Both quit at same time. where is low beam fuse..cant find it. found all other light fuses.
SOURCE: headlights not working
open up your DRL relay and look at the board see if any of your solder joins have cracks if so take a soldering gun and het joins that are cracked adding a bit of new solder plug back in and check any cracks on these joins will not let your lights operate this is common on the DRL with all hondas
SOURCE: My low beams are not working but the high beams are
your Problem My be in the Dimmer switch take the care to advanced auto or auto zone ask the to do a code test on the car it's usely free if you have a pin plug under you dash they can pull up the code and tell you where the problem lies
SOURCE: low beams don't work - both out at the same time.
DID YOU CHECK THE BULBS?
Testimonial: "spot on."
62 views
Usually answered in minutes!
×