the tire pressure warning system valve & transmitter measures the inflation
pressure of the tires, and registers the signals that are transmitted into the ECU at a frequency of 1 per
minute. The initialization process is completed when the signals from the tires have been received.
Once the tire pressure warning system reset switch has been pressed, do not turn the Ignition switch OFF for a few minutes.

Mar 05, 2014 | 2002 Toyota Corolla

1 Answer

My left dipped headlight warning light is on, but the light is working. How do I reset the warning light


You need to reset the level point with a VAG-COM, then clear the codes. You can get a VAG-COM here: http://www.ross-tech.com

Instructions for resetting the level point here:

http://wiki.ross-tech.com/wiki/index.php/Audi_A6_%284F%29_Headlight_Aim_Control_%28Adaptive_Light%29

Sep 16, 2013 | Audi A6 Cars & Trucks

1 Answer

How do i reset flat tyre warning light


To reset tyre warning
switch ignition on,press reset near gearlever
Don,t think connected

Feb 13, 2010 | 2006 Mini Cooper

2 Answers

LEXUS LS 2004 Maint Reqd (Master warning light) how I can switch off after change the oil engine?


You can disconnect your battery for 15 minutes or pull the fuse for an ECM or PCM fuse, but the best way is to visit any local repair shop. Most shops will have a universal Check Engine Light Code Reader that can quickly and safely reset check engine light trouble codes. It should take about 30 seconds.

Ask your local service center if they could reset the check engine light with a Check Engine Light Code Reader.

Dec 14, 2009 | 2004 Lexus LS 430

1 Answer

How do you reset low tire light


1. check and make sure that your tires are inflated to the correct pressure

2. turn the ignition switch to the ON position. If the low tire pressure warning light comes on, push and hold the tire pressure warning reset switch (think the switch is in the glovebox, but not sure) until the warning light turns off and then release the switch.

3. now press and hold the tire pressure warning reset switch until the low tire pressure warning light blinks three times.

4. initialization is *not* completed until driving at the vehicle speed of 19 mph or over for more than one hour. the tire pressure monitoring starts when initialization is completed.

Aug 20, 2009 | 2005 Chrysler PT Cruiser

2 Answers

Engine Life Warning Light Reset


disconnect the battery cable for 3 minutes

Jan 01, 2009 | 2000 Lincoln LS

1 Answer

Tire reset on in ford freestar


Reset without message center:
To reset turn the ignition to the ON position, depress and Trip/odometer
button (located in the instrument cluster) until “TIRE RESET” or
“CHECK TIRE AND RESET” is displayed in the odometer display window.
Once “TIRE RESET” or “CHECK TIRE AND RESET” is displayed,
press and hold the button for three seconds. The low tire warning indicator light will flash three times
as the low tire warning system begins to initialize.

------------------------------------------------------------------------
Reset with message center:
To reset turn the ignition to the ON position, press the set up button on
the message center until “SYSTEM CHECK” is displayed. Press the
RESET button until “HOLD RESET TO RELEARN” is displayed, continue to hold the button for three
seconds. The low tire warning indicator light will flash three times as the low tire warning system begins to initialize.

Oct 13, 2008 | 2005 Ford Freestar

3 Answers

Oil warning light is still on after having the oil change, how do i reset the oil warning light ? /


The oil warning light indicates no oil pressure, changing the oil would not affect the light. You should not drive the car if this light is on, because if it is operating correctly, you will ruin your engine. The car should be checked immediately, and not driven until the cause of the light being on is determined.
good luck, and let me know the outcome. countrycurt0

Oct 03, 2008 | 2005 Chevrolet Impala

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...