Question about 1991 Toyota Camry

1 Answer

The shoulder harness doesn't move.

This problem started after my daughter slammed the door.

Posted by on

  • Donna Portin Feb 17, 2012

    This particular model has a moving shoulder harness that travels along the door frame automatically when the door opens and closes (not the inertial type).

  • Geoffrey White
    Geoffrey White Feb 19, 2012

    I am sorry, I have no information on that type.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 3,961 Answers

Slamming the door may have shaken something loose in the inertia reel assembly (the part which locks up the belt).

In most States you aren't supposed to try to repair it, which is why that does not appear in workshop manuals. It is best to fit a replacement assembly, and again in many areas this is supposed to be a new one, rather than one from a car wreckers yard (which has been crashed).

Posted on Feb 17, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rear window doesn't stay locked


you need to move the latch closer together...

Nov 12, 2012 | 1996 Jeep Cherokee

1 Answer

Trunk won't latch closed


move the latch up slamming it knock it lower

Sep 01, 2012 | 2002 Mercury Grand Marquis

1 Answer

Left front door switches don't work


Try the switches while moving the door open and closed, it is starts to work and stops then you have a broken wire in the harness from the body to the door that runs through the rubber boot from the A pillar to the door frame.

Jun 14, 2012 | 2005 Buick LeSabre

1 Answer

How do I disable the seat belt motor


Remove the trim around the inside of the door, the motor is right there in plain sight

May 24, 2012 | 1992 Mercury Topaz

1 Answer

Infant car seat highlander2002


I am not familiar with the vehicle but car seats are not all made to fit any vehicle.
There are some that require just the lap belt most require an over the shoulder design. You will have to get the store to let you try a few in the vehicle until you find one that suits. I would expect a young child (baby) seat to require a 3 point over the shoulder style seat belt. especially if you are fitting the seat in the middle as this is the worst place in the event of a head on impact, unless you have full restraint. The other thing to remember is that children as they grow older may decide to take the shoulder straps off as you drive, making them more vulnerable. There are devices out there to help prevent this.
If your vehicle doesn't have a three point harness in the middle you should be able to get one fitted. Ask you Toyota dealer if there is an approved after market belt

Nov 17, 2011 | 2002 Toyota Highlander

1 Answer

My daughter touched the rear door lock mechanism by mistake and now it's locked although the door is open. This means the rear door can't shut properly. It doesn't unlock using the remote. ...


depends on year and model but check she hasnt pused in the lock hook on the lock ? hold the handle open and with your finger release the lock close door and try locking it ????more info needed?????

Sep 07, 2011 | Volkswagen Passat Cars & Trucks

2 Answers

My power door lock switch will not work


If none of the switches work on any of the doors, then it's a fuse/relay problem. If just one switch is the problem then check the power to the switch. Sometimes the wire harness becomes disconnected underneath the switch from slamming the doors. Hope this helps.

Jul 12, 2011 | 2003 Lincoln Navigator

1 Answer

Automatic Seatbelt Inoperable


At the bottom of the pillar between the front and rear door is a round plastic plug that pops out of the plastic cover on the pillar. Inside is the electrical connection for the automatic seat belt mechanism. DISCONNECT it. Also in same hole at the bottom of the pillar is a hex head (allen wrench) bolt. Insert the proper size hex/allen wrench (six sided) into the head of the bolt and turn clockwise (if driver side) until you hear a CLICK. This will release the shoulder harness latch that is in the upper track in the window and it let's it return to the closed door and fastened belt position. DO NOT reconnect the power that you disconnected. This keeps the latch in a stationary position so you can use it manually. On the passenger side turn the hex bolt counter clockwise to release the latch and return it to the closed door position.
Now you have a shoulder harness system that is NOT automatic but it WORKS. You will have to manually latch the shoulder harness in addition to the lap belt. A TWO STEP process just like the older Toyotas. If you really want to fix the automatic system then you need to take apart the doors to get at the track and cables and motor--NOT EASY. Or you can let dealer fix for two hundred dollars each !

Mar 23, 2009 | 1993 Mazda Protege

1 Answer

2001 town & countyr.. wife slammed sliding drivrs side door.. will not open.. have the interior panle off, are there more than 1 latch?


first how hard did she slam it... second... is the seat belt jammed into the door... basically the only fix for that is to move the handle as tho you are opening it and put your shoulder into it

Jan 27, 2009 | Chrysler Town & Country Cars & Trucks

Not finding what you are looking for?
1991 Toyota Camry Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...