Question about Pontiac Grand Prix
Rattle in front as I go over bumps.
Check front suspension springs as a small piece may have broken off it. hope this helps
Posted on Feb 17, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
you must replace and lube the front sway bar bushings,chrysler service bulletin calls it a squak, but can sound like a rubbing, a clunk etc the common factor is this is really noticeable the colder it gets outside
Posted on Mar 03, 2009
It's under the hood, on the driver's side, under a square, black box with a lightning symbol on it. Loosen the flower-shaped screw that holds the lid of the box down, remove the lid, flip it upside down and when you look at the inside of the lid, you'll see a map of all your car's fuses. There's also a fuse diagram on the very end of the dash, but it's accessible only when you open the driver's side door. When you're driving, that end of the dash is blocked by the closed door.
Posted on Jul 01, 2009
Take your car to a dealer and tell them to "clean the throttle body" Known problem for this year. It will solve your issue.
Posted on Dec 30, 2009
Does it try to come up, EG is there power being applied when you press the UP switch? if it makes no sound or movement when pressing the UP switch it is probably a worn out switch - available at Pontiac dealers though you may have to order it and wait a few days - have your VIN number for the parts desk and you'll get the part in no time - the switch levers out of the panel - use a plastic tool if possible to prize the switch out so you don't damage the surrounding trim - the cable connector clips off the old switch and goes on the new switch, press the switch home into the recess and jiggle it a bit to make it dead flat - window should work now.
If it IS making an effort to come up then either you have a poor earth or power connection making it so there is not enough power to pull the windows up (which is harder than down due to the weight of the window) -- check the cabling behind the door panel, and as above pull out the switch and check its connector too.
OR... the window is out of alignment and is jamming - putting it back in alignment means taking off the door panel and getting at the bottom of the window runner, loosening the bolt(s) on the bottom of the runner and moving it sideways so it hold the window steady but not tightly, you may have to try having it tighter or looser against the window till you get the best performance - also oil the moving parts/cables of the window mechanism (dont get oil on the glass, it will smear for weeks) to give the best chance of smooth operation.
Posted on Jan 25, 2010
Tips for a great answer:
Aug 30, 2014 | Cars & Trucks
Apr 24, 2014 | 2004 Pontiac Grand Prix GTP
Mar 13, 2013 | 2001 Pontiac Grand Prix
Aug 08, 2012 | 1995 Pontiac Grand Prix
Jan 28, 2012 | 1996 Mercury Grand Marquis
Dec 04, 2011 | 2004 Pontiac Grand Prix
Jan 24, 2010 | 2004 Ford Focus
Oct 13, 2009 | 2004 Pontiac Grand Prix
204 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: